| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <dleftja6yhv4g2.fsf%l.stelmach@samsung.com>
Date: Wed, 26 Aug 2020 16:59:09 +0200
From: Lukasz Stelmach <l.stelmach@...sung.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Kukjin Kim <kgene@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, m.szyprowski@...sung.com,
b.zolnierkie@...sung.com
Subject: Re: [PATCH 1/3] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter
Driver
It was <2020-08-25 wto 20:44>, when Krzysztof Kozlowski wrote:
> On Tue, Aug 25, 2020 at 07:03:09PM +0200, Łukasz Stelmach wrote:
>> ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
>> connected to a CPU with a 8/16-bit bus or with an SPI. This driver
>> supports SPI connection.
>>
>> The driver has been ported from the vendor kernel for ARTIK5[2]
>> boards. Several changes were made to adapt it to the current kernel
>> which include:
>>
>> + updated DT configuration,
>> + clock configuration moved to DT,
>> + new timer, ethtool and gpio APIs
>> + dev_* instead of pr_* and custom printk() wrappers.
>>
>> [1] https://protect2.fireeye.com/v1/url?k=074e9e9d-5a9dc212-074f15d2-0cc47a31ce52-0f896a3d08738907&q=1&e=bcaebfa2-4f00-46b6-a35d-096f39710f47&u=https%3A%2F%2Fwww.asix.com.tw%2Fproducts.php%3Fop%3DpItemdetail%26PItemID%3D104%3B65%3B86%26PLine%3D65
>> [2] https://protect2.fireeye.com/v1/url?k=553869ec-08eb3563-5539e2a3-0cc47a31ce52-fc42424019c6fd8f&q=1&e=bcaebfa2-4f00-46b6-a35d-096f39710f47&u=https%3A%2F%2Fgit.tizen.org%2Fcgit%2Fprofile%2Fcommon%2Fplatform%2Fkernel%2Flinux-3.10-artik%2F
>>
>> The other ax88796 driver is for NE2000 compatible AX88796L chip. These
>> chips are not compatible. Hence, two separate drivers are required.
>
> Hi,
>
> Thanks for the driver, nice work. Few comments below.
>
Thank you. I fixed most problems and asked some question where I didn't
understand.
>>
>> Signed-off-by: Łukasz Stelmach <l.stelmach@...sung.com>
>> ---
>> drivers/net/ethernet/Kconfig | 1 +
>> drivers/net/ethernet/Makefile | 1 +
>> drivers/net/ethernet/asix/Kconfig | 20 +
>> drivers/net/ethernet/asix/Makefile | 6 +
>> drivers/net/ethernet/asix/ax88796c_ioctl.c | 293 +++++
>> drivers/net/ethernet/asix/ax88796c_ioctl.h | 21 +
>> drivers/net/ethernet/asix/ax88796c_main.c | 1373 ++++++++++++++++++++
>> drivers/net/ethernet/asix/ax88796c_main.h | 596 +++++++++
>> drivers/net/ethernet/asix/ax88796c_spi.c | 103 ++
>> drivers/net/ethernet/asix/ax88796c_spi.h | 67 +
>> 10 files changed, 2481 insertions(+)
>> create mode 100644 drivers/net/ethernet/asix/Kconfig
>> create mode 100644 drivers/net/ethernet/asix/Makefile
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.h
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.h
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.h
>>
>> diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
>> index de50e8b9e656..f3b218e45ea5 100644
>> --- a/drivers/net/ethernet/Kconfig
>> +++ b/drivers/net/ethernet/Kconfig
>> @@ -32,6 +32,7 @@ source "drivers/net/ethernet/apm/Kconfig"
>> source "drivers/net/ethernet/apple/Kconfig"
>> source "drivers/net/ethernet/aquantia/Kconfig"
>> source "drivers/net/ethernet/arc/Kconfig"
>> +source "drivers/net/ethernet/asix/Kconfig"
>> source "drivers/net/ethernet/atheros/Kconfig"
>> source "drivers/net/ethernet/aurora/Kconfig"
>> source "drivers/net/ethernet/broadcom/Kconfig"
>> diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
>> index f8f38dcb5f8a..9eb368d93607 100644
>> --- a/drivers/net/ethernet/Makefile
>> +++ b/drivers/net/ethernet/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_NET_XGENE) += apm/
>> obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
>> obj-$(CONFIG_NET_VENDOR_AQUANTIA) += aquantia/
>> obj-$(CONFIG_NET_VENDOR_ARC) += arc/
>> +obj-$(CONFIG_NET_VENDOR_ASIX) += asix/
>> obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
>> obj-$(CONFIG_NET_VENDOR_AURORA) += aurora/
>> obj-$(CONFIG_NET_VENDOR_CADENCE) += cadence/
>> diff --git a/drivers/net/ethernet/asix/Kconfig b/drivers/net/ethernet/asix/Kconfig
>> new file mode 100644
>> index 000000000000..4b127a4a659a
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/Kconfig
>> @@ -0,0 +1,20 @@
>> +#
>> +# Asix network device configuration
>> +#
>> +
>> +config NET_VENDOR_ASIX
>> + bool "Asix devices"
>> + depends on SPI
>> + help
>> + If you have a network (Ethernet) interface based on a chip from ASIX, say Y
>
> Looks like too long, did it pass checkpatch?
Yes? Let me try again. Yes, this one passed, but I missed a few other
problems. Thank you.
>> +
>> +if NET_VENDOR_ASIX
>> +
>> +config SPI_AX88796C
>> + tristate "Asix AX88796C-SPI support"
>> + depends on SPI
>> + depends on GPIOLIB
>> + help
>> + Say Y here if you intend to attach a Asix AX88796C as SPI mode
>> +
>> +endif # NET_VENDOR_ASIX
>> diff --git a/drivers/net/ethernet/asix/Makefile b/drivers/net/ethernet/asix/Makefile
>> new file mode 100644
>> index 000000000000..0bfbbb042634
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/Makefile
>> @@ -0,0 +1,6 @@
>> +#
>> +# Makefile for the Asix network device drivers.
>> +#
>> +
>> +obj-$(CONFIG_SPI_AX88796C) += ax88796c.o
>> +ax88796c-y := ax88796c_main.o ax88796c_ioctl.o ax88796c_spi.o
>> diff --git a/drivers/net/ethernet/asix/ax88796c_ioctl.c b/drivers/net/ethernet/asix/ax88796c_ioctl.c
>> new file mode 100644
>> index 000000000000..eba361e2a8b7
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_ioctl.c
>> @@ -0,0 +1,293 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#include "ax88796c_main.h"
>> +#include "ax88796c_spi.h"
>> +#include "ax88796c_ioctl.h"
>> +
>> +u8 ax88796c_check_power(struct ax88796c_device *ax_local)
>
> Looks here like pointer to const. Unless it is because of
> AX_READ_STATUS() which cannot take const?
It can. I changed other stuff in ax88796c_spi.[hc] to const too.
>> +{
>
> Please put file-scope definitions first, so this should go to the end.
I don't understand.
>> + struct spi_status ax_status;
>> +
>> + /* Check media link status first */
>> + if (netif_carrier_ok(ax_local->ndev) ||
>> + (ax_local->ps_level == AX_PS_D0) ||
>> + (ax_local->ps_level == AX_PS_D1)) {
>> + return 0;
>> + }
>> +
>> + AX_READ_STATUS(&ax_local->ax_spi, &ax_status);
>> + if (!(ax_status.status & AX_STATUS_READY))
>
> This looks buggy... AX_READ_STATUS can fail, without reporting an error.
> There is no error handling. What will be the value of ax_status? Sure,
> some stack-protector-GCC-plugins might initialize it to 0, but that's
> not a good design.
>
> There is no error handling of all SPI functions so entire driver works
> because of luck... if there is any error in the middle of some work, it
> won't spot it.
You are right this requires more work. I will do it.
>> + return 1;
>> +
>> + return 0;
>> +}
>> +
>> +u8 ax88796c_check_power_and_wake(struct ax88796c_device *ax_local)
>> +{
>> + struct spi_status ax_status;
>> + unsigned long start_time;
>> +
>> + /* Check media link status first */
>> + if (netif_carrier_ok(ax_local->ndev) ||
>> + (ax_local->ps_level == AX_PS_D0) ||
>> + (ax_local->ps_level == AX_PS_D1)) {
>> + return 0;
>> + }
>> +
>> + AX_READ_STATUS(&ax_local->ax_spi, &ax_status);
>> + if (!(ax_status.status & AX_STATUS_READY)) {
>> +
>> + /* AX88796C in power saving mode */
>> + AX_WAKEUP(&ax_local->ax_spi);
>> +
>> + /* Check status */
>> + start_time = jiffies;
>> + do {
>> + if (time_after(jiffies, start_time + HZ/2)) {
>> + netdev_err(ax_local->ndev,
>> + "timeout waiting for wakeup"
>> + " from power saving\n");
>> + break;
>> + }
>> +
>> + AX_READ_STATUS(&ax_local->ax_spi, &ax_status);
>> +
>> + } while (!(ax_status.status & AX_STATUS_READY));
>> +
>> + ax88796c_set_power_saving(ax_local, AX_PS_D0);
>> +
>> + return 1;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void ax88796c_set_power_saving(struct ax88796c_device *ax_local, u8 ps_level)
>> +{
>> + u16 pmm;
>> +
>> + if (ps_level == AX_PS_D1)
>> + pmm = PSCR_PS_D1;
>> + else if (ps_level == AX_PS_D2)
>> + pmm = PSCR_PS_D2;
>> + else
>> + pmm = PSCR_PS_D0;
>> +
>> + AX_WRITE(&ax_local->ax_spi, (AX_READ(&ax_local->ax_spi, P0_PSCR)
>> + & PSCR_PS_MASK) | pmm, P0_PSCR);
>> +}
>> +
>> +int ax88796c_mdio_read(struct net_device *ndev, int phy_id, int loc)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + unsigned long start_time;
>> +
>> + AX_WRITE(&ax_local->ax_spi, MDIOCR_RADDR(loc)
>> + | MDIOCR_FADDR(phy_id) | MDIOCR_READ, P2_MDIOCR);
>> +
>> + start_time = jiffies;
>> + while ((AX_READ(&ax_local->ax_spi, P2_MDIOCR) & MDIOCR_VALID) == 0) {
>> + if (time_after(jiffies, start_time + HZ/100))
>> + return -EBUSY;
>> + }
>> +
>> + return AX_READ(&ax_local->ax_spi, P2_MDIODR);
>> +}
>> +
>> +void
>> +ax88796c_mdio_write(struct net_device *ndev, int phy_id, int loc, int val)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + unsigned long start_time;
>> +
>> + AX_WRITE(&ax_local->ax_spi, val, P2_MDIODR);
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + MDIOCR_RADDR(loc) | MDIOCR_FADDR(phy_id)
>> + | MDIOCR_WRITE, P2_MDIOCR);
>> +
>> + start_time = jiffies;
>> + while ((AX_READ(&ax_local->ax_spi, P2_MDIOCR) & MDIOCR_VALID) == 0) {
>> + if (time_after(jiffies, start_time + HZ/100))
>> + return;
>> + }
>> +
>> + if (loc == MII_ADVERTISE) {
>> + AX_WRITE(&ax_local->ax_spi, (BMCR_FULLDPLX | BMCR_ANRESTART |
>> + BMCR_ANENABLE | BMCR_SPEED100), P2_MDIODR);
>> + AX_WRITE(&ax_local->ax_spi, (MDIOCR_RADDR(MII_BMCR) |
>> + MDIOCR_FADDR(phy_id) | MDIOCR_WRITE),
>> + P2_MDIOCR);
>> +
>> + start_time = jiffies;
>> + while ((AX_READ(&ax_local->ax_spi, P2_MDIOCR)
>> + & MDIOCR_VALID) == 0) {
>> + if (time_after(jiffies, start_time + HZ/100))
>> + return;
>> + }
>> + }
>> +}
>> +
>> +void ax88796c_set_csums(struct ax88796c_device *ax_local)
>> +{
>> + if (ax_local->checksum & AX_RX_CHECKSUM) {
>> + AX_WRITE(&ax_local->ax_spi, COERCR0_DEFAULT, P4_COERCR0);
>> + AX_WRITE(&ax_local->ax_spi, COERCR1_DEFAULT, P4_COERCR1);
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COERCR0);
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COERCR1);
>> + }
>> +
>> + if (ax_local->checksum & AX_TX_CHECKSUM) {
>> + AX_WRITE(&ax_local->ax_spi, COETCR0_DEFAULT, P4_COETCR0);
>> + AX_WRITE(&ax_local->ax_spi, COETCR1_TXPPPE, P4_COETCR1);
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COETCR0);
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COETCR1);
>> + }
>> +}
>> +
>> +static void ax88796c_get_drvinfo(struct net_device *ndev,
>> + struct ethtool_drvinfo *info)
>> +{
>> + /* Inherit standard device info */
>> + strncpy(info->driver, DRV_NAME, sizeof(info->driver));
>> + strncpy(info->version, DRV_VERSION, sizeof(info->version));
>> +}
>> +
>> +static u32 ax88796c_get_link(struct net_device *ndev)
>> +{
>> + u32 link;
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u8 power;
>> +
>> + down(&ax_local->spi_lock);
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + link = mii_link_ok(&ax_local->mii);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> + up(&ax_local->spi_lock);
>> +
>> + return link;
>> +
>> +
>
> Empty lines.
