netdev - Re: [PATCH net-next 3/8] net: dsa: microchip: add DSA support for microchip lan937x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Mon, 15 Mar 2021 11:55:11 +0530
From:   Prasanna Vengateshan Varadharajan 
        <prasanna.vengateshan@...rochip.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     <olteanv@...il.com>, <netdev@...r.kernel.org>,
        <robh+dt@...nel.org>, <kuba@...nel.org>,
        <vivien.didelot@...il.com>, <f.fainelli@...il.com>,
        <davem@...emloft.net>, <UNGLinuxDriver@...rochip.com>,
        <Woojung.Huh@...rochip.com>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>
Subject: Re: [PATCH net-next 3/8] net: dsa: microchip: add DSA support for
 microchip lan937x

On Fri, 2021-02-05 at 14:27 +0100, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> > > > +bool lan937x_is_internal_tx_phy_port(struct ksz_device *dev,
> > > > int
> > > > port)
> > > > +{
> > > > +     /* Check if the port is internal tx phy port */
> > > 
> > > What is an internal TX phy port? Is it actually a conventional t2
> > > Fast
> > > Ethernet port, as opposed to a t1 port?
> > This is 100 Base-Tx phy which is compliant with
> > 802.3/802.3u standards. Two of the SKUs have both T1 and TX
> > integrated
> > Phys as mentioned in the patch intro mail.
> 
> I don't think we have a good name for a conventional fast Ethernet.
> But since we call the other T1, since it has a single pair, maybe use
> T2, since Fast Ethernet uses 2 pair. I would also suggest a comment
> near this code explaining what T1 and T2 mean.
This is compliant with 802.3u (100 Base-Tx) as i mentioned above. So
naming it as "T2" would not match. Can we name it as "100BTX" instead
of Tx? Thanks.