[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210414151728.amjvjgnqlejrujwr@skbuf>
Date: Wed, 14 Apr 2021 18:17:28 +0300
From: Ioana Ciornei <ciorneiioana@...il.com>
To: davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org, ruxandra.radulescu@....com,
Ioana Ciornei <ioana.ciornei@....com>
Subject: Re: [PATCH net-next 0/5] dpaa2-switch: add tc hardware offload on
ingress traffic
On Tue, Apr 13, 2021 at 04:24:43PM +0300, Ioana Ciornei wrote:
> From: Ioana Ciornei <ioana.ciornei@....com>
>
> This patch set adds tc hardware offload on ingress traffic in
> dpaa2-switch. The cls flower and matchall classifiers are supported
> using the same ACL infrastructure supported by the dpaa2-switch.
>
> The first patch creates a new structure to hold all the necessary
> information related to an ACL table. This structure is used in the next
> patches to create a link between each switch port and the table used.
> Multiple ports can share the same ACL table when they also share the
> ingress tc block. Also, some small changes in the priority of the
> default STP trap is done in the second patch.
>
> The support for cls flower is added in the 3rd patch, while the 4th
> one builds on top of the infrastructure put in place and adds cls
> matchall support.
>
> The following flow keys are supported:
> - Ethernet: dst_mac/src_mac
> - IPv4: dst_ip/src_ip/ip_proto/tos
> - VLAN: vlan_id/vlan_prio/vlan_tpid/vlan_dei
> - L4: dst_port/src_port
>
> Each filter can support only one action from the following list:
> - drop
> - mirred egress redirect
> - trap
>
> With the last patch, we reuse the dpaa2_switch_acl_entry_add() function
> added previously instead of open-coding the install of a new ACL entry
> into the table.
>
> Ioana Ciornei (5):
> dpaa2-switch: create a central dpaa2_switch_acl_tbl structure
> dpaa2-switch: install default STP trap rule with the highest priority
> dpaa2-switch: add tc flower hardware offload on ingress traffic
> dpaa2-switch: add tc matchall filter support
> dpaa2-switch: reuse dpaa2_switch_acl_entry_add() for STP frames trap
>
This patch set is in the 'Accepted' state in patchwork but is nowhere to
be found in the net-next tree.
Should I do something else or it was just not pushed yet?
Ioana
Powered by blists - more mailing lists