| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CO6PR18MB38736FA3A7C79A59CC311441B0E10@CO6PR18MB3873.namprd18.prod.outlook.com>
Date: Wed, 18 Nov 2020 19:00:59 +0000
From: Stefan Chulski <stefanc@...vell.com>
To: Stefan Chulski <stefanc@...vell.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: "thomas.petazzoni@...tlin.com" <thomas.petazzoni@...tlin.com>,
"davem@...emloft.net" <davem@...emloft.net>,
Nadav Haklai <nadavh@...vell.com>,
Yan Markman <ymarkman@...vell.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Jakub Kicinski <kuba@...nel.org>
Subject: RE: [PATCH] net: mvpp2: divide fifo for dts-active ports only
> -----Original Message-----
> From: stefanc@...vell.com <stefanc@...vell.com>
> Sent: Wednesday, November 18, 2020 8:21 PM
> To: netdev@...r.kernel.org
> Cc: thomas.petazzoni@...tlin.com; davem@...emloft.net; Nadav Haklai
> <nadavh@...vell.com>; Yan Markman <ymarkman@...vell.com>; linux-
> kernel@...r.kernel.org; Stefan Chulski <stefanc@...vell.com>
> Subject: [PATCH] net: mvpp2: divide fifo for dts-active ports only
>
> From: Stefan Chulski <stefanc@...vell.com>
>
> Tx/Rx FIFO is a HW resource limited by total size, but shared by all ports of
> same CP110 and impacting port-performance.
> Do not divide the FIFO for ports which are not enabled in DTS, so active ports
> could have more FIFO.
>
> The active port mapping should be done in probe before FIFO-init.
>
> Signed-off-by: Stefan Chulski <stefanc@...vell.com>
> ---
> drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 23 +++--
> drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 129
> +++++++++++++++++-------
> 2 files changed, 108 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> index 8347758..6bd7e40 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> @@ -695,6 +695,9 @@
> /* Maximum number of supported ports */
> #define MVPP2_MAX_PORTS 4
>
> +/* Loopback port index */
> +#define MVPP2_LOOPBACK_PORT_INDEX 3
> +
> /* Maximum number of TXQs used by single port */
> #define MVPP2_MAX_TXQ 8
>
> @@ -729,22 +732,21 @@
> #define MVPP2_TX_DESC_ALIGN (MVPP2_DESC_ALIGNED_SIZE
> - 1)
>
> /* RX FIFO constants */
> +#define MVPP2_RX_FIFO_PORT_DATA_SIZE_44KB 0xb000
> #define MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB 0x8000
> #define MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB 0x2000
> #define MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB 0x1000
> -#define MVPP2_RX_FIFO_PORT_ATTR_SIZE_32KB 0x200
> -#define MVPP2_RX_FIFO_PORT_ATTR_SIZE_8KB 0x80
> +#define MVPP2_RX_FIFO_PORT_ATTR_SIZE(data_size) ((data_size) >> 6)
> #define MVPP2_RX_FIFO_PORT_ATTR_SIZE_4KB 0x40
> #define MVPP2_RX_FIFO_PORT_MIN_PKT 0x80
>
> /* TX FIFO constants */
> -#define MVPP22_TX_FIFO_DATA_SIZE_10KB 0xa
> -#define MVPP22_TX_FIFO_DATA_SIZE_3KB 0x3
> -#define MVPP2_TX_FIFO_THRESHOLD_MIN 256
> -#define MVPP2_TX_FIFO_THRESHOLD_10KB \
> - (MVPP22_TX_FIFO_DATA_SIZE_10KB * 1024 -
> MVPP2_TX_FIFO_THRESHOLD_MIN)
> -#define MVPP2_TX_FIFO_THRESHOLD_3KB \
> - (MVPP22_TX_FIFO_DATA_SIZE_3KB * 1024 -
> MVPP2_TX_FIFO_THRESHOLD_MIN)
> +#define MVPP22_TX_FIFO_DATA_SIZE_16KB 16
> +#define MVPP22_TX_FIFO_DATA_SIZE_10KB 10
> +#define MVPP22_TX_FIFO_DATA_SIZE_3KB 3
> +#define MVPP2_TX_FIFO_THRESHOLD_MIN 256 /* Bytes */
> +#define MVPP2_TX_FIFO_THRESHOLD(kb) \
> + ((kb) * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
>
> /* RX buffer constants */
> #define MVPP2_SKB_SHINFO_SIZE \
> @@ -946,6 +948,9 @@ struct mvpp2 {
> /* List of pointers to port structures */
> int port_count;
> struct mvpp2_port *port_list[MVPP2_MAX_PORTS];
> + /* Map of enabled ports */
> + unsigned long port_map;
> +
> struct mvpp2_tai *tai;
>
