| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200910093835.24317-5-yangbo.lu@nxp.com>
Date: Thu, 10 Sep 2020 17:38:34 +0800
From: Yangbo Lu <yangbo.lu@....com>
To: netdev@...r.kernel.org
Cc: Yangbo Lu <yangbo.lu@....com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Ioana Ciornei <ioana.ciornei@....com>,
Ioana Radulescu <ruxandra.radulescu@....com>,
Richard Cochran <richardcochran@...il.com>
Subject: [PATCH 4/5] dpaa2-eth: utilize skb->cb[0] for hardware timestamping
This patch is a preparation for next hardware one-step timestamping
support. For DPAA2, the one step timestamping configuration on
hardware registers has to be done when there is no one-step timestamping
packet in flight. So we will have to use workqueue and skb queue
for such packets transmitting, to make sure waiting the last packet has
already been sent on hardware, and starting to transmit the current one.
So the tx timestamping flag in private data may not reflect the actual
request for the one-step timestamping packets of skb queue. This also
affects skb headroom allocation. Let's use skb->cb[0] to mark the
timestamping request for each skb.
Signed-off-by: Yangbo Lu <yangbo.lu@....com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 25 +++++++++++++++---------
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 13 ++++++------
2 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index a8c311fb..2514543 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -11,7 +11,6 @@
#include <linux/msi.h>
#include <linux/kthread.h>
#include <linux/iommu.h>
-#include <linux/net_tstamp.h>
#include <linux/fsl/mc.h>
#include <linux/bpf.h>
#include <linux/bpf_trace.h>
@@ -780,7 +779,7 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv,
struct dpaa2_eth_swa *swa;
dma_addr_t addr;
- buffer_start = skb->data - dpaa2_eth_needed_headroom(priv, skb);
+ buffer_start = skb->data - dpaa2_eth_needed_headroom(skb);
/* If there's enough room to align the FD address, do it.
* It will help hardware optimize accesses.
@@ -894,7 +893,7 @@ static void dpaa2_eth_free_tx_fd(const struct dpaa2_eth_priv *priv,
}
/* Get the timestamp value */
- if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
+ if (skb->cb[0] == TX_TSTAMP) {
struct skb_shared_hwtstamps shhwtstamps;
__le64 *ts = dpaa2_get_ts(buffer_start, true);
u64 ns;
@@ -938,10 +937,17 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)
int err, i;
void *swa;
+ /* Utilize skb->cb[0] for timestamping request per skb */
+ skb->cb[0] = 0;
+
+ if (priv->tx_tstamp_type == HWTSTAMP_TX_ON &&
+ skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+ skb->cb[0] = TX_TSTAMP;
+
percpu_stats = this_cpu_ptr(priv->percpu_stats);
percpu_extras = this_cpu_ptr(priv->percpu_extras);
- needed_headroom = dpaa2_eth_needed_headroom(priv, skb);
+ needed_headroom = dpaa2_eth_needed_headroom(skb);
/* We'll be holding a back-reference to the skb until Tx Confirmation;
* we don't want that overwritten by a concurrent Tx with a cloned skb.
@@ -975,7 +981,7 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)
goto err_build_fd;
}
- if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+ if (skb->cb[0] == TX_TSTAMP)
dpaa2_eth_enable_tx_tstamp(&fd, swa);
/* Tracing point */
@@ -1899,10 +1905,8 @@ static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
switch (config.tx_type) {
case HWTSTAMP_TX_OFF:
- priv->tx_tstamp = false;
- break;
case HWTSTAMP_TX_ON:
- priv->tx_tstamp = true;
+ priv->tx_tstamp_type = config.tx_type;
break;
default:
return -ERANGE;
@@ -2107,7 +2111,7 @@ static int dpaa2_eth_xdp_create_fd(struct net_device *net_dev,
/* We require a minimum headroom to be able to transmit the frame.
* Otherwise return an error and let the original net_device handle it
*/
- needed_headroom = dpaa2_eth_needed_headroom(priv, NULL);
+ needed_headroom = dpaa2_eth_needed_headroom(NULL);
if (xdpf->headroom < needed_headroom)
return -EINVAL;
@@ -3963,6 +3967,9 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev)
priv->iommu_domain = iommu_get_domain_for_dev(dev);
+ priv->tx_tstamp_type = HWTSTAMP_TX_OFF;
+ priv->rx_tstamp = false;
+
/* Obtain a MC portal */
err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
&priv->mc_io);
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
index 7f3c41d..57e6e6e 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
@@ -10,6 +10,7 @@
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/fsl/mc.h>
+#include <linux/net_tstamp.h>
#include <soc/fsl/dpaa2-io.h>
#include <soc/fsl/dpaa2-fd.h>
@@ -433,8 +434,8 @@ struct dpaa2_eth_priv {
u16 bpid;
struct iommu_domain *iommu_domain;
- bool tx_tstamp; /* Tx timestamping enabled */
- bool rx_tstamp; /* Rx timestamping enabled */
+ enum hwtstamp_tx_types tx_tstamp_type; /* Tx timestamping type */
+ bool rx_tstamp; /* Rx timestamping enabled */
u16 tx_qdid;
struct fsl_mc_io *mc_io;
@@ -475,6 +476,8 @@ struct dpaa2_eth_priv {
struct dpaa2_mac *mac;
};
+#define TX_TSTAMP 0x1
+
#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \
| RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \
| RXH_L4_B_2_3)
@@ -560,9 +563,7 @@ static inline bool dpaa2_eth_rx_pause_enabled(u64 link_options)
return !!(link_options & DPNI_LINK_OPT_PAUSE);
}
-static inline
-unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,
- struct sk_buff *skb)
+static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb)
{
unsigned int headroom = DPAA2_ETH_SWA_SIZE;
@@ -579,7 +580,7 @@ unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,
return 0;
/* If we have Tx timestamping, need 128B hardware annotation */
- if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+ if (skb->cb[0] == TX_TSTAMP)
headroom += DPAA2_ETH_TX_HWA_SIZE;
return headroom;
--
2.7.4
Powered by blists - more mailing lists