| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Aug 2020 01:20:52 -0500
From: "Gustavo A. R. Silva" <gustavoars@...nel.org>
To: Stanislaw Gruszka <stf_xl@...pl>,
Helmut Schaa <helmut.schaa@...glemail.com>,
Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
"Gustavo A. R. Silva" <gustavoars@...nel.org>
Subject: [PATCH][next] rt2x00: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@...nel.org>
---
.../net/wireless/ralink/rt2x00/rt2400pci.c | 2 +-
.../net/wireless/ralink/rt2x00/rt2500pci.c | 2 +-
.../net/wireless/ralink/rt2x00/rt2800lib.c | 42 +++++++++----------
.../net/wireless/ralink/rt2x00/rt2800mmio.c | 1 -
.../net/wireless/ralink/rt2x00/rt2800usb.c | 1 -
drivers/net/wireless/ralink/rt2x00/rt61pci.c | 3 +-
drivers/net/wireless/ralink/rt2x00/rt73usb.c | 1 -
7 files changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
index c1ac933349d1..c8bb378148c3 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c
@@ -1291,7 +1291,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
- /* Fall through - this is a failed frame! */
+ fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
index 0859adebd860..2e015c16cd4b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c
@@ -1419,7 +1419,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
- /* Fall through - this is a failed frame! */
+ fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index a779fe771a55..fed6d21cd6ce 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -928,7 +928,7 @@ static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
case RATE_MODE_HT_GREENFIELD:
flags |= IEEE80211_TX_RC_GREEN_FIELD;
- /* fall through */
+ fallthrough;
case RATE_MODE_HT_MIX:
flags |= IEEE80211_TX_RC_MCS;
break;
@@ -2567,7 +2567,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
- /* fall through */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
break;
@@ -2576,7 +2576,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
- /* fall through */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
break;
@@ -2768,10 +2768,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
- /* fallthrough */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
- /* fallthrough */
+ fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
break;
@@ -2780,10 +2780,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
- /* fallthrough */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
- /* fallthrough */
+ fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
break;
@@ -3005,10 +3005,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
- /* fallthrough */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
- /* fallthrough */
+ fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
break;
@@ -3017,10 +3017,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
- /* fallthrough */
+ fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
- /* fallthrough */
+ fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
break;
@@ -4216,14 +4216,14 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rf->channel > 14);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
rf->channel <= 14);
- /* fall-through */
+ fallthrough;
case 2:
/* Turn on secondary PAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
rf->channel > 14);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
rf->channel <= 14);
- /* fall-through */
+ fallthrough;
case 1:
/* Turn on primary PAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
@@ -4241,12 +4241,12 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
/* Turn on tertiary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
- /* fall-through */
+ fallthrough;
case 2:
/* Turn on secondary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
- /* fall-through */
+ fallthrough;
case 1:
/* Turn on primary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
@@ -5438,10 +5438,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
- /* fall through */
+ fallthrough;
case 2:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
- /* fall through */
+ fallthrough;
case 1:
default:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
@@ -5451,10 +5451,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
- /* fall through */
+ fallthrough;
case 2:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
- /* fall through */
+ fallthrough;
case 1:
default:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
@@ -10100,10 +10100,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
switch (rx_chains) {
case 3:
spec->ht.mcs.rx_mask[2] = 0xff;
- /* fall through */
+ fallthrough;
case 2:
spec->ht.mcs.rx_mask[1] = 0xff;
- /* fall through */
+ fallthrough;
case 1:
spec->ht.mcs.rx_mask[0] = 0xff;
spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
index 110bb391c372..6e7c14757261 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -593,7 +593,6 @@ void rt2800mmio_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
- /* fallthrough */
default:
BUG();
break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 4cc64fe481a7..d08b251ec5a2 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -746,7 +746,6 @@ static void rt2800usb_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
- /* fallthrough */
default:
BUG();
break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt61pci.c b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
index eefce76fc99b..43c3cdd13710 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c
@@ -2130,7 +2130,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
break;
case 6: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
- /* Fall through - this is a failed frame! */
+ fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
@@ -2953,7 +2953,6 @@ static void rt61pci_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
- /* fallthrough */
default:
BUG();
break;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt73usb.c b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
index e908c303b677..e69793773d87 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c
@@ -2373,7 +2373,6 @@ static void rt73usb_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
- /* fallthrough */
default:
BUG();
break;
--
2.27.0
Powered by blists - more mailing lists