[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210412202912.GA20105@anparri>
Date: Mon, 12 Apr 2021 22:29:12 +0200
From: Andrea Parri <parri.andrea@...il.com>
To: Michael Kelley <mikelley@...rosoft.com>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
KY Srinivasan <kys@...rosoft.com>,
Haiyang Zhang <haiyangz@...rosoft.com>,
Stephen Hemminger <sthemmin@...rosoft.com>,
"wei.liu@...nel.org" <wei.liu@...nel.org>,
"davem@...emloft.net" <davem@...emloft.net>,
"kuba@...nel.org" <kuba@...nel.org>,
"jejb@...ux.ibm.com" <jejb@...ux.ibm.com>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>
Subject: Re: [RFC PATCH hyperv-next] scsi: storvsc: Use blk_mq_unique_tag()
to generate requestIDs
On Fri, Apr 09, 2021 at 03:38:14PM +0000, Michael Kelley wrote:
> From: Andrea Parri (Microsoft) <parri.andrea@...il.com> Sent: Thursday, April 8, 2021 9:13 AM
> >
> > Use blk_mq_unique_tag() to generate requestIDs for StorVSC, avoiding
> > all issues with allocating enough entries in the VMbus requestor.
>
> This looks good to me! I'm glad to see that the idea worked without
> too much complexity.
>
> See a few comments inline below.
Thank you for these suggestions; I've tried to implement them, cf. the
diff at the bottom of this email (on top of this RFC, plus 'change the
storvsc callbacks to 'static''). I like the result, however this does
not work well yet: I am getting 'Incorrect transaction id' messages at
boot time with this diff; I'll dig more tomorrow... hints are welcome!
Andrea
>
> >
> > Suggested-by: Michael Kelley <mikelley@...rosoft.com>
> > Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@...il.com>
> > ---
> > drivers/hv/channel.c | 14 +++---
> > drivers/hv/ring_buffer.c | 12 ++---
> > drivers/net/hyperv/netvsc.c | 8 ++--
> > drivers/net/hyperv/rndis_filter.c | 2 +
> > drivers/scsi/storvsc_drv.c | 73 ++++++++++++++++++++++++++-----
> > include/linux/hyperv.h | 13 +++++-
> > 6 files changed, 92 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
> > index db30be8f9ccea..f78e02ace51e8 100644
> > --- a/drivers/hv/channel.c
> > +++ b/drivers/hv/channel.c
> > @@ -1121,15 +1121,14 @@ EXPORT_SYMBOL_GPL(vmbus_recvpacket_raw);
> > * vmbus_next_request_id - Returns a new request id. It is also
> > * the index at which the guest memory address is stored.
> > * Uses a spin lock to avoid race conditions.
> > - * @rqstor: Pointer to the requestor struct
> > + * @channel: Pointer to the VMbus channel struct
> > * @rqst_add: Guest memory address to be stored in the array
> > */
> > -u64 vmbus_next_request_id(struct vmbus_requestor *rqstor, u64 rqst_addr)
> > +u64 vmbus_next_request_id(struct vmbus_channel *channel, u64 rqst_addr)
> > {
> > + struct vmbus_requestor *rqstor = &channel->requestor;
> > unsigned long flags;
> > u64 current_id;
> > - const struct vmbus_channel *channel =
> > - container_of(rqstor, const struct vmbus_channel, requestor);
> >
> > /* Check rqstor has been initialized */
> > if (!channel->rqstor_size)
> > @@ -1163,16 +1162,15 @@ EXPORT_SYMBOL_GPL(vmbus_next_request_id);
> > /*
> > * vmbus_request_addr - Returns the memory address stored at @trans_id
> > * in @rqstor. Uses a spin lock to avoid race conditions.
> > - * @rqstor: Pointer to the requestor struct
> > + * @channel: Pointer to the VMbus channel struct
> > * @trans_id: Request id sent back from Hyper-V. Becomes the requestor's
> > * next request id.
