| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200910093835.24317-2-yangbo.lu@nxp.com>
Date: Thu, 10 Sep 2020 17:38:31 +0800
From: Yangbo Lu <yangbo.lu@....com>
To: netdev@...r.kernel.org
Cc: Yangbo Lu <yangbo.lu@....com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Ioana Ciornei <ioana.ciornei@....com>,
Ioana Radulescu <ruxandra.radulescu@....com>,
Richard Cochran <richardcochran@...il.com>
Subject: [PATCH 1/5] dpaa2-eth: add APIs of 1588 single step timestamping
This patch is to add APIs of 1588 single step timestamping.
- dpni_set_single_step_cfg
- dpni_get_single_step_cfg
Signed-off-by: Yangbo Lu <yangbo.lu@....com>
---
drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h | 21 +++++++
drivers/net/ethernet/freescale/dpaa2/dpni.c | 73 +++++++++++++++++++++++++
drivers/net/ethernet/freescale/dpaa2/dpni.h | 31 +++++++++++
3 files changed, 125 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
index 593e381..1222a4e 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/* Copyright 2013-2016 Freescale Semiconductor Inc.
* Copyright 2016 NXP
+ * Copyright 2020 NXP
*/
#ifndef _FSL_DPNI_CMD_H
#define _FSL_DPNI_CMD_H
@@ -90,6 +91,9 @@
#define DPNI_CMDID_SET_RX_HASH_DIST DPNI_CMD(0x274)
#define DPNI_CMDID_GET_LINK_CFG DPNI_CMD(0x278)
+#define DPNI_CMDID_SET_SINGLE_STEP_CFG DPNI_CMD(0x279)
+#define DPNI_CMDID_GET_SINGLE_STEP_CFG DPNI_CMD(0x27a)
+
/* Macros for accessing command fields smaller than 1byte */
#define DPNI_MASK(field) \
GENMASK(DPNI_##field##_SHIFT + DPNI_##field##_SIZE - 1, \
@@ -639,4 +643,21 @@ struct dpni_cmd_set_tx_shaping {
u8 coupled;
};
+#define DPNI_PTP_ENABLE_SHIFT 0
+#define DPNI_PTP_ENABLE_SIZE 1
+#define DPNI_PTP_CH_UPDATE_SHIFT 1
+#define DPNI_PTP_CH_UPDATE_SIZE 1
+
+struct dpni_cmd_single_step_cfg {
+ __le16 flags;
+ __le16 offset;
+ __le32 peer_delay;
+};
+
+struct dpni_rsp_single_step_cfg {
+ __le16 flags;
+ __le16 offset;
+ __le32 peer_delay;
+};
+
#endif /* _FSL_DPNI_CMD_H */
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni.c b/drivers/net/ethernet/freescale/dpaa2/dpni.c
index 68ed4c4..6a36d47 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpni.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2013-2016 Freescale Semiconductor Inc.
* Copyright 2016 NXP
+ * Copyright 2020 NXP
*/
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -1999,3 +2000,75 @@ int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
/* send command to mc*/
return mc_send_command(mc_io, &cmd);
}
+
+/**
+ * dpni_get_single_step_cfg() - return current configuration for
+ * single step PTP
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @ptp_cfg: ptp single step configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ *
+ */
+int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpni_single_step_cfg *ptp_cfg)
+{
+ struct dpni_rsp_single_step_cfg *rsp_params;
+ struct fsl_mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_SINGLE_STEP_CFG,
+ cmd_flags, token);
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* read command response */
+ rsp_params = (struct dpni_rsp_single_step_cfg *)cmd.params;
+ ptp_cfg->offset = le16_to_cpu(rsp_params->offset);
+ ptp_cfg->en = dpni_get_field(rsp_params->flags, PTP_ENABLE);
+ ptp_cfg->ch_update = dpni_get_field(rsp_params->flags, PTP_CH_UPDATE);
+ ptp_cfg->peer_delay = le32_to_cpu(rsp_params->peer_delay);
+
+ return err;
+}
+
+/**
+ * dpni_set_single_step_cfg() - enable/disable and configure single step PTP
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPNI object
+ * @ptp_cfg: ptp single step configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ *
+ * The function has effect only when dpni object is connected to a dpmac
+ * object. If the dpni is not connected to a dpmac the configuration will
+ * be stored inside and applied when connection is made.
+ */
+int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpni_single_step_cfg *ptp_cfg)
+{
+ struct dpni_cmd_single_step_cfg *cmd_params;
+ struct fsl_mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_SINGLE_STEP_CFG,
+ cmd_flags, token);
+ cmd_params = (struct dpni_cmd_single_step_cfg *)cmd.params;
+ cmd_params->offset = cpu_to_le16(ptp_cfg->offset);
+ cmd_params->peer_delay = cpu_to_le32(ptp_cfg->peer_delay);
+ dpni_set_field(cmd_params->flags, PTP_ENABLE, !!ptp_cfg->en);
+ dpni_set_field(cmd_params->flags, PTP_CH_UPDATE, !!ptp_cfg->ch_update);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni.h b/drivers/net/ethernet/freescale/dpaa2/dpni.h
index 3938799..74456a3 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpni.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/* Copyright 2013-2016 Freescale Semiconductor Inc.
* Copyright 2016 NXP
+ * Copyright 2020 NXP
*/
#ifndef __FSL_DPNI_H
#define __FSL_DPNI_H
@@ -1079,4 +1080,34 @@ int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,
const struct dpni_tx_shaping_cfg *tx_er_shaper,
int coupled);
+/**
+ * struct dpni_single_step_cfg - configure single step PTP (IEEE 1588)
+ * @en: enable single step PTP. When enabled the PTPv1 functionality
+ * will not work. If the field is zero, offset and ch_update
+ * parameters will be ignored
+ * @offset: start offset from the beginning of the frame where
+ * timestamp field is found. The offset must respect all MAC
+ * headers, VLAN tags and other protocol headers
+ * @ch_update: when set UDP checksum will be updated inside packet
+ * @peer_delay: For peer-to-peer transparent clocks add this value to the
+ * correction field in addition to the transient time update.
+ * The value expresses nanoseconds.
+ */
+struct dpni_single_step_cfg {
+ u8 en;
+ u8 ch_update;
+ u16 offset;
+ u32 peer_delay;
+};
+
+int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpni_single_step_cfg *ptp_cfg);
+
+int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpni_single_step_cfg *ptp_cfg);
+
#endif /* __FSL_DPNI_H */
--
2.7.4
Powered by blists - more mailing lists