Fixed.
>> +}
>> +
>> +static u32 ax88796c_get_msglevel(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + return ax_local->msg_enable;
>> +}
>> +
>> +static void ax88796c_set_msglevel(struct net_device *ndev, u32 level)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + ax_local->msg_enable = level;
>> +}
>> +
>> +
>
> One line break.
Fixed.
>> +static int
>> +ax88796c_get_link_ksettings(struct net_device *ndev,
>> + struct ethtool_link_ksettings *cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u8 power;
>> +
>> + down(&ax_local->spi_lock);
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + mii_ethtool_get_link_ksettings(&ax_local->mii, cmd);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> + up(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +ax88796c_set_link_ksettings(struct net_device *ndev,
>> + const struct ethtool_link_ksettings *cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u8 power;
>> +
>> + down(&ax_local->spi_lock);
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + mii_ethtool_set_link_ksettings(&ax_local->mii, cmd);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> + up(&ax_local->spi_lock);
>> + return 0;
>> +
>
> Line before return, not after.
>
Fixed.
>> +}
>> +
>> +static int ax88796c_nway_reset(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> + u8 power;
>> +
>> + down(&ax_local->spi_lock);
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + ret = mii_nway_restart(&ax_local->mii);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> + up(&ax_local->spi_lock);
>> + return ret;
>> +}
>> +
>> +static u32 ax88796c_ethtool_getmsglevel(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + return ax_local->msg_enable;
>> +}
>> +
>> +static void ax88796c_ethtool_setmsglevel(struct net_device *ndev, u32 level)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + ax_local->msg_enable = level;
>> +}
>> +
>> +struct ethtool_ops ax88796c_ethtool_ops = {
>> + .get_drvinfo = ax88796c_get_drvinfo,
>> + .get_link = ax88796c_get_link,
>> + .get_msglevel = ax88796c_get_msglevel,
>> + .set_msglevel = ax88796c_set_msglevel,
>> + .get_link_ksettings = ax88796c_get_link_ksettings,
>> + .set_link_ksettings = ax88796c_set_link_ksettings,
>> + .nway_reset = ax88796c_nway_reset,
>> + .get_msglevel = ax88796c_ethtool_getmsglevel,
>> + .set_msglevel = ax88796c_ethtool_setmsglevel,
>> +};
>> +
>> +int ax88796c_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> + u8 power;
>> +
>> + down(&ax_local->spi_lock);
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + ret = generic_mii_ioctl(&ax_local->mii, if_mii(ifr), cmd, NULL);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> + up(&ax_local->spi_lock);
>> +
>> + return ret;
>> +}
>> +
>> diff --git a/drivers/net/ethernet/asix/ax88796c_ioctl.h b/drivers/net/ethernet/asix/ax88796c_ioctl.h
>> new file mode 100644
>> index 000000000000..bafd573bd813
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_ioctl.h
>> @@ -0,0 +1,21 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#ifndef _AX88796C_IOCTL_H
>> +#define _AX88796C_IOCTL_H
>> +
>> +extern struct ethtool_ops ax88796c_ethtool_ops;
>> +
>> +u8 ax88796c_check_power(struct ax88796c_device *ax_local);
>> +u8 ax88796c_check_power_and_wake(struct ax88796c_device *ax_local);
>> +void ax88796c_set_power_saving(struct ax88796c_device *ax_local, u8 ps_level);
>> +int ax88796c_mdio_read(struct net_device *dev, int phy_id, int loc);
>> +void ax88796c_mdio_write(struct net_device *dev, int phy_id, int loc, int val);
>> +void ax88796c_set_csums(struct ax88796c_device *ax_local);
>> +int ax88796c_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
>> +
>> +#endif
>> diff --git a/drivers/net/ethernet/asix/ax88796c_main.c b/drivers/net/ethernet/asix/ax88796c_main.c
>> new file mode 100644
>> index 000000000000..c28cfb931319
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_main.c
>> @@ -0,0 +1,1373 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#include "ax88796c_main.h"
>> +#include "ax88796c_ioctl.h"
>> +
>> +static int comp;
>> +static int ps_level = AX_PS_D0;
>> +static int msg_enable = NETIF_MSG_PROBE |
>> + NETIF_MSG_LINK |
>> + /* NETIF_MSG_TIMER | */
>> + NETIF_MSG_RX_ERR |
>> + NETIF_MSG_TX_ERR |
>> + /* NETIF_MSG_TX_QUEUED | */
>> + /* NETIF_MSG_INTR | */
>> + /* NETIF_MSG_TX_DONE | */
>> + /* NETIF_MSG_RX_STATUS | */
>> + /* NETIF_MSG_PKTDATA | */
>> + /* NETIF_MSG_HW | */
>> + NETIF_MSG_WOL;
>> +
>> +module_param(comp, int, 0);
>> +MODULE_PARM_DESC(comp, "0=Non-Compression Mode, 1=Compression Mode");
>> +
>> +module_param(ps_level, int, 0);
>> +MODULE_PARM_DESC(ps_level,
>> + "Power Saving Level (0:disable 1:level 1 2:level 2)");
>> +
>> +module_param(msg_enable, int, 0);
>> +MODULE_PARM_DESC(msg_enable, "Message mask (see linux/netdevice.h for bitmap)");
>> +
>> +static char *macaddr;
>> +module_param(macaddr, charp, 0);
>> +MODULE_PARM_DESC(macaddr, "MAC address");
>
> I think MAC address as param is not accepted in mainline...
>
$ git grep MODULE_PARM_DESC\(macaddr -- drivers/net | wc -l
6
>> +
>
>> +MODULE_AUTHOR("ASIX");
>> +MODULE_DESCRIPTION("ASIX AX88796C SPI Ethernet driver");
>> +MODULE_LICENSE("GPL");
>
> These three usually go to the end of file.
>
Fixed.
>> +
>> +static void ax88796c_dump_regs(struct ax88796c_device *ax_local)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + u8 i, j;
>> +
>> + netdev_info(ndev,
>> + " Page0 Page1 Page2 Page3 "
>> + "Page4 Page5 Page6 Page7\n");
>> + for (i = 0; i < 0x20; i += 2) {
>> + netdev_info(ndev, "0x%02x ", i);
>> + for (j = 0; j < 8; j++) {
>> + netdev_info(ndev, "0x%04x ",
>> + AX_READ(&ax_local->ax_spi, j * 0x20 + i));
>> + }
>> + netdev_info(ndev, "\n");
>> + }
>> + netdev_info(ndev, "\n");
>> +}
>> +
>> +static void ax88796c_dump_phy_regs(struct ax88796c_device *ax_local)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + int i;
>> +
>> + netdev_info(ndev, "Dump PHY registers:\n");
>> + for (i = 0; i < 6; i++) {
>> + netdev_info(ndev, " MR%d = 0x%04x\n", i,
>> + ax88796c_mdio_read(ax_local->ndev,
>> + ax_local->mii.phy_id, i));
>> + }
>> +}
>> +
>> +static void ax88796c_watchdog(struct ax88796c_device *ax_local)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + u16 phy_status;
>> + unsigned long time_to_chk = AX88796C_WATCHDOG_PERIOD;
>> +
>> + if (ax88796c_check_power(ax_local)) {
>> + mod_timer(&ax_local->watchdog, jiffies + time_to_chk);
>> + return;
>> + }
>> +
>> + ax88796c_set_power_saving(ax_local, AX_PS_D0);
>> +
>> + phy_status = AX_READ(&ax_local->ax_spi, P0_PSCR);
>> + if (phy_status & PSCR_PHYLINK) {
>> +
>> + ax_local->w_state = ax_nop;
>> + time_to_chk = 0;
>> +
>> + } else if (!(phy_status & PSCR_PHYCOFF)) {
>> + /* The ethernet cable has been plugged */
>> + if (ax_local->w_state == chk_cable) {
>> + if (netif_msg_timer(ax_local))
>> + netdev_info(ndev, "Cable connected\n");
>> +
>> + ax_local->w_state = chk_link;
>> + ax_local->w_ticks = 0;
>> + } else {
>> + if (netif_msg_timer(ax_local))
>> + netdev_info(ndev, "Check media status\n");
>> +
>> + if (++ax_local->w_ticks == AX88796C_WATCHDOG_RESTART) {
>> + if (netif_msg_timer(ax_local))
>> + netdev_info(ndev, "Restart autoneg\n");
>> + ax88796c_mdio_write(ndev,
>> + ax_local->mii.phy_id, MII_BMCR,
>> + (BMCR_SPEED100 | BMCR_ANENABLE |
>> + BMCR_ANRESTART));
>> +
>> + if (netif_msg_hw(ax_local))
>> + ax88796c_dump_phy_regs(ax_local);
>> + ax_local->w_ticks = 0;
>> + }
>> + }
>> + } else {
>> + if (netif_msg_timer(ax_local))
>> + netdev_info(ndev, "Check cable status\n");
>> +
>> + ax_local->w_state = chk_cable;
>> + }
>> +
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + if (time_to_chk)
>> + mod_timer(&ax_local->watchdog, jiffies + time_to_chk);
>> +}
>> +
>> +static void ax88796c_watchdog_timer(struct timer_list *t)
>> +{
>> + struct ax88796c_device *ax_local = from_timer(ax_local, t, watchdog);
>> + //struct net_device *ndev = ax_local->ndev;
>
> Clean up.
>
Done.
>> +
>> + set_bit(EVENT_WATCHDOG, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +}
>> +
>> +static int ax88796c_soft_reset(struct ax88796c_device *ax_local)
>> +{
>> + unsigned long start;
>> + u16 temp;
>> +
>> + AX_WRITE(&ax_local->ax_spi, PSR_RESET, P0_PSR);
>> + AX_WRITE(&ax_local->ax_spi, PSR_RESET_CLR, P0_PSR);
>> +
>> + start = jiffies;
>> + while (!(AX_READ(&ax_local->ax_spi, P0_PSR) & PSR_DEV_READY)) {
>> + if (time_after(jiffies, start + (160 * HZ / 1000))) {
>> + dev_err(&ax_local->spi->dev,
>> + "timeout waiting for reset completion\n");
>> + return -1;
>> + }
>> + }
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P4_SPICR);
>> + if (ax_local->capabilities & AX_CAP_COMP) {
>> + AX_WRITE(&ax_local->ax_spi,
>> + (temp | SPICR_RCEN | SPICR_QCEN), P4_SPICR);
>> + ax_local->ax_spi.comp = 1;
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi,
>> + (temp & ~(SPICR_RCEN | SPICR_QCEN)), P4_SPICR);
>> + ax_local->ax_spi.comp = 0;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_reload_eeprom(struct ax88796c_device *ax_local)
>> +{
>> + unsigned long start;
>> +
>> + AX_WRITE(&ax_local->ax_spi, EECR_RELOAD, P3_EECR);
>> +
>> + start = jiffies;
>> + while (!(AX_READ(&ax_local->ax_spi, P0_PSR) & PSR_DEV_READY)) {
>> + if (time_after(jiffies, start + (2 * HZ / 100))) {
>> + dev_err(&ax_local->spi->dev,
>> + "timeout waiting for reload eeprom\n");
>> + return -1;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_set_hw_multicast(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u16 rx_ctl = RXCR_AB;
>> + int mc_count = netdev_mc_count(ndev);
>> +
>> + memset(ax_local->multi_filter, 0, AX_MCAST_FILTER_SIZE);
>> +
>> + if (ndev->flags & IFF_PROMISC) {
>> + rx_ctl |= RXCR_PRO;
>> +
>> + } else if (ndev->flags & IFF_ALLMULTI
>> + || mc_count > AX_MAX_MCAST) {
>> + rx_ctl |= RXCR_AMALL;
>> +
>> + } else if (mc_count == 0) {
>> + /* just broadcast and directed */
>> + } else {
>> + u32 crc_bits;
>> + int i;
>> + struct netdev_hw_addr *ha;
>> + netdev_for_each_mc_addr(ha, ndev) {
>> + crc_bits = ether_crc(ETH_ALEN, ha->addr);
>> + ax_local->multi_filter[crc_bits >> 29] |=
>> + (1 << ((crc_bits >> 26) & 7));
>> + }
>> +
>> + for (i = 0; i < 4; i++) {
>> + AX_WRITE(&ax_local->ax_spi,
>> + ((ax_local->multi_filter[i*2+1] << 8) |
>> + ax_local->multi_filter[i*2]), P3_MFAR(i));
>> +
>> + }
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi, rx_ctl, P2_RXCR);
>> +
>
> No need for empty line.
