| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADVnQynoD=NF2hG6Bs44A0jrnKG=3f97OywS-tq-p-KQAsf5Fg@mail.gmail.com>
Date: Wed, 26 May 2021 08:11:17 -0400
From: Neal Cardwell <ncardwell@...gle.com>
To: Leonard Crestez <cdleonard@...il.com>
Cc: Matt Mathis <mattmathis@...gle.com>,
Eric Dumazet <edumazet@...gle.com>,
"David S. Miller" <davem@...emloft.net>,
Willem de Bruijn <willemb@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
David Ahern <dsahern@...nel.org>,
John Heffner <johnwheffner@...il.com>,
Leonard Crestez <lcrestez@...venets.com>,
Soheil Hassas Yeganeh <soheil@...gle.com>,
Roopa Prabhu <roopa@...ulusnetworks.com>,
Netdev <netdev@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [RFCv2 1/3] tcp: Use smaller mtu probes if RACK is enabled
On Wed, May 26, 2021 at 6:38 AM Leonard Crestez <cdleonard@...il.com> wrote:
>
> RACK allows detecting a loss in rtt + min_rtt / 4 based on just one
> extra packet. If enabled use this instead of relying of fast retransmit.
IMHO it would be worth adding some more text to motivate the change,
to justify the added complexity and risk from the change. The
substance of the change seems to be decreasing the requirement for
PMTU probing from needing roughly 5 packets worth of data to needing
roughly 3 packets worth of data. It's not clear to me as a reader of
this patch by itself that there are lots of applications that very
often only have 3-4 packets worth of data to send and yet can benefit
greatly from PMTU discovery.
> Suggested-by: Neal Cardwell <ncardwell@...gle.com>
> Signed-off-by: Leonard Crestez <cdleonard@...il.com>
> ---
> Documentation/networking/ip-sysctl.rst | 5 +++++
> include/net/netns/ipv4.h | 1 +
> net/ipv4/sysctl_net_ipv4.c | 7 +++++++
> net/ipv4/tcp_ipv4.c | 1 +
> net/ipv4/tcp_output.c | 26 +++++++++++++++++++++++++-
> 5 files changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
> index a5c250044500..7ab52a105a5d 100644
> --- a/Documentation/networking/ip-sysctl.rst
> +++ b/Documentation/networking/ip-sysctl.rst
> @@ -349,10 +349,15 @@ tcp_mtu_probe_floor - INTEGER
> If MTU probing is enabled this caps the minimum MSS used for search_low
> for the connection.
>
> Default : 48
>
> +tcp_mtu_probe_rack - BOOLEAN
> + Try to use shorter probes if RACK is also enabled
> +
> + Default: 1
I would vote to not have a sysctl for this. If we think it's a good
idea to allow MTU probing with a smaller amount of data if RACK is
enabled (which seems true to me), then this is a low-risk enough
change that we should just change the behavior.
> tcp_min_snd_mss - INTEGER
> TCP SYN and SYNACK messages usually advertise an ADVMSS option,
> as described in RFC 1122 and RFC 6691.
>
> If this ADVMSS option is smaller than tcp_min_snd_mss,
> diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h
> index 746c80cd4257..b4ff12f25a7f 100644
> --- a/include/net/netns/ipv4.h
> +++ b/include/net/netns/ipv4.h
> @@ -112,10 +112,11 @@ struct netns_ipv4 {
> #ifdef CONFIG_NET_L3_MASTER_DEV
> u8 sysctl_tcp_l3mdev_accept;
> #endif
> u8 sysctl_tcp_mtu_probing;
> int sysctl_tcp_mtu_probe_floor;
> + int sysctl_tcp_mtu_probe_rack;
> int sysctl_tcp_base_mss;
> int sysctl_tcp_min_snd_mss;
> int sysctl_tcp_probe_threshold;
> u32 sysctl_tcp_probe_interval;
>
> diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
> index 4fa77f182dcb..275c91fb9cf8 100644
> --- a/net/ipv4/sysctl_net_ipv4.c
> +++ b/net/ipv4/sysctl_net_ipv4.c
> @@ -847,10 +847,17 @@ static struct ctl_table ipv4_net_table[] = {
> .mode = 0644,
> .proc_handler = proc_dointvec_minmax,
> .extra1 = &tcp_min_snd_mss_min,
> .extra2 = &tcp_min_snd_mss_max,
> },
> + {
> + .procname = "tcp_mtu_probe_rack",
> + .data = &init_net.ipv4.sysctl_tcp_mtu_probe_rack,
> + .maxlen = sizeof(int),
> + .mode = 0644,
> + .proc_handler = proc_dointvec,
> + },
> {
> .procname = "tcp_probe_threshold",
> .data = &init_net.ipv4.sysctl_tcp_probe_threshold,
> .maxlen = sizeof(int),
> .mode = 0644,
> diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
> index 4f5b68a90be9..ed8af4a7325b 100644
> --- a/net/ipv4/tcp_ipv4.c
> +++ b/net/ipv4/tcp_ipv4.c
> @@ -2892,10 +2892,11 @@ static int __net_init tcp_sk_init(struct net *net)
> net->ipv4.sysctl_tcp_base_mss = TCP_BASE_MSS;
> net->ipv4.sysctl_tcp_min_snd_mss = TCP_MIN_SND_MSS;
> net->ipv4.sysctl_tcp_probe_threshold = TCP_PROBE_THRESHOLD;
> net->ipv4.sysctl_tcp_probe_interval = TCP_PROBE_INTERVAL;
> net->ipv4.sysctl_tcp_mtu_probe_floor = TCP_MIN_SND_MSS;
> + net->ipv4.sysctl_tcp_mtu_probe_rack = 1;
>
> net->ipv4.sysctl_tcp_keepalive_time = TCP_KEEPALIVE_TIME;
> net->ipv4.sysctl_tcp_keepalive_probes = TCP_KEEPALIVE_PROBES;
> net->ipv4.sysctl_tcp_keepalive_intvl = TCP_KEEPALIVE_INTVL;
>
> diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
> index bde781f46b41..9691f435477b 100644
> --- a/net/ipv4/tcp_output.c
> +++ b/net/ipv4/tcp_output.c
> @@ -2311,10 +2311,19 @@ static bool tcp_can_coalesce_send_queue_head(struct sock *sk, int len)
> }
>
> return true;
> }
>
> +/* Check if rack is supported for current connection */
> +static int tcp_mtu_probe_is_rack(const struct sock *sk)
> +{
> + struct net *net = sock_net(sk);
> +
> + return (net->ipv4.sysctl_tcp_recovery & TCP_RACK_LOSS_DETECTION &&
> + net->ipv4.sysctl_tcp_mtu_probe_rack);
> +}
You may want to use the existing helper, tcp_is_rack(), by moving it
to include/net/tcp.h
thanks,
neal
Powered by blists - more mailing lists