[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <fa7cd362645763d382719f8ab0e72f429156444b.camel@intel.com>
Date: Tue, 4 May 2021 00:44:19 +0000
From: "Nguyen, Anthony L" <anthony.l.nguyen@...el.com>
To: "liwei.song@...driver.com" <liwei.song@...driver.com>,
"intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>
CC: "davem@...emloft.net" <davem@...emloft.net>,
"kuba@...nel.org" <kuba@...nel.org>,
"Venkataramanan, Anirudh" <anirudh.venkataramanan@...el.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ice: set the value of global config lock timeout longer
On Thu, 2021-04-22 at 11:16 -0700, Tony Nguyen wrote:
> On Wed, 2021-04-21 at 10:29 +0800, Liwei Song wrote:
> >
> > On 4/21/21 06:48, Nguyen, Anthony L wrote:
> > > On Mon, 2021-04-19 at 17:31 +0800, Liwei Song wrote:
> > > > It may need hold Global Config Lock a longer time when download
> > > > DDP
> > > > package file, extend the timeout value to 5000ms to ensure that
> > > > download can be finished before other AQ command got time to
> > > > run,
> > > > this will fix the issue below when probe the device, 5000ms is
> > > > a
> > > > test
> > > > value that work with both Backplane and BreakoutCable NVM
> > > > image:
> > > >
> > > > ice 0000:f4:00.0: VSI 12 failed lan queue config, error
> > > > ICE_ERR_CFG
> > > > ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error:
> > > > ICE_ERR_AQ_TIMEOUT
> > > > ice 0000:f4:00.0: probe failed due to setup PF switch: -12
> > > > ice: probe of 0000:f4:00.0 failed with error -12
> > >
> > > Hi Liwei,
> > >
> > > We haven't encountered this issue before. Can you provide some
> > > more
> > > info on your setup or how you're coming across this issue?
> > >
> > > Perhaps, lspci output and some more of the dmesg log? We'd like
> > > to
> > > try
> > > to reproduce this so we can invesitgate it further.
> >
> > Hi Tony,
> >
> > My board is Idaville ICE-D platform, it can be reproduced when
> > there is no QSFP Transceiver Module setup on it, it is not
> > happened on each "modprobe ice", about 1/8 rate to got that
> > error message when I loop run "modprobe -r ice && modprobe ice".
> > the port type is Backplane, and I haven't reproduce
> > it with Breakout mode.
>
> Hi Liwei,
>
> Thanks for the additional information. I've provided this to our
> validation team and asked they try to reproduce so we can look into
> it further.
Hi Liwei,
We were able to reproduce the issue. We found that this doesn't occur
on newer NVMs, however, it will still be awhile until those newer ones
are available.
In the interim, I'm going to have this patch tested to ensure it
doesn't cause any issues. If so, we'll use this value until the new
NVMs become available.
Thanks,
Tony
Powered by blists - more mailing lists