>
Fixed.
>> +}
>> +
>> +#if 0
>
> Please comment why it is commented out.
>
Always has been (-; This is how it came from the vendor I missed it when
I focused on making things work. I will investigate it and either
uncomment or remove it.
>> +static void ax88796c_set_multicast(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + set_bit(EVENT_SET_MULTI, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +}
>> +#endif
>> +
>> +static void ax88796c_set_mac_addr(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[4] << 8) |
>> + (u16)ndev->dev_addr[5]), P3_MACASR0);
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[2] << 8) |
>> + (u16)ndev->dev_addr[3]), P3_MACASR1);
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[0] << 8) |
>> + (u16)ndev->dev_addr[1]), P3_MACASR2);
>> +}
>> +
>> +static int ax88796c_set_mac_address(struct net_device *ndev, void *p)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sockaddr *addr = p;
>> +
>> + if (!is_valid_ether_addr(addr->sa_data))
>> + return -EADDRNOTAVAIL;
>> +
>> + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + ax88796c_set_mac_addr(ndev);
>> +
>> + up(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_load_mac_addr(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u16 temp;
>> +
>> + /* Read the MAC address from AX88796C */
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR0);
>> + ndev->dev_addr[5] = (u8)temp;
>> + ndev->dev_addr[4] = (u8)(temp >> 8);
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR1);
>> + ndev->dev_addr[3] = (u8)temp;
>> + ndev->dev_addr[2] = (u8)(temp >> 8);
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR2);
>> + ndev->dev_addr[1] = (u8)temp;
>> + ndev->dev_addr[0] = (u8)(temp >> 8);
>> +
>> + /* Supported for no EEPROM */
>> + if (!is_valid_ether_addr(ndev->dev_addr)) {
>> + if (macaddr && mac_pton(macaddr, ndev->dev_addr))
>> + return 0;
>> +
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&ax_local->spi->dev, "Use random MAC address\n");
>> +
>> + random_ether_addr(ndev->dev_addr);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_proc_tx_hdr(struct tx_pkt_info *info, u8 ip_summed)
>> +{
>> + u16 pkt_len_bar = (~info->pkt_len & TX_HDR_SOP_PKTLENBAR);
>> +
>> + /* Prepare SOP header */
>> + info->sop.flags_len = info->pkt_len |
>> + (ip_summed == CHECKSUM_NONE ? TX_HDR_SOP_DICF : 0);
>> +
>> + info->sop.seq_lenbar = ((info->seq_num << 11) & TX_HDR_SOP_SEQNUM)
>> + | pkt_len_bar;
>> + cpu_to_be16s(&info->sop.flags_len);
>> + cpu_to_be16s(&info->sop.seq_lenbar);
>> +
>> + /* Prepare Segment header */
>> + info->seg.flags_seqnum_seglen = TX_HDR_SEG_FS | TX_HDR_SEG_LS
>> + | info->pkt_len;
>> +
>> + info->seg.eo_so_seglenbar = pkt_len_bar;
>> +
>> + cpu_to_be16s(&info->seg.flags_seqnum_seglen);
>> + cpu_to_be16s(&info->seg.eo_so_seglenbar);
>> +
>> + /* Prepare EOP header */
>> + info->eop.seq_len = ((info->seq_num << 11) &
>> + TX_HDR_EOP_SEQNUM) | info->pkt_len;
>> + info->eop.seqbar_lenbar = ((~info->seq_num << 11) &
>> + TX_HDR_EOP_SEQNUMBAR) | pkt_len_bar;
>> +
>> + cpu_to_be16s(&info->eop.seq_len);
>> + cpu_to_be16s(&info->eop.seqbar_lenbar);
>> +}
>> +
>> +static int
>> +ax88796c_check_free_pages(struct ax88796c_device *ax_local, u8 need_pages)
>> +{
>> + u8 free_pages;
>> + u16 tmp;
>> +
>> + free_pages = AX_READ(&ax_local->ax_spi, P0_TFBFCR) & TX_FREEBUF_MASK;
>> + if (free_pages < need_pages) {
>> + /* schedule free page interrupt */
>> + tmp = AX_READ(&ax_local->ax_spi, P0_TFBFCR)
>> + & TFBFCR_SCHE_FREE_PAGE;
>> + AX_WRITE(&ax_local->ax_spi, tmp | TFBFCR_TX_PAGE_SET |
>> + TFBFCR_SET_FREE_PAGE(need_pages),
>> + P0_TFBFCR);
>> + return -ENOMEM;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct sk_buff *
>> +ax88796c_tx_fixup(struct net_device *ndev, struct sk_buff_head *q)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sk_buff *skb, *tx_skb;
>> + struct tx_pkt_info *info;
>> + struct skb_data *entry;
>> + int headroom;
>> + int tailroom;
>> + u8 need_pages;
>> + u16 tol_len, pkt_len;
>> + u8 padlen, seq_num;
>> + u8 spi_len = ax_local->ax_spi.comp ? 1 : 4;
>> +
>> + if (skb_queue_empty(q))
>> + return NULL;
>> +
>> + skb = skb_peek(q);
>> + pkt_len = skb->len;
>> + need_pages = (pkt_len + TX_OVERHEAD + 127) >> 7;
>> + if (ax88796c_check_free_pages(ax_local, need_pages) != 0)
>> + return NULL;
>> +
>> + headroom = skb_headroom(skb);
>> + tailroom = skb_tailroom(skb);
>> + padlen = ((pkt_len + 3) & 0x7FC) - pkt_len;
>> + tol_len = ((pkt_len + 3) & 0x7FC) +
>> + TX_OVERHEAD + TX_EOP_SIZE + spi_len;
>> + seq_num = ++ax_local->seq_num & 0x1F;
>> +
>> + info = (struct tx_pkt_info *) skb->cb;
>> + info->pkt_len = pkt_len;
>> +
>> + if ((!skb_cloned(skb)) &&
>> + (headroom >= (TX_OVERHEAD + spi_len)) &&
>> + (tailroom >= (padlen + TX_EOP_SIZE))) {
>> +
>> + info->seq_num = seq_num;
>> + ax88796c_proc_tx_hdr(info, skb->ip_summed);
>> +
>> + /* SOP and SEG header */
>> + memcpy(skb_push(skb, TX_OVERHEAD), &info->sop, TX_OVERHEAD);
>> +
>> + /* Write SPI TXQ header */
>> + memcpy(skb_push(skb, spi_len), tx_cmd_buf, spi_len);
>> +
>> + /* Make 32-bit aligment */
>> + skb_put(skb, padlen);
>> +
>> + /* EOP header */
>> + memcpy(skb_put(skb, TX_EOP_SIZE), &info->eop, TX_EOP_SIZE);
>> +
>> + tx_skb = skb;
>> + skb_unlink(skb, q);
>> +
>> + } else {
>> +
>> + tx_skb = alloc_skb(tol_len, GFP_KERNEL);
>> + if (!tx_skb)
>> + return NULL;
>> +
>> + /* Write SPI TXQ header */
>> + memcpy(skb_put(tx_skb, spi_len), tx_cmd_buf, spi_len);
>> +
>> + info->seq_num = seq_num;
>> + ax88796c_proc_tx_hdr(info, skb->ip_summed);
>> +
>> + /* SOP and SEG header */
>> + memcpy(skb_put(tx_skb, TX_OVERHEAD),
>> + &info->sop, TX_OVERHEAD);
>> +
>> + /* Packet */
>> + memcpy(skb_put(tx_skb, ((pkt_len + 3) & 0xFFFC)),
>> + skb->data, pkt_len);
>> +
>> + /* EOP header */
>> + memcpy(skb_put(tx_skb, TX_EOP_SIZE),
>> + &info->eop, TX_EOP_SIZE);
>> +
>> + skb_unlink(skb, q);
>> + dev_kfree_skb(skb);
>> + }
>> +
>> + entry = (struct skb_data *) tx_skb->cb;
>> + memset(entry, 0, sizeof(*entry));
>> + entry->len = pkt_len;
>> +
>> + if (netif_msg_pktdata(ax_local)) {
>> + int loop;
>> + netdev_info(ndev, "TX packet len %d, total len %d, seq %d\n",
>> + pkt_len, tx_skb->len, seq_num);
>> +
>> + netdev_info(ndev, " Dump SPI Header:\n ");
>> + for (loop = 0; loop < 4; loop++)
>> + netdev_info(ndev, "%02x ", *(tx_skb->data + loop));
>> +
>> + netdev_info(ndev, "\n");
>> +
>> + netdev_info(ndev, " Dump TX SOP:\n ");
>> + for (loop = 0; loop < TX_OVERHEAD; loop++)
>> + netdev_info(ndev, "%02x ", *(tx_skb->data + 4 + loop));
>> +
>> + netdev_info(ndev, "\n");
>> +
>> + netdev_info(ndev, " Dump TX packet:");
>> + for (loop = TX_OVERHEAD + 4;
>> + loop < (tx_skb->len - TX_EOP_SIZE); loop++) {
>> + if (((loop + 8) % 16) == 0)
>> + netdev_info(ndev, "\n ");
>> + netdev_info(ndev, "%02x ", *(tx_skb->data + loop));
>> + }
>> + netdev_info(ndev, "\n");
>> +
>> + netdev_info(ndev, " Dump TX EOP:\n %02x %02x %02x %02x\n",
>> + *(tx_skb->data + tx_skb->len - 4),
>> + *(tx_skb->data + tx_skb->len - 3),
>> + *(tx_skb->data + tx_skb->len - 2),
>> + *(tx_skb->data + tx_skb->len - 1));
>> + }
>> +
>> + return tx_skb;
>> +}
>> +
>> +static int ax88796c_hard_xmit(struct ax88796c_device *ax_local)
>> +{
>> + struct sk_buff *tx_skb;
>> + struct skb_data *entry;
>> +
>> + tx_skb = ax88796c_tx_fixup(ax_local->ndev, &ax_local->tx_wait_q);
>> +
>> + if (!tx_skb)
>> + return 0;
>> +
>> + entry = (struct skb_data *)tx_skb->cb;
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + (TSNR_TXB_START | TSNR_PKT_CNT(1)), P0_TSNR);
>> +
>> + axspi_write_txq(&ax_local->ax_spi, tx_skb->data, tx_skb->len);
>> +
>> + if (((AX_READ(&ax_local->ax_spi, P0_TSNR) & TXNR_TXB_IDLE) == 0) ||
>> + ((ISR_TXERR & AX_READ(&ax_local->ax_spi, P0_ISR)) != 0)) {
>> +
>> + /* Ack tx error int */
>> + AX_WRITE(&ax_local->ax_spi, ISR_TXERR, P0_ISR);
>> +
>> + ax_local->stats.tx_dropped++;
>> +
>> + if (netif_msg_tx_err(ax_local))
>> + netdev_err(ax_local->ndev,
>> + "TX FIFO error, re-initialize the TX bridge\n");
>> +
>> + /* Reinitial tx bridge */
>> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT |
>> + AX_READ(&ax_local->ax_spi, P0_TSNR), P0_TSNR);
>> + ax_local->seq_num = 0;
>> + } else {
>> + ax_local->stats.tx_packets++;
>> + ax_local->stats.tx_bytes += entry->len;
>> + }
>> +
>> + entry->state = tx_done;
>> + dev_kfree_skb(tx_skb);
>> +
>> + return 1;
>> +}
>> +
>> +static int
>> +ax88796c_start_xmit(struct sk_buff *skb, struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + skb_queue_tail(&ax_local->tx_wait_q, skb);
>> + if (skb_queue_len(&ax_local->tx_wait_q) > TX_QUEUE_HIGH_WATER) {
>> + if (netif_msg_tx_queued(ax_local))
>> + netdev_err(ndev, "Too much TX packets in queue %d\n",
>> + skb_queue_len(&ax_local->tx_wait_q));
>> +
>> + netif_stop_queue(ndev);
>> + }
>> +
>> + set_bit(EVENT_TX, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +
>> + return NETDEV_TX_OK;
>> +
>> +}
>> +
>> +
>> +static inline void
>> +ax88796c_skb_return(struct ax88796c_device *ax_local, struct sk_buff *skb,
>> + struct rx_header *rxhdr)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + int status;
>> +
>> + do {
>> + if (!(ax_local->checksum & AX_RX_CHECKSUM))
>> + break;
>> +
>> + /* checksum error bit is set */
>> + if ((rxhdr->flags & RX_HDR3_L3_ERR) ||
>> + (rxhdr->flags & RX_HDR3_L4_ERR))
>> + break;
>> +
>> + if ((rxhdr->flags & RX_HDR3_L4_TYPE_TCP) ||
>> + (rxhdr->flags & RX_HDR3_L4_TYPE_UDP)) {
>> + skb->ip_summed = CHECKSUM_UNNECESSARY;
>> + }
>> + } while (0);
>> +
>> + ax_local->stats.rx_packets++;
>> + ax_local->stats.rx_bytes += skb->len;
>> + skb->dev = ndev;
>> +
>> + skb->truesize = skb->len + sizeof(struct sk_buff);
>> + skb->protocol = eth_type_trans(skb, ax_local->ndev);
>> +
>> + if (netif_msg_rx_status(ax_local))
>> + netdev_info(ndev, "< rx, len %zu, type 0x%x\n",
>> + skb->len + sizeof(struct ethhdr), skb->protocol);
>> +
>> + status = netif_rx(skb);
>> + if (status != NET_RX_SUCCESS && netif_msg_rx_err(ax_local))
>> + netdev_info(ndev, "netif_rx status %d\n", status);
>> +}
>> +
>> +static void dump_packet(struct net_device *ndev, const char *msg, int len, const char *data)
>> +{
>
> Too long lines.