> /* Number of Tx threads used */
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index f6616c8..9ff5f57 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -6601,32 +6601,56 @@ static void mvpp2_rx_fifo_init(struct mvpp2 *priv)
> mvpp2_write(priv, MVPP2_RX_FIFO_INIT_REG, 0x1); }
>
> -static void mvpp22_rx_fifo_init(struct mvpp2 *priv)
> +static void mvpp22_rx_fifo_set_hw(struct mvpp2 *priv, int port, int
> +data_size)
> {
> - int port;
> + int attr_size = MVPP2_RX_FIFO_PORT_ATTR_SIZE(data_size);
>
> - /* The FIFO size parameters are set depending on the maximum speed
> a
> - * given port can handle:
> - * - Port 0: 10Gbps
> - * - Port 1: 2.5Gbps
> - * - Ports 2 and 3: 1Gbps
> - */
> + mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(port), data_size);
> + mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(port), attr_size); }
>
> - mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(0),
> - MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB);
> - mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(0),
> - MVPP2_RX_FIFO_PORT_ATTR_SIZE_32KB);
> +/* Initialize TX FIFO's: the total FIFO size is 48kB on PPv2.2.
> + * 4kB fixed space must be assigned for the loopback port.
> + * Redistribute remaining avialable 44kB space among all active ports.
> + * Guarantee minimum 32kB for 10G port and 8kB for port 1, capable of
> +2.5G
> + * SGMII link.
> + */
> +static void mvpp22_rx_fifo_init(struct mvpp2 *priv) {
> + int port, size;
> + unsigned long port_map;
> + int remaining_ports_count;
> + int size_remainder;
> +
> + /* The loopback requires fixed 4kB of the FIFO space assignment. */
> + mvpp22_rx_fifo_set_hw(priv, MVPP2_LOOPBACK_PORT_INDEX,
> + MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB);
> + port_map = priv->port_map & ~BIT(MVPP2_LOOPBACK_PORT_INDEX);
> +
> + /* Set RX FIFO size to 0 for inactive ports. */
> + for_each_clear_bit(port, &port_map,
> MVPP2_LOOPBACK_PORT_INDEX)
> + mvpp22_rx_fifo_set_hw(priv, port, 0);
> +
> + /* Assign remaining RX FIFO space among all active ports. */
> + size_remainder = MVPP2_RX_FIFO_PORT_DATA_SIZE_44KB;
> + remaining_ports_count = hweight_long(port_map);
> +
> + for_each_set_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX) {
> + if (remaining_ports_count == 1)
> + size = size_remainder;
> + else if (port == 0)
> + size = max(size_remainder / remaining_ports_count,
> + MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB);
> + else if (port == 1)
> + size = max(size_remainder / remaining_ports_count,
> + MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB);
> + else
> + size = size_remainder / remaining_ports_count;
>
> - mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(1),
> - MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB);
> - mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(1),
> - MVPP2_RX_FIFO_PORT_ATTR_SIZE_8KB);
> + size_remainder -= size;
> + remaining_ports_count--;
>
> - for (port = 2; port < MVPP2_MAX_PORTS; port++) {
> - mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(port),
> - MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB);
> - mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(port),
> - MVPP2_RX_FIFO_PORT_ATTR_SIZE_4KB);
> + mvpp22_rx_fifo_set_hw(priv, port, size);
> }
>
> mvpp2_write(priv, MVPP2_RX_MIN_PKT_SIZE_REG, @@ -6634,24
> +6658,53 @@ static void mvpp22_rx_fifo_init(struct mvpp2 *priv)
> mvpp2_write(priv, MVPP2_RX_FIFO_INIT_REG, 0x1); }
>
> -/* Initialize Tx FIFO's: the total FIFO size is 19kB on PPv2.2 and 10G
> - * interfaces must have a Tx FIFO size of 10kB. As only port 0 can do 10G,
> - * configure its Tx FIFO size to 10kB and the others ports Tx FIFO size to 3kB.