> > */
> > -u64 vmbus_request_addr(struct vmbus_requestor *rqstor, u64 trans_id)
> > +u64 vmbus_request_addr(struct vmbus_channel *channel, u64 trans_id)
> > {
> > + struct vmbus_requestor *rqstor = &channel->requestor;
> > unsigned long flags;
> > u64 req_addr;
> > - const struct vmbus_channel *channel =
> > - container_of(rqstor, const struct vmbus_channel, requestor);
> >
> > /* Check rqstor has been initialized */
> > if (!channel->rqstor_size)
> > diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
> > index ecd82ebfd5bc4..46d8e038e4ee1 100644
> > --- a/drivers/hv/ring_buffer.c
> > +++ b/drivers/hv/ring_buffer.c
> > @@ -310,10 +310,12 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
> > */
> >
> > if (desc->flags == VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED) {
> > - rqst_id = vmbus_next_request_id(&channel->requestor, requestid);
> > - if (rqst_id == VMBUS_RQST_ERROR) {
> > - spin_unlock_irqrestore(&outring_info->ring_lock, flags);
> > - return -EAGAIN;
> > + if (channel->next_request_id_callback != NULL) {
> > + rqst_id = channel->next_request_id_callback(channel, requestid);
> > + if (rqst_id == VMBUS_RQST_ERROR) {
> > + spin_unlock_irqrestore(&outring_info->ring_lock, flags);
> > + return -EAGAIN;
> > + }
> > }
> > }
> > desc = hv_get_ring_buffer(outring_info) + old_write;
> > @@ -341,7 +343,7 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
> > if (channel->rescind) {
> > if (rqst_id != VMBUS_NO_RQSTOR) {
> > /* Reclaim request ID to avoid leak of IDs */
> > - vmbus_request_addr(&channel->requestor, rqst_id);
> > + channel->request_addr_callback(channel, rqst_id);
> > }
> > return -ENODEV;
> > }
> > diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
> > index c64cc7639c39c..1a221ce2d6fdc 100644
> > --- a/drivers/net/hyperv/netvsc.c
> > +++ b/drivers/net/hyperv/netvsc.c
> > @@ -730,7 +730,7 @@ static void netvsc_send_tx_complete(struct net_device *ndev,
> > int queue_sends;
> > u64 cmd_rqst;
> >
> > - cmd_rqst = vmbus_request_addr(&channel->requestor, (u64)desc->trans_id);
> > + cmd_rqst = channel->request_addr_callback(channel, (u64)desc->trans_id);
> > if (cmd_rqst == VMBUS_RQST_ERROR) {
> > netdev_err(ndev, "Incorrect transaction id\n");
> > return;
> > @@ -790,8 +790,8 @@ static void netvsc_send_completion(struct net_device *ndev,
> >
> > /* First check if this is a VMBUS completion without data payload */
> > if (!msglen) {
> > - cmd_rqst = vmbus_request_addr(&incoming_channel->requestor,
> > - (u64)desc->trans_id);
> > + cmd_rqst = incoming_channel->request_addr_callback(incoming_channel,
> > + (u64)desc->trans_id);
> > if (cmd_rqst == VMBUS_RQST_ERROR) {
> > netdev_err(ndev, "Invalid transaction id\n");
> > return;
> > @@ -1602,6 +1602,8 @@ struct netvsc_device *netvsc_device_add(struct hv_device
> > *device,
> > netvsc_poll, NAPI_POLL_WEIGHT);
> >
> > /* Open the channel */
> > + device->channel->next_request_id_callback = vmbus_next_request_id;
> > + device->channel->request_addr_callback = vmbus_request_addr;
> > device->channel->rqstor_size = netvsc_rqstor_size(netvsc_ring_bytes);
> > ret = vmbus_open(device->channel, netvsc_ring_bytes,
> > netvsc_ring_bytes, NULL, 0,
> > diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
> > index 123cc9d25f5ed..ebf34bf3f9075 100644
> > --- a/drivers/net/hyperv/rndis_filter.c
> > +++ b/drivers/net/hyperv/rndis_filter.c
> > @@ -1259,6 +1259,8 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc)
> > /* Set the channel before opening.*/
> > nvchan->channel = new_sc;
> >
> > + new_sc->next_request_id_callback = vmbus_next_request_id;
> > + new_sc->request_addr_callback = vmbus_request_addr;
> > new_sc->rqstor_size = netvsc_rqstor_size(netvsc_ring_bytes);