>
Fixed.
>> + netdev_printk(KERN_DEBUG, ndev, DRV_NAME ": %s - packet len:%d\n", msg, len);
>> + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1,
>> + data, len, true);
>> +}
>> +
>> +static void
>> +ax88796c_rx_fixup(struct ax88796c_device *ax_local, struct sk_buff *rx_skb)
>> +{
>> + struct rx_header *rxhdr = (struct rx_header *) rx_skb->data;
>> + struct net_device *ndev = ax_local->ndev;
>> + u16 len;
>> +
>> + be16_to_cpus(&rxhdr->flags_len);
>> + be16_to_cpus(&rxhdr->seq_lenbar);
>> + be16_to_cpus(&rxhdr->flags);
>> +
>> + if ((((short)rxhdr->flags_len) & RX_HDR1_PKT_LEN) !=
>> + (~((short)rxhdr->seq_lenbar) & 0x7FF)) {
>> + if (netif_msg_rx_err(ax_local)) {
>> + int i;
>> + netdev_err(ndev, "Header error\n");
>> + //netdev_err(ndev, "Dump received frame\n");
>> + /* for (i = 0; i < rx_skb->len; i++) { */
>> + /* netdev_err(ndev, "%02x ", */
>> + /* *(rx_skb->data + i)); */
>> + /* if (((i + 1) % 16) == 0) */
>> + /* netdev_err(ndev, "\n"); */
>> + /* } */
>> + dump_packet(ndev, __func__, rx_skb->len, rx_skb->data);
>> + }
>> + ax_local->stats.rx_frame_errors++;
>> + kfree_skb(rx_skb);
>> + return;
>> + }
>> +
>> + if ((rxhdr->flags_len & RX_HDR1_MII_ERR) ||
>> + (rxhdr->flags_len & RX_HDR1_CRC_ERR)) {
>> + if (netif_msg_rx_err(ax_local))
>> + netdev_err(ndev, "CRC or MII error\n");
>> +
>> + ax_local->stats.rx_crc_errors++;
>> + kfree_skb(rx_skb);
>> + return;
>> + }
>> +
>> + len = rxhdr->flags_len & RX_HDR1_PKT_LEN;
>> + if (netif_msg_pktdata(ax_local)) {
>> + int loop;
>> + netdev_info(ndev, "RX data, total len %d, packet len %d\n",
>> + rx_skb->len, len);
>> +
>> + netdev_info(ndev, " Dump RX packet header:\n ");
>> + for (loop = 0; loop < sizeof(*rxhdr); loop++)
>> + netdev_info(ndev, "%02x ", *(rx_skb->data + loop));
>> +
>> + netdev_info(ndev, "\n Dump RX packet:");
>> + for (loop = 0; loop < len; loop++) {
>> + if ((loop % 16) == 0)
>> + netdev_info(ndev, "\n ");
>> + netdev_info(ndev, "%02x ",
>> + *(rx_skb->data + loop + sizeof(*rxhdr)));
>> + }
>> + netdev_info(ndev, "\n");
>> + }
>> +
>> + skb_pull(rx_skb, sizeof(*rxhdr));
>> + __pskb_trim(rx_skb, len);
>> +
>> + return ax88796c_skb_return(ax_local, rx_skb, rxhdr);
>> +}
>> +
>> +static int ax88796c_receive(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sk_buff *skb;
>> + struct skb_data *entry;
>> + u16 w_count, pkt_len;
>> + u8 pkt_cnt;
>> +
>> + /* check rx packet and total word count */
>> + AX_WRITE(&ax_local->ax_spi, AX_READ(&ax_local->ax_spi, P0_RTWCR)
>> + | RTWCR_RX_LATCH, P0_RTWCR);
>> +
>> + pkt_cnt = AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_PKT_MASK;
>> + if (!pkt_cnt)
>> + return 0;
>> +
>> + pkt_len = AX_READ(&ax_local->ax_spi, P0_RCPHR) & 0x7FF;
>> +
>> + w_count = ((pkt_len + 6 + 3) & 0xFFFC) >> 1;
>> +
>> + skb = alloc_skb((w_count * 2), GFP_KERNEL);
>> + if (!skb) {
>> + if (netif_msg_rx_err(ax_local))
>> + netdev_err(ndev,
>> + "Couldn't allocate a sk_buff of size %d\n",
>> + w_count * 2);
>> +
>> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_DISCARD, P0_RXBCR1);
>> + return 0;
>> + }
>> + entry = (struct skb_data *) skb->cb;
>> +
>> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_START | w_count, P0_RXBCR1);
>> +
>> + axspi_read_rxq(&ax_local->ax_spi,
>> + skb_put(skb, w_count * 2), skb->len);
>> +
>> + /* Check if rx bridge is idle */
>> + if ((AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_RXB_IDLE) == 0) {
>> +
>> + if (netif_msg_rx_err(ax_local))
>> + netdev_err(ndev, "Rx Bridge is not idle\n");
>> + AX_WRITE(&ax_local->ax_spi, RXBCR2_RXB_REINIT, P0_RXBCR2);
>> +
>> + entry->state = rx_err;
>> +
>> + } else {
>> +
>> + entry->state = rx_done;
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi, ISR_RXPKT, P0_ISR);
>> +
>> + ax88796c_rx_fixup(ax_local, skb);
>> +
>> + return 1;
>> +}
>> +
>> +static void ax88796c_check_media(struct ax88796c_device *ax_local)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + u16 bmsr, bmcr;
>> +
>> + if (netif_msg_hw(ax_local))
>> + ax88796c_dump_phy_regs(ax_local);
>> +
>> + bmsr = ax88796c_mdio_read(ndev,
>> + ax_local->mii.phy_id, MII_BMSR);
>> +
>> + if (!(bmsr & BMSR_LSTATUS) && netif_carrier_ok(ndev)) {
>> +
>> + netif_carrier_off(ndev);
>> + if (netif_msg_link(ax_local))
>> + netdev_info(ndev, "link down\n");
>> +
>> + ax_local->w_state = chk_cable;
>> + mod_timer(&ax_local->watchdog,
>> + jiffies + AX88796C_WATCHDOG_PERIOD);
>> +
>> + } else if ((bmsr & BMSR_LSTATUS) &&
>> + !netif_carrier_ok(ndev)) {
>> + bmcr = ax88796c_mdio_read(ndev,
>> + ax_local->mii.phy_id, MII_BMCR);
>> + if (netif_msg_link(ax_local))
>> + netdev_info(ndev, "link up, %sMbps, %s-duplex\n",
>> + (bmcr & BMCR_SPEED100) ? "100" : "10",
>> + (bmcr & BMCR_FULLDPLX) ? "full" : "half");
>> +
>> + netif_carrier_on(ndev);
>> + }
>> +
>> + return;
>> +}
>> +
>> +static int ax88796c_process_isr(struct ax88796c_device *ax_local)
>> +{
>> + u16 isr;
>> + u8 done = 0;
>> + struct net_device *ndev = ax_local->ndev;
>> +
>> + isr = AX_READ(&ax_local->ax_spi, P0_ISR);
>> + AX_WRITE(&ax_local->ax_spi, isr, P0_ISR);
>> +
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, " ISR 0x%04x\n", isr);
>> +
>> + if (isr & ISR_TXERR) {
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, " TXERR interrupt\n");
>> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT, P0_TSNR);
>> + ax_local->seq_num = 0x1f;
>> + }
>> +
>> + if (isr & ISR_TXPAGES) {
>> +
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, " TXPAGES interrupt\n");
>> +
>> + set_bit(EVENT_TX, &ax_local->flags);
>> + }
>> +
>> + if (isr & ISR_LINK) {
>> +
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, " Link change interrupt\n");
>> +
>> + ax88796c_check_media(ax_local);
>> + }
>> +
>> + if (isr & ISR_RXPKT) {
>> +
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, " RX interrupt\n");
>> +
>> + done = ax88796c_receive(ax_local->ndev);
>> + }
>> +
>> + return done;
>> +}
>> +
>> +static irqreturn_t ax88796c_interrupt(int irq, void *dev_instance)
>> +{
>> + struct net_device *ndev = dev_instance;
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + if (ndev == NULL) {
>> + pr_err("irq %d for unknown device.\n", irq);
>> + return IRQ_RETVAL(0);
>> + }
>> +
>> + disable_irq_nosync(irq);
>> +
>> + if (netif_msg_intr(ax_local))
>> + netdev_info(ndev, "Interrupt occurred\n");
>> +
>> + set_bit(EVENT_INTR, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +
>
> Only one line
>
Fixed.
