[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <00b801d721a2$91b73300$b5259900$@thebollingers.org>
Date: Thu, 25 Mar 2021 11:13:33 -0700
From: "Don Bollinger" <don@...bollingers.org>
To: "'Moshe Shemesh'" <moshe@...dia.com>,
"'David S. Miller'" <davem@...emloft.net>,
"'Jakub Kicinski'" <kuba@...nel.org>,
"'Andrew Lunn'" <andrew@...n.ch>,
"'Adrian Pop'" <pop.adrian61@...il.com>,
"'Michal Kubecek'" <mkubecek@...e.cz>, <netdev@...r.kernel.org>
Cc: "'Vladyslav Tarasiuk'" <vladyslavt@...dia.com>,
<don@...bollingers.org>
Subject: RE: [RFC PATCH V5 net-next 5/5] ethtool: Add fallback to get_module_eeprom from netlink command
> From: Vladyslav Tarasiuk <vladyslavt@...dia.com>
>
> In case netlink get_module_eeprom_by_page() callback is not implemented
> by the driver, try to call old get_module_info() and get_module_eeprom()
> pair. Recalculate parameters to get_module_eeprom() offset and len using
> page number and their sizes. Return error if this can't be done.
>
> Signed-off-by: Vladyslav Tarasiuk <vladyslavt@...dia.com>
> ---
> net/ethtool/eeprom.c | 66
> +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/net/ethtool/eeprom.c b/net/ethtool/eeprom.c index
> 10d5f6b34f2f..9f773b778bbe 100644
> --- a/net/ethtool/eeprom.c
> +++ b/net/ethtool/eeprom.c
> @@ -25,6 +25,70 @@ struct eeprom_reply_data { #define
> MODULE_EEPROM_REPDATA(__reply_base) \
> container_of(__reply_base, struct eeprom_reply_data, base)
>
> +static int fallback_set_params(struct eeprom_req_info *request,
> + struct ethtool_modinfo *modinfo,
> + struct ethtool_eeprom *eeprom) {
> + u32 offset = request->offset;
> + u32 length = request->length;
> +
> + if (request->page)
> + offset = request->page *
> ETH_MODULE_EEPROM_PAGE_LEN + offset;
The test 'if (request->page)' is not necessary, the math works with page 0
as well. Keep it if you like the style.
> +
> + if (modinfo->type == ETH_MODULE_SFF_8079 &&
> + request->i2c_address == 0x51)
> + offset += ETH_MODULE_EEPROM_PAGE_LEN;
offset += ETH_MODULE_EEPROM_PAGE_LEN * 2;
Now that PAGE_LEN is 128, you need two of them to account for both low
memory and high memory at 0x50.
> +
> + if (offset >= modinfo->eeprom_len)
> + return -EINVAL;
> +
> + eeprom->cmd = ETHTOOL_GMODULEEEPROM;
> + eeprom->len = length;
> + eeprom->offset = offset;
> +
> + return 0;
> +}
> +
> +static int eeprom_fallback(struct eeprom_req_info *request,
> + struct eeprom_reply_data *reply,
> + struct genl_info *info)
> +{
> + struct net_device *dev = reply->base.dev;
> + struct ethtool_modinfo modinfo = {0};
> + struct ethtool_eeprom eeprom = {0};
> + u8 *data;
> + int err;
> +
> + if (!dev->ethtool_ops->get_module_info ||
> + !dev->ethtool_ops->get_module_eeprom || request->bank) {
> + return -EOPNOTSUPP;
> + }
> + modinfo.cmd = ETHTOOL_GMODULEINFO;
> + err = dev->ethtool_ops->get_module_info(dev, &modinfo);
> + if (err < 0)
> + return err;
> +
> + err = fallback_set_params(request, &modinfo, &eeprom);
> + if (err < 0)
> + return err;
> +
> + data = kmalloc(eeprom.len, GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> + err = dev->ethtool_ops->get_module_eeprom(dev, &eeprom,
> data);
> + if (err < 0)
> + goto err_out;
> +
> + reply->data = data;
> + reply->length = eeprom.len;
> +
> + return 0;
> +
> +err_out:
> + kfree(data);
> + return err;
> +}
> +
> static int eeprom_prepare_data(const struct ethnl_req_info *req_base,
> struct ethnl_reply_data *reply_base,
> struct genl_info *info)
> @@ -36,7 +100,7 @@ static int eeprom_prepare_data(const struct
> ethnl_req_info *req_base,
> int ret;
>
> if (!dev->ethtool_ops->get_module_eeprom_by_page)
> - return -EOPNOTSUPP;
> + return eeprom_fallback(request, reply, info);
>
> page_data.offset = request->offset;
> page_data.length = request->length;
> --
> 2.18.2
Powered by blists - more mailing lists