> > ret = vmbus_open(new_sc, netvsc_ring_bytes,
> > netvsc_ring_bytes, NULL, 0,
> > diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
> > index 6bc5453cea8a7..1c05fabc06b04 100644
> > --- a/drivers/scsi/storvsc_drv.c
> > +++ b/drivers/scsi/storvsc_drv.c
> > @@ -684,6 +684,62 @@ static void storvsc_change_target_cpu(struct vmbus_channel
> > *channel, u32 old,
> > spin_unlock_irqrestore(&stor_device->lock, flags);
> > }
> >
> > +u64 storvsc_next_request_id(struct vmbus_channel *channel, u64 rqst_addr)
> > +{
> > + struct storvsc_cmd_request *request =
> > + (struct storvsc_cmd_request *)(unsigned long)rqst_addr;
> > + struct storvsc_device *stor_device;
> > + struct hv_device *device;
> > +
> > + device = (channel->primary_channel != NULL) ?
> > + channel->primary_channel->device_obj : channel->device_obj;
> > + if (device == NULL)
> > + return VMBUS_RQST_ERROR;
> > +
> > + stor_device = get_out_stor_device(device);
> > + if (stor_device == NULL)
> > + return VMBUS_RQST_ERROR;
> > +
> > + if (request == &stor_device->init_request)
> > + return VMBUS_RQST_INIT;
> > + if (request == &stor_device->reset_request)
> > + return VMBUS_RQST_RESET;
>
> Having to get the device and then the stor_device in order to detect the
> init_request and reset_request special cases is unfortunate. So here's
> an idea: The init_request and reset_request are used in a limited number
> of specific places in the storvsc driver, and there are unique invocations
> of vmbus_sendpacket() in those places. So rather than pass the address
> of the request as the requestID parameter to vmbus_sendpacket(), pass
> the sentinel value VMBUS_RQST_INIT or VMBUS_RQST_RESET. Then this
> code can just detect those sentinel values as the rqst_addr input
> parameter, and return them.
>
> > +
> > + return blk_mq_unique_tag(request->cmd->request);
> > +}
> > +
> > +u64 storvsc_request_addr(struct vmbus_channel *channel, u64 rqst_id)
> > +{
> > + struct storvsc_cmd_request *request;
> > + struct storvsc_device *stor_device;
> > + struct hv_device *device;
> > + struct Scsi_Host *shost;
> > + struct scsi_cmnd *scmnd;
> > +
> > + device = (channel->primary_channel != NULL) ?
> > + channel->primary_channel->device_obj : channel->device_obj;
> > + if (device == NULL)
> > + return VMBUS_RQST_ERROR;
> > +
> > + stor_device = get_out_stor_device(device);
> > + if (stor_device == NULL)
> > + return VMBUS_RQST_ERROR;
> > +
> > + if (rqst_id == VMBUS_RQST_INIT)
> > + return (unsigned long)&stor_device->init_request;
> > + if (rqst_id == VMBUS_RQST_RESET)
> > + return (unsigned long)&stor_device->reset_request;
>
> Unfortunately, the same simplification doesn't work here. And you need
> stor_device anyway to get the scsi_host.
>
> > +
> > + shost = stor_device->host;
> > +
> > + scmnd = scsi_host_find_tag(shost, rqst_id);
> > + if (scmnd == NULL)
> > + return VMBUS_RQST_ERROR;
> > +
> > + request = (struct storvsc_cmd_request *)(unsigned long)scsi_cmd_priv(scmnd);
> > + return (unsigned long)request;
>
> The casts in the above two lines seem unnecessarily complex. 'request' is never
> used as a pointer. So couldn't the last two lines just be:
>
> return (unsigned long)scsi_cmd_priv(scmnd);
>
> > +}
> > +
> > static void handle_sc_creation(struct vmbus_channel *new_sc)
> > {
> > struct hv_device *device = new_sc->primary_channel->device_obj;
> > @@ -698,11 +754,8 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
> >
> > memset(&props, 0, sizeof(struct vmstorage_channel_properties));
> >
> > - /*
> > - * The size of vmbus_requestor is an upper bound on the number of requests
> > - * that can be in-progress at any one time across all channels.