>> +static void ax88796c_work(struct work_struct *work)
>> +{
>> + struct ax88796c_device *ax_local =
>> + container_of(work, struct ax88796c_device, ax_work);
>> + u8 power = 0;
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + if (test_bit(EVENT_WATCHDOG, &ax_local->flags)) {
>> +
>> + ax88796c_watchdog(ax_local);
>> +
>> + clear_bit(EVENT_WATCHDOG, &ax_local->flags);
>> + }
>> +
>> + if (test_bit(EVENT_SET_MULTI, &ax_local->flags)) {
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + ax88796c_set_hw_multicast(ax_local->ndev);
>> + clear_bit(EVENT_SET_MULTI, &ax_local->flags);
>> + }
>> +
>> + if (test_bit(EVENT_INTR, &ax_local->flags)) {
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
>> +
>> + while (1) {
>> + if (!ax88796c_process_isr(ax_local))
>> + break;
>> + }
>> +
>> + clear_bit(EVENT_INTR, &ax_local->flags);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
>> +
>> + enable_irq(ax_local->ndev->irq);
>> + }
>> +
>> + if (test_bit(EVENT_TX, &ax_local->flags)) {
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + while (skb_queue_len(&ax_local->tx_wait_q)) {
>> + if (!ax88796c_hard_xmit(ax_local))
>> + break;
>> + }
>> +
>> + clear_bit(EVENT_TX, &ax_local->flags);
>> +
>> + if (netif_queue_stopped(ax_local->ndev) &&
>> + (skb_queue_len(&ax_local->tx_wait_q) < TX_QUEUE_LOW_WATER))
>> + netif_wake_queue(ax_local->ndev);
>> + }
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + up(&ax_local->spi_lock);
>> +}
>> +
>> +static struct net_device_stats *ax88796c_get_stats(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + return &ax_local->stats;
>> +}
>> +
>> +void ax88796c_phy_init(struct ax88796c_device *ax_local)
>> +{
>> + u16 advertise = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP;
>> +
>> + /* Setup LED mode */
>> + AX_WRITE(&ax_local->ax_spi,
>> + (LCR_LED0_EN | LCR_LED0_DUPLEX | LCR_LED1_EN |
>> + LCR_LED1_100MODE), P2_LCR0);
>> + AX_WRITE(&ax_local->ax_spi,
>> + (AX_READ(&ax_local->ax_spi, P2_LCR1) & LCR_LED2_MASK) |
>> + LCR_LED2_EN | LCR_LED2_LINK, P2_LCR1);
>> +
>> + /* Enable PHY auto-polling */
>> + AX_WRITE(&ax_local->ax_spi,
>> + POOLCR_PHYID(ax_local->mii.phy_id) | POOLCR_POLL_EN |
>> + POOLCR_POLL_FLOWCTRL | POOLCR_POLL_BMCR, P2_POOLCR);
>> +
>> + ax88796c_mdio_write(ax_local->ndev,
>> + ax_local->mii.phy_id, MII_ADVERTISE, advertise);
>> +
>> + ax88796c_mdio_write(ax_local->ndev, ax_local->mii.phy_id, MII_BMCR,
>> + BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART);
>> +}
>> +
>> +static int
>> +ax88796c_open(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> + u8 power;
>> + unsigned long irq_flag = IRQF_SHARED;
>> +
>> + netif_carrier_off(ax_local->ndev);
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + ret = ax88796c_soft_reset(ax_local);
>> + if (ret < 0) {
>> + return -ENODEV;
>> + }
>> +
>> + ret = request_irq(ndev->irq, ax88796c_interrupt,
>> + irq_flag, ndev->name, ndev);
>> + if (ret) {
>> + netdev_err(ndev, "unable to get IRQ %d (errno=%d).\n",
>> + ndev->irq, ret);
>> + return -ENXIO;
>> + }
>> +
>> + ax_local->seq_num = 0x1f;
>> +
>> + ax88796c_set_mac_addr(ndev);
>> + ax88796c_set_csums(ax_local);
>> +
>> + /* Disable stuffing packet */
>> + AX_WRITE(&ax_local->ax_spi,
>> + AX_READ(&ax_local->ax_spi, P1_RXBSPCR)
>> + & ~RXBSPCR_STUF_ENABLE, P1_RXBSPCR);
>> +
>> + /* Enable RX packet process */
>> + AX_WRITE(&ax_local->ax_spi, RPPER_RXEN, P1_RPPER);
>> +
>> + AX_WRITE(&ax_local->ax_spi, AX_READ(&ax_local->ax_spi, P0_FER)
>> + | FER_RXEN | FER_TXEN | FER_BSWAP | FER_IRQ_PULL, P0_FER);
>> +
>> + ax88796c_phy_init(ax_local);
>> +
>> + netif_start_queue(ndev);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
>> +
>> + if (netif_msg_hw(ax_local)) {
>> + netdev_info(ndev,
>> + "Dump all MAC registers after initialization:\n");
>> + ax88796c_dump_regs(ax_local);
>> + ax88796c_dump_phy_regs(ax_local);
>> + }
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + spi_message_init(&ax_local->ax_spi.rx_msg);
>> +
>> + up(&ax_local->spi_lock);
>> +
>> + timer_setup(&ax_local->watchdog, ax88796c_watchdog_timer, 0);
>> + /* init_timer(&ax_local->watchdog); */
>> + /* ax_local->watchdog.function = &ax88796c_watchdog_timer; */
>> + /* ax_local->watchdog.data = (unsigned long) ndev; */
>
> I guess it's a development code.
>
Removed. This was an old timer/watchdog API.
>> + ax_local->watchdog.expires = jiffies + AX88796C_WATCHDOG_PERIOD;
>> + ax_local->w_state = chk_cable;
>> + ax_local->w_ticks = 0;
>> +
>> + add_timer(&ax_local->watchdog);
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_free_skb_queue(struct sk_buff_head *q)
>> +{
>> + struct sk_buff *skb;
>> +
>> + while (q->qlen) {
>> + skb = skb_dequeue(q);
>> + kfree_skb(skb);
>> + }
>> +}
>> +
>> +static int
>> +ax88796c_close(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u8 power;
>> +
>> + netif_stop_queue(ndev);
>> +
>> + del_timer_sync(&ax_local->watchdog);
>> +
>> + free_irq(ndev->irq, ndev);
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
>> + ax88796c_free_skb_queue(&ax_local->tx_wait_q);
>> +
>> + ax88796c_soft_reset(ax_local);
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + up(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct net_device_ops ax88796c_netdev_ops = {
>> + .ndo_open = ax88796c_open,
>> + .ndo_stop = ax88796c_close,
>> + .ndo_start_xmit = ax88796c_start_xmit,
>> + .ndo_get_stats = ax88796c_get_stats,
>> + /* .ndo_set_multicast_list = ax88796c_set_multicast, */
>
> Still need a comment.
>
Will do.
>> + .ndo_do_ioctl = ax88796c_ioctl,
>> + .ndo_set_mac_address = ax88796c_set_mac_address,
>> +};
>> +
>> +
>> +static int ax88796c_hard_reset(struct ax88796c_device *ax_local)
>> +{
>> + struct device *dev = (struct device*)&ax_local->spi->dev;
>> + struct gpio_desc *reset_gpio;
>> +
>> + /* reset info */
>> + reset_gpio = gpiod_get(dev, "reset", 0);
>> + if (IS_ERR(reset_gpio)) {
>> + dev_err(dev, "Could not get 'reset' GPIO: %ld", PTR_ERR(reset_gpio));
>> + return PTR_ERR(reset_gpio);
>> + }
>> +
>> + /* set reset */
>> + gpiod_direction_output(reset_gpio, 1);
>> + msleep(100);
>> + gpiod_direction_output(reset_gpio, 0);
>> + gpiod_put(reset_gpio);
>> + msleep(10);
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_probe(struct spi_device *spi)
>> +{
>> + struct net_device *ndev;
>> + struct ax88796c_device *ax_local;
>> + int ret;
>> + u16 temp;
>> +
>> + ndev = devm_alloc_etherdev(&spi->dev, sizeof(*ax_local));
>> + if (!ndev) {
>> + dev_err(&spi->dev, "AX88796C SPI: Could not allocate ethernet device\n");
>> + return -ENOMEM;
>> + }
>> +
>> + ax_local = to_ax88796c_device(ndev);
>> + memset(ax_local, 0, sizeof(*ax_local));
>> +
>> + dev_set_drvdata(&spi->dev, ax_local);
>> + ax_local->spi = spi;
>> + ax_local->ax_spi.spi = spi;
>> +
>> + ndev->irq = spi->irq;
>> +
>> + ax_local->msg_enable = msg_enable;
>
> One space after '='.
>
Fixed.
>> + if (ps_level > AX_PS_D2 || ps_level < 0)
>> + ax_local->ps_level = 0;
>> + else
>> + ax_local->ps_level = ps_level;
>> +
>> + ax_local->capabilities |= comp ? AX_CAP_COMP : 0;
>> +
>> + if (netif_msg_probe(ax_local)) {
>> + dev_info(&spi->dev, "AX88796C-SPI Configuration:\n");
>> + dev_info(&spi->dev, " Compression : %s\n",
>> + ax_local->capabilities & AX_CAP_COMP ? "ON" : "OFF");
>> + dev_info(&spi->dev, " Power Saving Level: %d\n",
>> + ax_local->ps_level);
>> + }
>> +
>> + ndev->netdev_ops = &ax88796c_netdev_ops;
>> + ndev->ethtool_ops = &ax88796c_ethtool_ops;
>
> No spaces before '='.
>
Fixed.
>> +
>> + ax_local->ndev = ndev;
>
> Set all priv-storing-pointers in one place, so next to dev_set_drvdata()
> unless it is chosen by probe() flow on purpose.
Done.
>> +
>> + /* Initialize MII structure */
>> + ax_local->mii.dev = ndev;
>> + ax_local->mii.mdio_read = ax88796c_mdio_read;
>> + ax_local->mii.mdio_write = ax88796c_mdio_write;
>> + ax_local->mii.phy_id_mask = 0x3f;
>> + ax_local->mii.reg_num_mask = 0x1f;
>> + ax_local->mii.phy_id = 0x10;
>> +
>> + /* ax88796c gpio reset */
>> + ax88796c_hard_reset(ax_local);
>> +
>> + /* Reset AX88796C */
>> + ret = ax88796c_soft_reset(ax_local);
>> + if (ret < 0) {
>> + return -ENODEV;
>> + }
>
> No need for {}.
>
Fixed
>> +
>> + /* Check board revision */
>> + temp = AX_READ(&ax_local->ax_spi, P2_CRIR);
>> + if ((temp & 0xF) != 0x0) {
>> + dev_err(&spi->dev, "spi read failed: %d\n", temp);
>> + return -ENODEV;
>> + }
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P0_BOR);
>> + if (temp == 0x1234) {
>> + ax_local->plat_endian = PLAT_LITTLE_ENDIAN;
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0xFFFF, P0_BOR);
>> + ax_local->plat_endian = PLAT_BIG_ENDIAN;
>> + }
>> +
>> + if (netif_msg_hw(ax_local)) {
>> + dev_info(&spi->dev,
>> + "Dump all MAC registers before initialization:\n");
>> + ax88796c_dump_regs(ax_local);
>> + ax88796c_dump_phy_regs(ax_local);
>> + }
>> +
>> + /*Reload EEPROM*/
>> + ax88796c_reload_eeprom(ax_local);
>> +
>> + ax88796c_load_mac_addr(ndev);
>> +
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&spi->dev,
>> + "irq %d, MAC addr "
>> + "%02X:%02X:%02X:%02X:%02X:%02X\n",
>> + ndev->irq,
>> + ndev->dev_addr[0], ndev->dev_addr[1],
>> + ndev->dev_addr[2], ndev->dev_addr[3],
>> + ndev->dev_addr[4], ndev->dev_addr[5]);
>> +
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + INIT_WORK(&ax_local->ax_work, ax88796c_work);
>> +
>> + ax_local->ax_work_queue =
>> + create_singlethread_workqueue("ax88796c_work");
>> +
>> + sema_init(&ax_local->spi_lock, 1);
>> +
>> + skb_queue_head_init(&ax_local->tx_wait_q);
>> +
>> + ndev->features |= NETIF_F_HW_CSUM;
>> + ax_local->checksum = AX_RX_CHECKSUM | AX_TX_CHECKSUM;
>> + ndev->hard_header_len += (TX_OVERHEAD + 4);
>> +
>> + ret = register_netdev(ndev);
>> + if (!ret) {
>> + if (netif_msg_probe(ax_local))
>> + netdev_info(ndev, "%s %s registered\n",
>> + dev_driver_string(&spi->dev),
>> + dev_name(&spi->dev));
>> + return ret;
>> + }
>
> That's unusual flow - exit on success early. Follow the kernel pattern
> of "return 0" on success and jumps to common error handling like:
>
> ret = register_netdev(ndev)
> if (ret)
> // handle error: maybe dev_err and goto
>
> if (netif_msg_probe())
> netdev_info();
>
> return 0;
>
Done.
>> +
>> + dev_err(&spi->dev, "failed to register a network device\n");
>> + destroy_workqueue(ax_local->ax_work_queue);
>> +
>> + return ret;
>> +}
>> +
>> +static int
>> +ax88796c_suspend(struct spi_device *spi, pm_message_t mesg)
>> +{
>> + struct ax88796c_device *ax_local = dev_get_drvdata(&spi->dev);
>> + struct net_device *ndev = ax_local->ndev;
>> + u8 power;
>> +
>> + if (!ndev || !netif_running(ndev))
>> + return 0;
>
> !ndev cannot happen (device should not be suspended before end of
> probe). If it can, there is a bug which you should not silently ignore.
>
Removed.