> +static void mvpp22_tx_fifo_set_hw(struct mvpp2 *priv, int port, int
> +size) {
> + int threshold = MVPP2_TX_FIFO_THRESHOLD(size);
> +
> + mvpp2_write(priv, MVPP22_TX_FIFO_SIZE_REG(port), size);
> + mvpp2_write(priv, MVPP22_TX_FIFO_THRESH_REG(port), threshold); }
> +
> +/* Initialize TX FIFO's: the total FIFO size is 19kB on PPv2.2.
> + * 3kB fixed space must be assigned for the loopback port.
> + * Redistribute remaining avialable 16kB space among all active ports.
> + * The 10G interface should use 10kB (which is maximum possible size
> + * per single port).
> */
> static void mvpp22_tx_fifo_init(struct mvpp2 *priv) {
> - int port, size, thrs;
> -
> - for (port = 0; port < MVPP2_MAX_PORTS; port++) {
> - if (port == 0) {
> + int port, size;
> + unsigned long port_map;
> + int remaining_ports_count;
> + int size_remainder;
> +
> + /* The loopback requires fixed 3kB of the FIFO space assignment. */
> + mvpp22_tx_fifo_set_hw(priv, MVPP2_LOOPBACK_PORT_INDEX,
> + MVPP22_TX_FIFO_DATA_SIZE_3KB);
> + port_map = priv->port_map & ~BIT(MVPP2_LOOPBACK_PORT_INDEX);
> +
> + /* Set TX FIFO size to 0 for inactive ports. */
> + for_each_clear_bit(port, &port_map,
> MVPP2_LOOPBACK_PORT_INDEX)
> + mvpp22_tx_fifo_set_hw(priv, port, 0);
> +
> + /* Assign remaining TX FIFO space among all active ports. */
> + size_remainder = MVPP22_TX_FIFO_DATA_SIZE_16KB;
> + remaining_ports_count = hweight_long(port_map);
> +
> + for_each_set_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX) {
> + if (remaining_ports_count == 1)
> + size = min(size_remainder,
> + MVPP22_TX_FIFO_DATA_SIZE_10KB);
> + else if (port == 0)
> size = MVPP22_TX_FIFO_DATA_SIZE_10KB;
> - thrs = MVPP2_TX_FIFO_THRESHOLD_10KB;
> - } else {
> - size = MVPP22_TX_FIFO_DATA_SIZE_3KB;
> - thrs = MVPP2_TX_FIFO_THRESHOLD_3KB;
> - }
> - mvpp2_write(priv, MVPP22_TX_FIFO_SIZE_REG(port), size);
> - mvpp2_write(priv, MVPP22_TX_FIFO_THRESH_REG(port),
> thrs);
> + else
> + size = size_remainder / remaining_ports_count;
> +
> + size_remainder -= size;
> + remaining_ports_count--;
> +
> + mvpp22_tx_fifo_set_hw(priv, port, size);
> }
> }
>
> @@ -6952,6 +7005,12 @@ static int mvpp2_probe(struct platform_device
> *pdev)
> goto err_axi_clk;
> }
>
> + /* Map DTS-active ports. Should be done before FIFO mvpp2_init */
> + fwnode_for_each_available_child_node(fwnode, port_fwnode) {
> + if (!fwnode_property_read_u32(port_fwnode, "port-id", &i))
> + priv->port_map |= BIT(i);
> + }
> +
> /* Initialize network controller */
> err = mvpp2_init(pdev, priv);
> if (err < 0) {
> --
> 1.9.1
Jakub Kicinski added to CC
Powered by blists - more mailing lists