> > - */
> > - new_sc->rqstor_size = scsi_driver.can_queue;
> > + new_sc->next_request_id_callback = storvsc_next_request_id;
> > + new_sc->request_addr_callback = storvsc_request_addr;
> >
> > ret = vmbus_open(new_sc,
> > storvsc_ringbuffer_size,
> > @@ -1255,8 +1308,7 @@ static void storvsc_on_channel_callback(void *context)
> > struct storvsc_cmd_request *request;
> > u64 cmd_rqst;
> >
> > - cmd_rqst = vmbus_request_addr(&channel->requestor,
> > - desc->trans_id);
> > + cmd_rqst = channel->request_addr_callback(channel, desc->trans_id);
>
> Here's another thought: You don't really need to set the channel request_addr_callback
> function and then indirect through it here. You know the specific function that storvsc
> is using, so could call it directly. The other reason to set request_addr_callback is so
> that at the end of hv_ringbuffer_write() you can reclaim an allocated requestID if the
> rescind flag is set. But there's nothing allocated that needs to be reclaimed in the storvsc
> case, so leaving request_addr_callback as NULL is OK (but hv_ringbuffer_write would
> have to check for the NULL).
>
> Then if you do that, the logic in storvsc_request_addr() can effectively go inline in
> here. And that logic can take advantage of the fact that stor_device is already determined
> outside the foreach_vmbus_pkt() loop. The scsi_host could be calculated outside the loop
> as well, leaving the detection of init_request and reset_request, and the call to
> scsi_host_find_tag() as the only things to do.
>
> This approach is a bit asymmetrical, but it would save some processing in this interrupt
> handling code. So something to consider.
>
> > if (cmd_rqst == VMBUS_RQST_ERROR) {
> > dev_err(&device->device,
> > "Incorrect transaction id\n");
> > @@ -1290,11 +1342,8 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32
> > ring_size,
> >
> > memset(&props, 0, sizeof(struct vmstorage_channel_properties));
> >
> > - /*
> > - * The size of vmbus_requestor is an upper bound on the number of requests
> > - * that can be in-progress at any one time across all channels.
> > - */
> > - device->channel->rqstor_size = scsi_driver.can_queue;
> > + device->channel->next_request_id_callback = storvsc_next_request_id;
> > + device->channel->request_addr_callback = storvsc_request_addr;
> >
> > ret = vmbus_open(device->channel,
> > ring_size,
> > diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> > index 2c18c8e768efe..5692ffa60e022 100644
> > --- a/include/linux/hyperv.h
> > +++ b/include/linux/hyperv.h
> > @@ -779,7 +779,11 @@ struct vmbus_requestor {
> >
> > #define VMBUS_NO_RQSTOR U64_MAX
> > #define VMBUS_RQST_ERROR (U64_MAX - 1)
> > +/* NetVSC-specific */
>
> It is netvsc specific at the moment. But if we harden other
> drivers, they are likely to use the same generic requestID
> allocator, and hence need the same sentinel value.