>> +
>> + netif_device_detach(ndev);
>> +
>> + netif_stop_queue(ndev);
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + power = ax88796c_check_power_and_wake(ax_local);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
>> + ax88796c_free_skb_queue(&ax_local->tx_wait_q);
>> +
>> + if (ax_local->wol) {
>> +
>> + AX_WRITE(&ax_local->ax_spi, 0, P5_WFTR);
>> +
>> + if (ax_local->wol & WFCR_LINKCH) { /* Link change */
>> +
>> + /* Disable wol power saving in link change mode */
>> + AX_WRITE(&ax_local->ax_spi,
>> + (AX_READ(&ax_local->ax_spi, P0_PSCR)
>> + & ~PSCR_WOLPS), P0_PSCR);
>> +
>> + if (netif_msg_wol(ax_local))
>> + netdev_info(ndev,
>> + "Enable link change wakeup\n");
>> +
>> + AX_WRITE(&ax_local->ax_spi, WFTR_8192MS, P5_WFTR);
>> + }
>> + if (ax_local->wol & WFCR_MAGICP) { /* Magic packet */
>> + if (netif_msg_wol(ax_local))
>> + netdev_info(ndev,
>> + "Enable magic packet wakeup\n");
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + ax_local->wol | WFCR_WAKEUP | WFCR_PMEEN, P0_WFCR);
>> + }
>> +
>> + if (power)
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + up(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +ax88796c_resume(struct spi_device *spi)
>> +{
>> + struct ax88796c_device *ax_local = dev_get_drvdata(&spi->dev);
>> + struct net_device *ndev = ax_local->ndev;
>> + u16 pme;
>> +
>> + down(&ax_local->spi_lock);
>> +
>> + /* Wakeup AX88796C first */
>> + ax88796c_check_power_and_wake(ax_local);
>> + msleep(200);
>> +
>> + pme = AX_READ(&ax_local->ax_spi, P0_WFCR);
>> + if (ax_local->wol && ~(pme & WFCR_WAITEVENT)) {
>> +
>> + if (pme & WFCR_LINKCHS) {
>> + if (netif_msg_wol(ax_local))
>> + netdev_info(ndev,
>> + "Wakeuped from link change.\n");
>> + } else if (pme & WFCR_MAGICPS) {
>> + if (netif_msg_wol(ax_local))
>> + netdev_info(ndev,
>> + "Wakeuped from magic packet.\n");
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi, WFCR_CLRWAKE, P0_WFCR);
>> + }
>> +
>> + netif_device_attach(ndev);
>> +
>> + /* Initialize all the local variables*/
>> + ax88796c_soft_reset(ax_local);
>> +
>> + ax_local->seq_num = 0x1f;
>> +
>> + ax88796c_set_mac_addr(ndev);
>> + ax88796c_set_csums(ax_local);
>> +
>> + /* Disable stuffing packet */
>> + AX_WRITE(&ax_local->ax_spi,
>> + AX_READ(&ax_local->ax_spi, P1_RXBSPCR)
>> + & ~RXBSPCR_STUF_ENABLE, P1_RXBSPCR);
>> +
>> + /* Enable RX packet process */
>> + AX_WRITE(&ax_local->ax_spi, RPPER_RXEN, P1_RPPER);
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + AX_READ(&ax_local->ax_spi, P0_FER)
>> + | FER_RXEN | FER_TXEN | FER_BSWAP, P0_FER);
>> +
>> + ax88796c_phy_init(ax_local);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
>> +
>> + if (netif_msg_hw(ax_local)) {
>> + netdev_info(ndev,
>> + "Dump all MAC registers after initialization:\n");
>> + ax88796c_dump_regs(ax_local);
>> + ax88796c_dump_phy_regs(ax_local);
>> + }
>> +
>> + ax88796c_set_power_saving(ax_local, ax_local->ps_level);
>> +
>> + netif_start_queue(ndev);
>> +
>> + up(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_remove(struct spi_device *spi)
>> +{
>> + struct ax88796c_device *ax_local = dev_get_drvdata(&spi->dev);
>> + struct net_device *ndev = ax_local->ndev;
>> +
>> + if (netif_msg_probe(ax_local))
>> + netdev_info(ndev, "removing network device %s %s\n",
>> + dev_driver_string(&spi->dev),
>> + dev_name(&spi->dev));
>> +
>> + destroy_workqueue(ax_local->ax_work_queue);
>> +
>> + unregister_netdev(ndev);
>> +
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&spi->dev, "device removed\n");
>> +
>> + return 0;
>> +}
>> +
>> +#ifdef CONFIG_USE_OF
>
> #ifdef should not be needed.
>
Removed.
>> +static const struct of_device_id ax88796c_dt_ids[] = {
>> + { .compatible = "asix,ax88796c" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ax88796c_dt_ids);
>> +#endif
>> +
>> +static const struct spi_device_id asix_id[] = {
>> + { "ax88796c", 0 },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(spi, asix_id);
>> +
>> +static struct spi_driver ax88796c_spi_driver = {
>> + .driver = {
>> + .name = DRV_NAME,
>> + .owner = THIS_MODULE,
>
> No need for owner.
>
Removed
>> +#ifdef CONFIG_USE_OF
>> + .of_match_table = of_match_ptr(ax88796c_dt_ids),
>> +#endif
>
> No need for ifdef.
>
Removed
>> + },
>> + .probe = ax88796c_probe,
>> + .remove = ax88796c_remove,
>> +// .suspend = ax88796c_suspend,
>> +// .resume = ax88796c_resume,
>
> ?
My bad. This is an old PM api that no longer exists. I commented it out
at first and forgot it. I've converted it to the new API.
>> + .id_table = asix_id,
>> +};
>> +
>> +static __init int ax88796c_spi_init(void)
>> +{
>> + pr_info("Register AX88796C SPI Ethernet Driver.\n");
>
> No, no printing of driver inits. It will bother everyone in the world.
>
> This all should be just module driver, no init/exit.
>
Removed.
>> + return spi_register_driver(&ax88796c_spi_driver);
>> +}
>> +
>> +static __exit void ax88796c_spi_exit(void)
>> +{
>> + spi_unregister_driver(&ax88796c_spi_driver);
>> +}
>> +
>> +module_init(ax88796c_spi_init);
>> +module_exit(ax88796c_spi_exit);
>> diff --git a/drivers/net/ethernet/asix/ax88796c_main.h b/drivers/net/ethernet/asix/ax88796c_main.h
>> new file mode 100644
>> index 000000000000..6c61766b1788
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_main.h
>> @@ -0,0 +1,596 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#ifndef _AX88796C_MAIN_H
>> +#define _AX88796C_MAIN_H
>> +
>> +#define pr_fmt(fmt) "ax88796c: " fmt
>> +
>> +/* INCLUDE FILE DECLARATIONS */
>> +#ifdef CONFIG_USE_OF
>
> No ifdef.
>
Removed
>> +#include <linux/of.h>
>> +#endif
>> +#include <linux/crc32.h>
>> +#include <linux/etherdevice.h>
>> +#include <linux/ethtool.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kmod.h>
>> +#include <linux/mii.h>
>> +#include <linux/module.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/sched.h>
>> +#include <linux/spi/spi.h>
>> +#include <linux/timer.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/usb.h>
>> +#include <linux/version.h>
>> +#include <linux/workqueue.h>
>
> All of these should be removed except the headers used directly in this
> header.
>
This is "private" header file included in all ax88796c_*.c files and
these are headers required in them. It seems more conveninet to have
them all listed in one place. What is the reason to do otherwise?
>> +
>> +#include <asm/dma.h>
>> +
>> +#include "ax88796c_spi.h"
>> +
>> +/* NAMING CONSTANT AND TYPE DECLARATIONS */
>> +/* These identify the driver base version and may not be removed. */
>> +#define DRV_NAME "ax88796c"
>> +#define ADP_NAME "ASIX AX88796C SPI Ethernet Adapter"
>> +#define DRV_VERSION "1.2.0"
>> +
>> +#define TX_QUEUE_HIGH_WATER 45 /* Tx queue high water mark */
>> +#define TX_QUEUE_LOW_WATER 20 /* Tx queue low water mark */
>> +
>> +#define AX88796C_WATCHDOG_PERIOD (1 * HZ)
>> +#define AX88796C_WATCHDOG_RESTART 7
>> +
>> +#define TX_OVERHEAD 8
>> +#define TX_EOP_SIZE 4
>> +
>> +#define AX_MCAST_FILTER_SIZE 8
>> +#define AX_MAX_MCAST 64
>> +#define AX_MAX_CLK 80000000
>> +#define TX_HDR_SOP_DICF 0x8000
>> +#define TX_HDR_SOP_CPHI 0x4000
>> +#define TX_HDR_SOP_INT 0x2000
>> +#define TX_HDR_SOP_MDEQ 0x1000
>> +#define TX_HDR_SOP_PKTLEN 0x07FF
>> +#define TX_HDR_SOP_SEQNUM 0xF800
>> +#define TX_HDR_SOP_PKTLENBAR 0x07FF
>> +
>> +#define TX_HDR_SEG_FS 0x8000
>> +#define TX_HDR_SEG_LS 0x4000
>> +#define TX_HDR_SEG_SEGNUM 0x3800
>> +#define TX_HDR_SEG_SEGLEN 0x0700
>> +#define TX_HDR_SEG_EOFST 0xC000
>> +#define TX_HDR_SEG_SOFST 0x3800
>> +#define TX_HDR_SEG_SEGLENBAR 0x07FF
>> +
>> +#define TX_HDR_EOP_SEQNUM 0xF800
>> +#define TX_HDR_EOP_PKTLEN 0x07FF
>> +#define TX_HDR_EOP_SEQNUMBAR 0xF800
>> +#define TX_HDR_EOP_PKTLENBAR 0x07FF
>> +
>> +/* Rx header fields mask */
>> +#define RX_HDR1_MCBC 0x8000
>> +#define RX_HDR1_STUFF_PKT 0x4000
>> +#define RX_HDR1_MII_ERR 0x2000
>> +#define RX_HDR1_CRC_ERR 0x1000
>> +#define RX_HDR1_PKT_LEN 0x07FF
>> +
>> +#define RX_HDR2_SEQ_NUM 0xF800
>> +#define RX_HDR2_PKT_LEN_BAR 0x7FFF
>> +
>> +#define RX_HDR3_PE 0x8000
>> +#define RX_HDR3_L4_TYPE_TCP 0x1000
>> +#define RX_HDR3_L4_TYPE_UDP 0x0400
>> +#define RX_HDR3_L3_ERR 0x0200
>> +#define RX_HDR3_L4_ERR 0x0100
>> +#define RX_HDR3_PRIORITY(x) ((x) << 4)
>> +#define RX_HDR3_STRIP 0x0008
>> +#define RX_HDR3_VLAN_ID 0x0007
>> +
>> +#define AX_RX_CHECKSUM 1
>> +#define AX_TX_CHECKSUM 2
>> +
>> +enum watchdog_state {
>> + chk_link = 0,
>> + chk_cable,
>> + ax_nop,
>> +};
>> +
>> +struct ax88796c_device {
>> +
>> + struct resource *addr_res; /* resources found */
>> + struct resource *addr_req; /* resources requested */
>> + struct resource *irq_res;
>> +
>> + struct spi_device *spi;
>> + struct net_device *ndev;
>> + struct mii_if_info mii;
>> + struct net_device_stats stats;
>> +
>> + struct timer_list watchdog;
>> + enum watchdog_state w_state;
>> + size_t w_ticks;
>> +
>> + struct work_struct ax_work;
>> + struct workqueue_struct *ax_work_queue;
>> + struct tasklet_struct bh;
>> +
>> + struct semaphore spi_lock;
>> +
>> + struct sk_buff_head tx_wait_q;
>> +
>> + struct axspi_data ax_spi;
