netdev - [net-next PATCH] net: dsa: rtl8366: Properly clear member config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200905103233.16922-1-linus.walleij@linaro.org>
Date:   Sat,  5 Sep 2020 12:32:33 +0200
From:   Linus Walleij <linus.walleij@...aro.org>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, "David S . Miller" <davem@...emloft.net>
Cc:     Linus Walleij <linus.walleij@...aro.org>
Subject: [net-next PATCH] net: dsa: rtl8366: Properly clear member config

When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.

Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.

Reported-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/net/dsa/rtl8366.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 2dcde7a91721..bd3c947976ce 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -471,13 +471,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 				return ret;
 
 			if (vid == vlanmc.vid) {
-				/* clear VLAN member configurations */
-				vlanmc.vid = 0;
-				vlanmc.priority = 0;
-				vlanmc.member = 0;
-				vlanmc.untag = 0;
-				vlanmc.fid = 0;
-
+				/* Remove this port from the VLAN */
+				vlanmc.member &= ~BIT(port);
+				vlanmc.untag &= ~BIT(port);
+				/*
+				 * If no ports are members of this VLAN
+				 * anymore then clear the whole member
+				 * config so it can be reused.
+				 */
+				if (!vlanmc.member && vlanmc.untag) {
+					vlanmc.vid = 0;
+					vlanmc.priority = 0;
+					vlanmc.fid = 0;
+				}
 				ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
 				if (ret) {
 					dev_err(smi->dev,
-- 
2.26.2