| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201116144534.GB1611573@bogus>
Date: Mon, 16 Nov 2020 08:45:34 -0600
From: Rob Herring <robh@...nel.org>
To: Christian Eggers <ceggers@...i.de>
Cc: Vladimir Oltean <olteanv@...il.com>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Richard Cochran <richardcochran@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Kurt Kanzenbach <kurt.kanzenbach@...utronix.de>,
George McCollister <george.mccollister@...il.com>,
Marek Vasut <marex@...x.de>,
Helmut Grohne <helmut.grohne@...enta.de>,
Paul Barker <pbarker@...sulko.com>,
Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>,
Tristram Ha <Tristram.Ha@...rochip.com>,
Woojung Huh <woojung.huh@...rochip.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v2 01/11] dt-bindings: net: dsa: convert ksz
bindings document to yaml
On Thu, Nov 12, 2020 at 04:35:27PM +0100, Christian Eggers wrote:
> Convert the bindings document for Microchip KSZ Series Ethernet switches
> from txt to yaml.
>
> Signed-off-by: Christian Eggers <ceggers@...i.de>
> ---
> .../devicetree/bindings/net/dsa/ksz.txt | 125 ---------------
> .../bindings/net/dsa/microchip,ksz.yaml | 150 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 151 insertions(+), 126 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt
> create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
[...]
> diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> new file mode 100644
> index 000000000000..431ca5c498a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> @@ -0,0 +1,150 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip KSZ Series Ethernet switches
> +
> +allOf:
> + - $ref: dsa.yaml#
> +
> +maintainers:
> + - Marek Vasut <marex@...x.de>
> + - Woojung Huh <Woojung.Huh@...rochip.com>
> +
> +properties:
> + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
> + # required and optional properties.
> + compatible:
> + enum:
> + - "microchip,ksz8765"
> + - "microchip,ksz8794"
> + - "microchip,ksz8795"
> + - "microchip,ksz9477"
> + - "microchip,ksz9897"
> + - "microchip,ksz9896"
> + - "microchip,ksz9567"
> + - "microchip,ksz8565"
> + - "microchip,ksz9893"
> + - "microchip,ksz9563"
> + - "microchip,ksz8563"
Don't need quotes.
> +
> + reset-gpios:
> + description:
> + Should be a gpio specifier for a reset line.
> + maxItems: 1
> +
> + microchip,synclko-125:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
> + eth0 {
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> +
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pinctrl-0 = <&pinctrl_spi_ksz>;
> + cs-gpios = <&pioC 25 0>;
> + id = <1>;
> +
> + ksz9477: switch@0 {
> + compatible = "microchip,ksz9477";
> + reg = <0>;
> + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> +
> + spi-max-frequency = <44000000>;
> + spi-cpha;
> + spi-cpol;
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + label = "lan1";
> + };
> + port@1 {
> + reg = <1>;
> + label = "lan2";
> + };
> + port@2 {
> + reg = <2>;
> + label = "lan3";
> + };
> + port@3 {
> + reg = <3>;
> + label = "lan4";
> + };
> + port@4 {
> + reg = <4>;
> + label = "lan5";
> + };
> + port@5 {
> + reg = <5>;
> + label = "cpu";
> + ethernet = <ð0>;
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> + };
> + };
> +
> + ksz8565: switch@1 {
> + compatible = "microchip,ksz8565";
> + reg = <1>;
> +
> + spi-max-frequency = <44000000>;
> + spi-cpha;
> + spi-cpol;
> +
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + label = "lan1";
> + };
> + port@1 {
> + reg = <1>;
> + label = "lan2";
> + };
> + port@2 {
> + reg = <2>;
> + label = "lan3";
> + };
> + port@3 {
> + reg = <3>;
> + label = "lan4";
> + };
> + port@6 {
> + reg = <6>;
> + label = "cpu";
> + ethernet = <ð0>;
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1e7d1d71c125..3d173fcbf119 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11518,7 +11518,7 @@ M: Woojung Huh <woojung.huh@...rochip.com>
> M: Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>
> L: netdev@...r.kernel.org
> S: Maintained
> -F: Documentation/devicetree/bindings/net/dsa/ksz.txt
> +F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> F: drivers/net/dsa/microchip/*
> F: include/linux/platform_data/microchip-ksz.h
> F: net/dsa/tag_ksz.c
> --
> Christian Eggers
> Embedded software developer
>
> Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
> Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
> Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
> Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
> Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
>
Powered by blists - more mailing lists