>> +
>> + int msg_enable;
>> +
>> + u16 seq_num;
>> +
>> + u16 wol;
>> +
>> + u8 checksum;
>> +
>> + u8 multi_filter[AX_MCAST_FILTER_SIZE];
>> +
>> + unsigned long capabilities;
>> + #define AX_CAP_DMA 1
>> + #define AX_CAP_COMP 2
>> + #define AX_CAP_BIDIR 4
>> +
>> + u8 plat_endian;
>> + #define PLAT_LITTLE_ENDIAN 0
>> + #define PLAT_BIG_ENDIAN 1
>> +
>> + unsigned long flags;
>> + #define EVENT_INTR 1
>> + #define EVENT_TX 2
>> + #define EVENT_SET_MULTI 4
>> + #define EVENT_WATCHDOG 8
>> +
>> + u8 ps_level;
>> + #define AX_PS_D0 0
>> + #define AX_PS_D1 1
>> + #define AX_PS_D2 2
>> +
>> +
>> +};
>> +
>> +#define to_ax88796c_device(ndev) ((struct ax88796c_device *)netdev_priv(ndev))
>> +
>> +enum skb_state {
>> + illegal = 0,
>> + tx_done,
>> + rx_done,
>> + rx_err,
>> +};
>> +
>> +struct skb_data;
>> +
>> +struct skb_data {
>> + enum skb_state state;
>> + struct net_device *ndev;
>> + struct sk_buff *skb;
>> + size_t len;
>> + dma_addr_t phy_addr;
>> +};
>> +
>> +/* A88796C register definition */
>> + /* Definition of PAGE0 */
>> +#define P0_PSR (0x00)
>> + #define PSR_DEV_READY (1 << 7)
>> + #define PSR_RESET (0 << 15)
>> + #define PSR_RESET_CLR (1 << 15)
>> +#define P0_BOR (0x02)
>> +#define P0_FER (0x04)
>> + #define FER_IPALM (1 << 0)
>> + #define FER_DCRC (1 << 1)
>> + #define FER_RH3M (1 << 2)
>> + #define FER_HEADERSWAP (1 << 7)
>> + #define FER_WSWAP (1 << 8)
>> + #define FER_BSWAP (1 << 9)
>> + #define FER_INTHI (1 << 10)
>> + #define FER_INTLO (0 << 10)
>> + #define FER_IRQ_PULL (1 << 11)
>> + #define FER_RXEN (1 << 14)
>> + #define FER_TXEN (1 << 15)
>> +#define P0_ISR (0x06)
>> + #define ISR_RXPKT (1 << 0)
>> + #define ISR_MDQ (1 << 4)
>> + #define ISR_TXT (1 << 5)
>> + #define ISR_TXPAGES (1 << 6)
>> + #define ISR_TXERR (1 << 8)
>> + #define ISR_LINK (1 << 9)
>> +#define P0_IMR (0x08)
>> + #define IMR_RXPKT (1 << 0)
>> + #define IMR_MDQ (1 << 4)
>> + #define IMR_TXT (1 << 5)
>> + #define IMR_TXPAGES (1 << 6)
>> + #define IMR_TXERR (1 << 8)
>> + #define IMR_LINK (1 << 9)
>> + #define IMR_MASKALL (0xFFFF)
>> + #define IMR_DEFAULT (IMR_TXERR)
>> +#define P0_WFCR (0x0A)
>> + #define WFCR_PMEIND (1 << 0) /* PME indication */
>> + #define WFCR_PMETYPE (1 << 1) /* PME I/O type */
>> + #define WFCR_PMEPOL (1 << 2) /* PME polarity */
>> + #define WFCR_PMERST (1 << 3) /* Reset PME */
>> + #define WFCR_SLEEP (1 << 4) /* Enable sleep mode */
>> + #define WFCR_WAKEUP (1 << 5) /* Enable wakeup mode */
>> + #define WFCR_WAITEVENT (1 << 6) /* Reserved */
>> + #define WFCR_CLRWAKE (1 << 7) /* Clear wakeup */
>> + #define WFCR_LINKCH (1 << 8) /* Enable link change */
>> + #define WFCR_MAGICP (1 << 9) /* Enable magic packet */
>> + #define WFCR_WAKEF (1 << 10) /* Enable wakeup frame */
>> + #define WFCR_PMEEN (1 << 11) /* Enable PME pin */
>> + #define WFCR_LINKCHS (1 << 12) /* Link change status */
>> + #define WFCR_MAGICPS (1 << 13) /* Magic packet status */
>> + #define WFCR_WAKEFS (1 << 14) /* Wakeup frame status */
>> + #define WFCR_PMES (1 << 15) /* PME pin status */
>> +#define P0_PSCR (0x0C)
>> + #define PSCR_PS_MASK (0xFFF0)
>> + #define PSCR_PS_D0 (0)
>> + #define PSCR_PS_D1 (1 << 0)
>> + #define PSCR_PS_D2 (1 << 1)
>> + #define PSCR_FPS (1 << 3) /* Enable fiber mode PS */
>> + #define PSCR_SWPS (1 << 4) /* Enable software */
>> + /* PS control */
>> + #define PSCR_WOLPS (1 << 5) /* Enable WOL PS */
>> + #define PSCR_SWWOL (1 << 6) /* Enable software select */
>> + /* WOL PS */
>> + #define PSCR_PHYOSC (1 << 7) /* Internal PHY OSC control */
>> + #define PSCR_FOFEF (1 << 8) /* Force PHY generate FEF */
>> + #define PSCR_FOF (1 << 9) /* Force PHY in fiber mode */
>> + #define PSCR_PHYPD (1 << 10) /* PHY power down. */
>> + /* Active high */
>> + #define PSCR_PHYRST (1 << 11) /* PHY reset signal. */
>> + /* Active low */
>> + #define PSCR_PHYCSIL (1 << 12) /* PHY cable energy detect */
>> + #define PSCR_PHYCOFF (1 << 13) /* PHY cable off */
>> + #define PSCR_PHYLINK (1 << 14) /* PHY link status */
>> + #define PSCR_EEPOK (1 << 15) /* EEPROM load complete */
>> +#define P0_MACCR (0x0E)
>> + #define MACCR_RXFC_ENABLE (1 << 3)
>> + #define MACCR_RXFC_MASK 0xFFF7
>> + #define MACCR_TXFC_ENABLE (1 << 4)
>> + #define MACCR_TXFC_MASK 0xFFEF
>> + #define MACCR_PF (1 << 7)
>> + #define MACCR_PMM_BITS 8
>> + #define MACCR_PMM_MASK (0x1F00)
>> + #define MACCR_PMM_RESET (1 << 8)
>> + #define MACCR_PMM_WAIT (2 << 8)
>> + #define MACCR_PMM_READY (3 << 8)
>> + #define MACCR_PMM_D1 (4 << 8)
>> + #define MACCR_PMM_D2 (5 << 8)
>> + #define MACCR_PMM_WAKE (7 << 8)
>> + #define MACCR_PMM_D1_WAKE (8 << 8)
>> + #define MACCR_PMM_D2_WAKE (9 << 8)
>> + #define MACCR_PMM_SLEEP (10 << 8)
>> + #define MACCR_PMM_PHY_RESET (11 << 8)
>> + #define MACCR_PMM_SOFT_D1 (16 << 8)
>> + #define MACCR_PMM_SOFT_D2 (17 << 8)
>> +#define P0_TFBFCR (0x10)
>> + #define TFBFCR_SCHE_FREE_PAGE 0xE07F
>> + #define TFBFCR_FREE_PAGE_BITS 0x07
>> + #define TFBFCR_FREE_PAGE_LATCH (1 << 6)
>> + #define TFBFCR_SET_FREE_PAGE(x) ((x & 0x3F) << TFBFCR_FREE_PAGE_BITS)
>> + #define TFBFCR_TX_PAGE_SET (1 << 13)
>> + #define TFBFCR_MANU_ENTX (1 << 15)
>> + #define TX_FREEBUF_MASK 0x003F
>> + #define TX_DPTSTART 0x4000
>> +
>> +#define P0_TSNR (0x12)
>> + #define TXNR_TXB_ERR (1 << 5)
>> + #define TXNR_TXB_IDLE (1 << 6)
>> + #define TSNR_PKT_CNT(x) (((x) & 0x3F) << 8)
>> + #define TXNR_TXB_REINIT (1 << 14)
>> + #define TSNR_TXB_START (1 << 15)
>> +#define P0_RTDPR (0x14)
>> +#define P0_RXBCR1 (0x16)
>> + #define RXBCR1_RXB_DISCARD (1 << 14)
>> + #define RXBCR1_RXB_START (1 << 15)
>> +#define P0_RXBCR2 (0x18)
>> + #define RXBCR2_PKT_MASK (0xFF)
>> + #define RXBCR2_RXPC_MASK (0x7F)
>> + #define RXBCR2_RXB_READY (1 << 13)
>> + #define RXBCR2_RXB_IDLE (1 << 14)
>> + #define RXBCR2_RXB_REINIT (1 << 15)
>> +#define P0_RTWCR (0x1A)
>> + #define RTWCR_RXWC_MASK (0x3FFF)
>> + #define RTWCR_RX_LATCH (1 << 15)
>> +#define P0_RCPHR (0x1C)
>> +
>> + /* Definition of PAGE1 */
>> +#define P1_RPPER (0x22)
>> + #define RPPER_RXEN (1 << 0)
>> +#define P1_MRCR (0x28)
>> +#define P1_MDR (0x2A)
>> +#define P1_RMPR (0x2C)
>> +#define P1_TMPR (0x2E)
>> +#define P1_RXBSPCR (0x30)
>> + #define RXBSPCR_STUF_WORD_CNT(x) (((x) & 0x7000) >> 12)
>> + #define RXBSPCR_STUF_ENABLE (1 << 15)
>> +#define P1_MCR (0x32)
>> + #define MCR_SBP (1 << 8)
>> + #define MCR_SM (1 << 9)
>> + #define MCR_CRCENLAN (1 << 11)
>> + #define MCR_STP (1 << 12)
>> + /* Definition of PAGE2 */
>> +#define P2_CIR (0x42)
>> +#define P2_POOLCR (0x44)
>> + #define POOLCR_POLL_EN (1 << 0)
>> + #define POOLCR_POLL_FLOWCTRL (1 << 1)
>> + #define POOLCR_POLL_BMCR (1 << 2)
>> + #define POOLCR_PHYID(x) ((x) << 8)
>> +#define P2_PHYSR (0x46)
>> +#define P2_MDIODR (0x48)
>> +#define P2_MDIOCR (0x4A)
>> + #define MDIOCR_RADDR(x) ((x) & 0x1F)
>> + #define MDIOCR_FADDR(x) (((x) & 0x1F) << 8)
>> + #define MDIOCR_VALID (1 << 13)
>> + #define MDIOCR_READ (1 << 14)
>> + #define MDIOCR_WRITE (1 << 15)
>> +#define P2_LCR0 (0x4C)
>> + #define LCR_LED0_EN (1 << 0)
>> + #define LCR_LED0_100MODE (1 << 1)
>> + #define LCR_LED0_DUPLEX (1 << 2)
>> + #define LCR_LED0_LINK (1 << 3)
>> + #define LCR_LED0_ACT (1 << 4)
>> + #define LCR_LED0_COL (1 << 5)
>> + #define LCR_LED0_10MODE (1 << 6)
>> + #define LCR_LED0_DUPCOL (1 << 7)
>> + #define LCR_LED1_EN (1 << 8)
>> + #define LCR_LED1_100MODE (1 << 9)
>> + #define LCR_LED1_DUPLEX (1 << 10)
>> + #define LCR_LED1_LINK (1 << 11)
>> + #define LCR_LED1_ACT (1 << 12)
>> + #define LCR_LED1_COL (1 << 13)
>> + #define LCR_LED1_10MODE (1 << 14)
>> + #define LCR_LED1_DUPCOL (1 << 15)
>> +#define P2_LCR1 (0x4E)
>> + #define LCR_LED2_MASK (0xFF00)
>> + #define LCR_LED2_EN (1 << 0)
>> + #define LCR_LED2_100MODE (1 << 1)
>> + #define LCR_LED2_DUPLEX (1 << 2)
>> + #define LCR_LED2_LINK (1 << 3)
>> + #define LCR_LED2_ACT (1 << 4)
>> + #define LCR_LED2_COL (1 << 5)
>> + #define LCR_LED2_10MODE (1 << 6)
>> + #define LCR_LED2_DUPCOL (1 << 7)
>> +#define P2_IPGCR (0x50)
>> +#define P2_CRIR (0x52)
>> +#define P2_FLHWCR (0x54)
>> +#define P2_RXCR (0x56)
>> + #define RXCR_PRO (1 << 0)
>> + #define RXCR_AMALL (1 << 1)
>> + #define RXCR_SEP (1 << 2)
>> + #define RXCR_AB (1 << 3)
>> + #define RXCR_AM (1 << 4)
>> + #define RXCR_AP (1 << 5)
>> + #define RXCR_ARP (1 << 6)
>> +#define P2_JLCR (0x58)
>> +#define P2_MPLR (0x5C)
>> +
>> + /* Definition of PAGE3 */
>> +#define P3_MACASR0 (0x62)
>> + #define P3_MACASR(x) (P3_MACASR0 + 2*x)
>> + #define MACASR_LOWBYTE_MASK 0x00FF
>> + #define MACASR_HIGH_BITS 0x08
>> +#define P3_MACASR1 (0x64)
>> +#define P3_MACASR2 (0x66)
>> +#define P3_MFAR01 (0x68)
>> +#define P3_MFAR_BASE (0x68)
>> + #define P3_MFAR(x) (P3_MFAR_BASE + 2*x)
>> +
>> +#define P3_MFAR23 (0x6A)
>> +#define P3_MFAR45 (0x6C)
>> +#define P3_MFAR67 (0x6E)
>> +#define P3_VID0FR (0x70)
>> +#define P3_VID1FR (0x72)
>> +#define P3_EECSR (0x74)
>> +#define P3_EEDR (0x76)
>> +#define P3_EECR (0x78)
>> + #define EECR_ADDR_MASK (0x00FF)
>> + #define EECR_READ_ACT (1 << 8)
>> + #define EECR_WRITE_ACT (1 << 9)
>> + #define EECR_WRITE_DISABLE (1 << 10)
>> + #define EECR_WRITE_ENABLE (1 << 11)
