| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7522726.5jB9HK481P@n95hx1g2>
Date: Tue, 17 Nov 2020 08:55:10 +0100
From: Christian Eggers <ceggers@...i.de>
To: Rob Herring <robh@...nel.org>
CC: Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Tristram Ha <Tristram.Ha@...rochip.com>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
"Vivien Didelot" <vivien.didelot@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
"Woojung Huh" <woojung.huh@...rochip.com>,
Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>,
<netdev@...r.kernel.org>, "David S . Miller" <davem@...emloft.net>,
Richard Cochran <richardcochran@...il.com>,
George McCollister <george.mccollister@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Helmut Grohne <helmut.grohne@...enta.de>,
Marek Vasut <marex@...x.de>,
Kurt Kanzenbach <kurt.kanzenbach@...utronix.de>,
Paul Barker <pbarker@...sulko.com>,
Vladimir Oltean <olteanv@...il.com>
Subject: Re: [PATCH net-next v2 01/11] dt-bindings: net: dsa: convert ksz bindings document to yaml
On Monday, 16 November 2020, 15:37:20 CET, Rob Herring wrote:
> On Thu, 12 Nov 2020 16:35:27 +0100, Christian Eggers wrote:
> > Convert the bindings document for Microchip KSZ Series Ethernet switches
> > from txt to yaml.
> >
> > Signed-off-by: Christian Eggers <ceggers@...i.de>
> > ---
> >
> > .../devicetree/bindings/net/dsa/ksz.txt | 125 ---------------
> > .../bindings/net/dsa/microchip,ksz.yaml | 150 ++++++++++++++++++
> > MAINTAINERS | 2 +-
> > 3 files changed, 151 insertions(+), 126 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt
> > create mode 100644
> > Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa
> /microchip,ksz.yaml: 'oneOf' conditional failed, one must be fixed:
> 'unevaluatedProperties' is a required property
> 'additionalProperties' is a required property
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/dsa
> /microchip,ksz.yaml: ignoring, error in schema: warning: no schema found in
> file: ./Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
>
>
> See https://patchwork.ozlabs.org/patch/1399036
>
> The base for the patch is generally the last rc1. Any dependencies
> should be noted.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
with the latest dtschema I get further warnings:
/home/.../build-net-next/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@0: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/.../Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
/home/.../build-net-next/Documentation/devicetree/bindings/net/dsa/microchip,ksz.example.dt.yaml: switch@1: 'ethernet-ports', 'reg', 'spi-cpha', 'spi-cpol', 'spi-max-frequency' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/.../Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
Which schema requires the regex 'pinctrl-[0-9]+'? I have tried to add pinctrl-0
properties to the switch@0 and switch@1 nodes, but that didn't help.
Current version of microchip,ksz.yaml is below.
regards
Christian
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip KSZ Series Ethernet switches
allOf:
- $ref: dsa.yaml#
maintainers:
- Marek Vasut <marex@...x.de>
- Woojung Huh <Woojung.Huh@...rochip.com>
properties:
# See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
# required and optional properties.
compatible:
enum:
- microchip,ksz8765
- microchip,ksz8794
- microchip,ksz8795
- microchip,ksz9477
- microchip,ksz9897
- microchip,ksz9896
- microchip,ksz9567
- microchip,ksz8565
- microchip,ksz9893
- microchip,ksz9563
- microchip,ksz8563
reset-gpios:
description:
Should be a gpio specifier for a reset line.
maxItems: 1
interrupts:
description:
Interrupt specifier for the INTRP_N line from the device.
maxItems: 1
microchip,synclko-125:
$ref: /schemas/types.yaml#/definitions/flag
description:
Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
// Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0 {
fixed-link {
speed = <1000>;
full-duplex;
};
};
spi0 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pinctrl_spi_ksz>;
cs-gpios = <&pioC 25 0>;
id = <1>;
ksz9477: switch@0 {
compatible = "microchip,ksz9477";
reg = <0>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; /* INTRP_N line */
spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "lan5";
};
port@5 {
reg = <5>;
label = "cpu";
ethernet = <ð0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
ksz8565: switch@1 {
compatible = "microchip,ksz8565";
reg = <1>;
spi-max-frequency = <44000000>;
spi-cpha;
spi-cpol;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <ð0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
...
Powered by blists - more mailing lists