>
> > #define VMBUS_RQST_ID_NO_RESPONSE (U64_MAX - 2)
> > +/* StorVSC-specific */
> > +#define VMBUS_RQST_INIT (U64_MAX - 2)
> > +#define VMBUS_RQST_RESET (U64_MAX - 3)
> >
> > struct vmbus_device {
> > u16 dev_type;
> > @@ -1007,13 +1011,18 @@ struct vmbus_channel {
> > u32 fuzz_testing_interrupt_delay;
> > u32 fuzz_testing_message_delay;
> >
> > + /* callback to generate a request ID from a request address */
> > + u64 (*next_request_id_callback)(struct vmbus_channel *channel, u64 rqst_addr);
> > + /* callback to retrieve a request address from a request ID */
> > + u64 (*request_addr_callback)(struct vmbus_channel *channel, u64 rqst_id);
> > +
> > /* request/transaction ids for VMBus */
> > struct vmbus_requestor requestor;
> > u32 rqstor_size;
> > };
> >
> > -u64 vmbus_next_request_id(struct vmbus_requestor *rqstor, u64 rqst_addr);
> > -u64 vmbus_request_addr(struct vmbus_requestor *rqstor, u64 trans_id);
> > +u64 vmbus_next_request_id(struct vmbus_channel *channel, u64 rqst_addr);
> > +u64 vmbus_request_addr(struct vmbus_channel *channel, u64 trans_id);
> >
> > static inline bool is_hvsock_channel(const struct vmbus_channel *c)
> > {
> > --
> > 2.25.1
>
diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 46d8e038e4ee1..2bf57677272b5 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -343,7 +343,8 @@ int hv_ringbuffer_write(struct vmbus_channel *channel,
if (channel->rescind) {
if (rqst_id != VMBUS_NO_RQSTOR) {
/* Reclaim request ID to avoid leak of IDs */
- channel->request_addr_callback(channel, rqst_id);
+ if (channel->request_addr_callback != NULL)
+ channel->request_addr_callback(channel, rqst_id);
}
return -ENODEV;
}
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 1aa94229b6558..8548834e48624 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -688,58 +688,15 @@ static u64 storvsc_next_request_id(struct vmbus_channel *channel, u64 rqst_addr)
{
struct storvsc_cmd_request *request =
(struct storvsc_cmd_request *)(unsigned long)rqst_addr;
- struct storvsc_device *stor_device;
- struct hv_device *device;
-
- device = (channel->primary_channel != NULL) ?
- channel->primary_channel->device_obj : channel->device_obj;
- if (device == NULL)
- return VMBUS_RQST_ERROR;
-
- stor_device = get_out_stor_device(device);
- if (stor_device == NULL)
- return VMBUS_RQST_ERROR;
- if (request == &stor_device->init_request)
+ if (rqst_addr == VMBUS_RQST_INIT)
return VMBUS_RQST_INIT;
- if (request == &stor_device->reset_request)
+ if (rqst_addr == VMBUS_RQST_RESET)
return VMBUS_RQST_RESET;
return blk_mq_unique_tag(request->cmd->request);
}
-static u64 storvsc_request_addr(struct vmbus_channel *channel, u64 rqst_id)
-{
- struct storvsc_cmd_request *request;
- struct storvsc_device *stor_device;
- struct hv_device *device;
- struct Scsi_Host *shost;
- struct scsi_cmnd *scmnd;
-
- device = (channel->primary_channel != NULL) ?