>> + #define EECR_EE_READY (1 << 13)
>> + #define EECR_RELOAD (1 << 14)
>> + #define EECR_RESET (1 << 15)
>> +#define P3_TPCR (0x7A)
>> + #define TPCR_PATT_MASK (0xFF)
>> + #define TPCR_RAND_PKT_EN (1 << 14)
>> + #define TPCR_FIXED_PKT_EN (1 << 15)
>> +#define P3_TPLR (0x7C)
>> + /* Definition of PAGE4 */
>> +#define P4_SPICR (0x8A)
>> + #define SPICR_RCEN (1 << 0)
>> + #define SPICR_QCEN (1 << 1)
>> + #define SPICR_RBRE (1 << 3)
>> + #define SPICR_PMM (1 << 4)
>> + #define SPICR_LOOPBACK (1 << 8)
>> + #define SPICR_CORE_RES_CLR (1 << 10)
>> + #define SPICR_SPI_RES_CLR (1 << 11)
>> +#define P4_SPIISMR (0x8C)
>> +
>> +#define P4_COERCR0 (0x92)
>> + #define COERCR0_RXIPCE (1 << 0)
>> + #define COERCR0_RXIPVE (1 << 1)
>> + #define COERCR0_RXV6PE (1 << 2)
>> + #define COERCR0_RXTCPE (1 << 3)
>> + #define COERCR0_RXUDPE (1 << 4)
>> + #define COERCR0_RXICMP (1 << 5)
>> + #define COERCR0_RXIGMP (1 << 6)
>> + #define COERCR0_RXICV6 (1 << 7)
>> +
>> + #define COERCR0_RXTCPV6 (1 << 8)
>> + #define COERCR0_RXUDPV6 (1 << 9)
>> + #define COERCR0_RXICMV6 (1 << 10)
>> + #define COERCR0_RXIGMV6 (1 << 11)
>> + #define COERCR0_RXICV6V6 (1 << 12)
>> +
>> + #define COERCR0_DEFAULT (COERCR0_RXIPCE | COERCR0_RXV6PE | \
>> + COERCR0_RXTCPE | COERCR0_RXUDPE | \
>> + COERCR0_RXTCPV6 | COERCR0_RXUDPV6)
>> +#define P4_COERCR1 (0x94)
>> + #define COERCR1_IPCEDP (1 << 0)
>> + #define COERCR1_IPVEDP (1 << 1)
>> + #define COERCR1_V6VEDP (1 << 2)
>> + #define COERCR1_TCPEDP (1 << 3)
>> + #define COERCR1_UDPEDP (1 << 4)
>> + #define COERCR1_ICMPDP (1 << 5)
>> + #define COERCR1_IGMPDP (1 << 6)
>> + #define COERCR1_ICV6DP (1 << 7)
>> + #define COERCR1_RX64TE (1 << 8)
>> + #define COERCR1_RXPPPE (1 << 9)
>> + #define COERCR1_TCP6DP (1 << 10)
>> + #define COERCR1_UDP6DP (1 << 11)
>> + #define COERCR1_IC6DP (1 << 12)
>> + #define COERCR1_IG6DP (1 << 13)
>> + #define COERCR1_ICV66DP (1 << 14)
>> + #define COERCR1_RPCE (1 << 15)
>> +
>> + #define COERCR1_DEFAULT (COERCR1_RXPPPE)
>> +#define P4_COETCR0 (0x96)
>> + #define COETCR0_TXIP (1 << 0)
>> + #define COETCR0_TXTCP (1 << 1)
>> + #define COETCR0_TXUDP (1 << 2)
>> + #define COETCR0_TXICMP (1 << 3)
>> + #define COETCR0_TXIGMP (1 << 4)
>> + #define COETCR0_TXICV6 (1 << 5)
>> + #define COETCR0_TXTCPV6 (1 << 8)
>> + #define COETCR0_TXUDPV6 (1 << 9)
>> + #define COETCR0_TXICMV6 (1 << 10)
>> + #define COETCR0_TXIGMV6 (1 << 11)
>> + #define COETCR0_TXICV6V6 (1 << 12)
>> +
>> + #define COETCR0_DEFAULT (COETCR0_TXIP | COETCR0_TXTCP | \
>> + COETCR0_TXUDP | COETCR0_TXTCPV6 | \
>> + COETCR0_TXUDPV6)
>> +#define P4_COETCR1 (0x98)
>> + #define COETCR1_TX64TE (1 << 0)
>> + #define COETCR1_TXPPPE (1 << 1)
>> +
>> +#define P4_COECEDR (0x9A)
>> +#define P4_L2CECR (0x9C)
>> +
>> + /* Definition of PAGE5 */
>> +#define P5_WFTR (0xA2)
>> + #define WFTR_2MS (0x01)
>> + #define WFTR_4MS (0x02)
>> + #define WFTR_8MS (0x03)
>> + #define WFTR_16MS (0x04)
>> + #define WFTR_32MS (0x05)
>> + #define WFTR_64MS (0x06)
>> + #define WFTR_128MS (0x07)
>> + #define WFTR_256MS (0x08)
>> + #define WFTR_512MS (0x09)
>> + #define WFTR_1024MS (0x0A)
>> + #define WFTR_2048MS (0x0B)
>> + #define WFTR_4096MS (0x0C)
>> + #define WFTR_8192MS (0x0D)
>> + #define WFTR_16384MS (0x0E)
>> + #define WFTR_32768MS (0x0F)
>> +#define P5_WFCCR (0xA4)
>> +#define P5_WFCR03 (0xA6)
>> + #define WFCR03_F0_EN (1 << 0)
>> + #define WFCR03_F1_EN (1 << 4)
>> + #define WFCR03_F2_EN (1 << 8)
>> + #define WFCR03_F3_EN (1 << 12)
>> +#define P5_WFCR47 (0xA8)
>> + #define WFCR47_F4_EN (1 << 0)
>> + #define WFCR47_F5_EN (1 << 4)
>> + #define WFCR47_F6_EN (1 << 8)
>> + #define WFCR47_F7_EN (1 << 12)
>> +#define P5_WF0BMR0 (0xAA)
>> +#define P5_WF0BMR1 (0xAC)
>> +#define P5_WF0CR (0xAE)
>> +#define P5_WF0OBR (0xB0)
>> +#define P5_WF1BMR0 (0xB2)
>> +#define P5_WF1BMR1 (0xB4)
>> +#define P5_WF1CR (0xB6)
>> +#define P5_WF1OBR (0xB8)
>> +#define P5_WF2BMR0 (0xBA)
>> +#define P5_WF2BMR1 (0xBC)
>> +
>> + /* Definition of PAGE6 */
>> +#define P6_WF2CR (0xC2)
>> +#define P6_WF2OBR (0xC4)
>> +#define P6_WF3BMR0 (0xC6)
>> +#define P6_WF3BMR1 (0xC8)
>> +#define P6_WF3CR (0xCA)
>> +#define P6_WF3OBR (0xCC)
>> +#define P6_WF4BMR0 (0xCE)
>> +#define P6_WF4BMR1 (0xD0)
>> +#define P6_WF4CR (0xD2)
>> +#define P6_WF4OBR (0xD4)
>> +#define P6_WF5BMR0 (0xD6)
>> +#define P6_WF5BMR1 (0xD8)
>> +#define P6_WF5CR (0xDA)
>> +#define P6_WF5OBR (0xDC)
>> +
>> +/* Definition of PAGE7 */
>> +#define P7_WF6BMR0 (0xE2)
>> +#define P7_WF6BMR1 (0xE4)
>> +#define P7_WF6CR (0xE6)
>> +#define P7_WF6OBR (0xE8)
>> +#define P7_WF7BMR0 (0xEA)
>> +#define P7_WF7BMR1 (0xEC)
>> +#define P7_WF7CR (0xEE)
>> +#define P7_WF7OBR (0xF0)
>> +#define P7_WFR01 (0xF2)
>> +#define P7_WFR23 (0xF4)
>> +#define P7_WFR45 (0xF6)
>> +#define P7_WFR67 (0xF8)
>> +#define P7_WFPC0 (0xFA)
>> +#define P7_WFPC1 (0xFC)
>> +
>> +
>> +/* Tx headers structure */
>> +struct tx_sop_header {
>> + /* bit 15-11: flags, bit 10-0: packet length */
>> + u16 flags_len;
>> + /* bit 15-11: sequence number, bit 11-0: packet length bar */
>> + u16 seq_lenbar;
>> +} __packed;
>> +
>> +struct tx_segment_header {
>> + /* bit 15-14: flags, bit 13-11: segment number */
>> + /* bit 10-0: segment length */
>> + u16 flags_seqnum_seglen;
>> + /* bit 15-14: end offset, bit 13-11: start offset */
>> + /* bit 10-0: segment length bar */
>> + u16 eo_so_seglenbar;
>> +} __packed;
>> +
>> +struct tx_eop_header {
>> + /* bit 15-11: sequence number, bit 10-0: packet length */
>> + u16 seq_len;
>> + /* bit 15-11: sequence number bar, bit 10-0: packet length bar */
>> + u16 seqbar_lenbar;
>> +} __packed;
>> +
>> +struct tx_pkt_info {
>> + struct tx_sop_header sop;
>> + struct tx_segment_header seg;
>> + struct tx_eop_header eop;
>> + u16 pkt_len;
>> + u16 seq_num;
>> +} __packed;
>> +
>> +/* Rx headers structure */
>> +struct rx_header {
>> + u16 flags_len;
>> + u16 seq_lenbar;
>> + u16 flags;
>> +} __packed;
>> +
>> +#endif /* #ifndef _AX88796C_MAIN_H */
>> diff --git a/drivers/net/ethernet/asix/ax88796c_spi.c b/drivers/net/ethernet/asix/ax88796c_spi.c
>> new file mode 100644
>> index 000000000000..5304eb33aad2
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_spi.c
>> @@ -0,0 +1,103 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#include "ax88796c_main.h"
>> +#include "ax88796c_spi.h"
>> +
>> +/* driver bus management functions */
>> +void axspi_wakeup(struct axspi_data *ax_spi)
>> +{
>> + u8 tx_buf;
>> + int ret;
>> +
>> + tx_buf = AX_SPICMD_EXIT_PWD; /* OP */
>> + ret = spi_write(ax_spi->spi, &tx_buf, 1);
>> + if (ret)
>> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
>> +}
>> +
>> +void axspi_read_status(struct axspi_data *ax_spi, struct spi_status *status)
>> +{
>> + u8 tx_buf;
>> + int ret;
>> +
>> + /* OP */
>> + tx_buf = AX_SPICMD_READ_STATUS;
>> + ret = spi_write_then_read(ax_spi->spi, &tx_buf, 1, (u8 *)&status, 3);
>> + if (ret)
>> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
>> + else
>> + le16_to_cpus(&status->isr);
>> +}
>> +
>> +int axspi_read_rxq(struct axspi_data *ax_spi, void *data, int len)
>> +{
>> + struct spi_transfer *xfer = ax_spi->spi_rx_xfer;
>> + int ret;
>> +
>> + memcpy(ax_spi->cmd_buf, rx_cmd_buf, 5);
>> +
>> + xfer->tx_buf = ax_spi->cmd_buf;
>> + xfer->rx_buf = NULL;
>> + xfer->len = ax_spi->comp ? 2 : 5;
>> + xfer->bits_per_word = 8;
>> + spi_message_add_tail(xfer, &ax_spi->rx_msg);
>> +
>> + xfer++;
>> + xfer->rx_buf = data;
>> + xfer->tx_buf = NULL;
>> + xfer->len = len;
>> + xfer->bits_per_word = 8;
>> + spi_message_add_tail(xfer, &ax_spi->rx_msg);
>> + ret = spi_sync(ax_spi->spi, &ax_spi->rx_msg);
>> + if (ret)
>> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
>> +
>> + return ret;
>> +}
>> +
>> +int axspi_write_txq(struct axspi_data *ax_spi, void *data, int len)
>> +{
>> + return spi_write(ax_spi->spi, data, len);
>> +}
>> +
>> +u16 axspi_read_reg(struct axspi_data *ax_spi, u8 reg)
>> +{
>> + u8 tx_buf[4];
>> + u16 rx_buf = 0;
>> + int ret;
>> + int len = ax_spi->comp ? 3 : 4;
>> +
>> + tx_buf[0] = 0x03; /* OP code read register */
>> + tx_buf[1] = reg; /* register address */
>> + tx_buf[2] = 0xFF; /* dumy cycle */
>> + tx_buf[3] = 0xFF; /* dumy cycle */
>> + ret = spi_write_then_read(ax_spi->spi, tx_buf, len, (u8 *)&rx_buf, 2);
>> + if (ret)
>> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
>> + else
>> + le16_to_cpus(&rx_buf);
>> +
>> + return rx_buf;
>> +}
>> +
>> +void axspi_write_reg(struct axspi_data *ax_spi, u8 reg, u16 value)
>> +{
>> + u8 tx_buf[4];
>> + int ret;
>> +
>> + tx_buf[0] = AX_SPICMD_WRITE_REG; /* OP code read register */
>> + tx_buf[1] = reg; /* register address */
>> + tx_buf[2] = value;
>> + tx_buf[3] = value >> 8;
>> +
>> + ret = spi_write(ax_spi->spi, tx_buf, 4);
>> + if (ret)
>> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
>> +
>
> Run the checkpatch string and fix almost all issues (except ones you
> disagree).
--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
Download attachment "signature.asc" of type "application/pgp-signature" (484 bytes)
Powered by blists - more mailing lists