- channel->primary_channel->device_obj : channel->device_obj;
- if (device == NULL)
- return VMBUS_RQST_ERROR;
-
- stor_device = get_out_stor_device(device);
- if (stor_device == NULL)
- return VMBUS_RQST_ERROR;
-
- if (rqst_id == VMBUS_RQST_INIT)
- return (unsigned long)&stor_device->init_request;
- if (rqst_id == VMBUS_RQST_RESET)
- return (unsigned long)&stor_device->reset_request;
-
- shost = stor_device->host;
-
- scmnd = scsi_host_find_tag(shost, rqst_id);
- if (scmnd == NULL)
- return VMBUS_RQST_ERROR;
-
- request = (struct storvsc_cmd_request *)(unsigned long)scsi_cmd_priv(scmnd);
- return (unsigned long)request;
-}
-
static void handle_sc_creation(struct vmbus_channel *new_sc)
{
struct hv_device *device = new_sc->primary_channel->device_obj;
@@ -755,7 +712,6 @@ static void handle_sc_creation(struct vmbus_channel *new_sc)
memset(&props, 0, sizeof(struct vmstorage_channel_properties));
new_sc->next_request_id_callback = storvsc_next_request_id;
- new_sc->request_addr_callback = storvsc_request_addr;
ret = vmbus_open(new_sc,
storvsc_ringbuffer_size,
@@ -822,7 +778,7 @@ static void handle_multichannel_storage(struct hv_device *device, int max_chns)
ret = vmbus_sendpacket(device->channel, vstor_packet,
(sizeof(struct vstor_packet) -
stor_device->vmscsi_size_delta),
- (unsigned long)request,
+ VMBUS_RQST_INIT,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
@@ -891,7 +847,7 @@ static int storvsc_execute_vstor_op(struct hv_device *device,
ret = vmbus_sendpacket(device->channel, vstor_packet,
(sizeof(struct vstor_packet) -
stor_device->vmscsi_size_delta),
- (unsigned long)request,
+ VMBUS_RQST_INIT,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
@@ -1293,6 +1249,7 @@ static void storvsc_on_channel_callback(void *context)
const struct vmpacket_descriptor *desc;
struct hv_device *device;
struct storvsc_device *stor_device;
+ struct Scsi_Host *shost;
if (channel->primary_channel != NULL)
device = channel->primary_channel->device_obj;
@@ -1303,19 +1260,12 @@ static void storvsc_on_channel_callback(void *context)
if (!stor_device)
return;
+ shost = stor_device->host;
+
foreach_vmbus_pkt(desc, channel) {
void *packet = hv_pkt_data(desc);
struct storvsc_cmd_request *request;
- u64 cmd_rqst;
-
- cmd_rqst = channel->request_addr_callback(channel, desc->trans_id);
- if (cmd_rqst == VMBUS_RQST_ERROR) {
- dev_err(&device->device,
- "Incorrect transaction id\n");
- continue;
- }
-
- request = (struct storvsc_cmd_request *)(unsigned long)cmd_rqst;
+ u64 rqst_id = desc->trans_id;
if (hv_pkt_datalen(desc) < sizeof(struct vstor_packet) -
stor_device->vmscsi_size_delta) {
@@ -1323,14 +1273,26 @@ static void storvsc_on_channel_callback(void *context)
continue;
}
- if (request == &stor_device->init_request ||
- request == &stor_device->reset_request) {
- memcpy(&request->vstor_packet, packet,
- (sizeof(struct vstor_packet) - stor_device->vmscsi_size_delta));
- complete(&request->wait_event);
+ if (rqst_id == VMBUS_RQST_INIT) {
+ request = &stor_device->init_request;
+ } else if (rqst_id == VMBUS_RQST_RESET) {
+ request = &stor_device->reset_request;
} else {
+ struct scsi_cmnd *scmnd = scsi_host_find_tag(shost, rqst_id);
+
+ if (scmnd == NULL) {
+ dev_err(&device->device, "Incorrect transaction id\n");
+ continue;
+ }
+
+ request = (struct storvsc_cmd_request *)scsi_cmd_priv(scmnd);
storvsc_on_receive(stor_device, packet, request);
+ return;
}
+
+ memcpy(&request->vstor_packet, packet,
+ (sizeof(struct vstor_packet) - stor_device->vmscsi_size_delta));
+ complete(&request->wait_event);
}
}
@@ -1343,7 +1305,6 @@ static int storvsc_connect_to_vsp(struct hv_device *device, u32 ring_size,
memset(&props, 0, sizeof(struct vmstorage_channel_properties));
device->channel->next_request_id_callback = storvsc_next_request_id;
- device->channel->request_addr_callback = storvsc_request_addr;
ret = vmbus_open(device->channel,
ring_size,
@@ -1669,7 +1630,7 @@ static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd)
ret = vmbus_sendpacket(device->channel, vstor_packet,
(sizeof(struct vstor_packet) -
stor_device->vmscsi_size_delta),
- (unsigned long)&stor_device->reset_request,
+ VMBUS_RQST_RESET,
VM_PKT_DATA_INBAND,
VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
if (ret != 0)
Powered by blists - more mailing lists