netdev - [PATCH v3 net-next 13/13] net: dsa: sja1105: plug in support for 2500base-x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210611200531.2384819-14-olteanv@gmail.com>
Date:   Fri, 11 Jun 2021 23:05:31 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc:     Wong Vee Khee <vee.khee.wong@...ux.intel.com>,
        Ong Boon Leong <boon.leong.ong@...el.com>,
        Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>,
        Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Jose Abreu <joabreu@...opsys.com>,
        Jose Abreu <Jose.Abreu@...opsys.com>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King - ARM Linux admin <linux@...linux.org.uk>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        linux-arm-kernel@...ts.infradead.org,
        linux-stm32@...md-mailman.stormreply.com,
        Vladimir Oltean <vladimir.oltean@....com>
Subject: [PATCH v3 net-next 13/13] net: dsa: sja1105: plug in support for 2500base-x

From: Vladimir Oltean <vladimir.oltean@....com>

The MAC treats 2500base-x same as SGMII (yay for that) except that it
must be set to a different speed.

Extend all places that check for SGMII to also check for 2500base-x.

Also add the missing 2500base-x compatibility matrix entry for SJA1110D.

Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
v2->v3: none
v1->v2:
- add the 2500base-x check in one place where it was missing (before
  mdio_device_create)
- remove it from a few places where it is no longer necessary now that
  we check more generically for the presence of priv->xpcs[port]

 drivers/net/dsa/sja1105/sja1105_main.c | 13 ++++++++++++-
 drivers/net/dsa/sja1105/sja1105_mdio.c |  3 ++-
 drivers/net/dsa/sja1105/sja1105_spi.c  |  2 ++
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 3e32b8676fa7..8e5cdf93c23b 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1056,6 +1056,9 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 	case SPEED_1000:
 		speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS];
 		break;
+	case SPEED_2500:
+		speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS];
+		break;
 	default:
 		dev_err(dev, "Invalid speed %iMbps\n", speed_mbps);
 		return -EINVAL;
@@ -1070,6 +1073,8 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 	 */
 	if (priv->phy_mode[port] == PHY_INTERFACE_MODE_SGMII)
 		mac[port].speed = priv->info->port_speed[SJA1105_SPEED_1000MBPS];
+	else if (priv->phy_mode[port] == PHY_INTERFACE_MODE_2500BASEX)
+		mac[port].speed = priv->info->port_speed[SJA1105_SPEED_2500MBPS];
 	else
 		mac[port].speed = speed;
 
@@ -1182,6 +1187,10 @@ static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
 	if (mii->xmii_mode[port] == XMII_MODE_RGMII ||
 	    mii->xmii_mode[port] == XMII_MODE_SGMII)
 		phylink_set(mask, 1000baseT_Full);
+	if (priv->info->supports_2500basex[port]) {
+		phylink_set(mask, 2500baseT_Full);
+		phylink_set(mask, 2500baseX_Full);
+	}
 
 	bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
 	bitmap_and(state->advertising, state->advertising, mask,
@@ -1942,7 +1951,9 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
 		if (!phylink_autoneg_inband(mode)) {
 			int speed = SPEED_UNKNOWN;
 
-			if (bmcr[i] & BMCR_SPEED1000)
+			if (priv->phy_mode[i] == PHY_INTERFACE_MODE_2500BASEX)
+				speed = SPEED_2500;
+			else if (bmcr[i] & BMCR_SPEED1000)
 				speed = SPEED_1000;
 			else if (bmcr[i] & BMCR_SPEED100)
 				speed = SPEED_100;
diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c
index 41468e51a38e..19aea8fb76f6 100644
--- a/drivers/net/dsa/sja1105/sja1105_mdio.c
+++ b/drivers/net/dsa/sja1105/sja1105_mdio.c
@@ -427,7 +427,8 @@ static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv)
 		if (dsa_is_unused_port(ds, port))
 			continue;
 
-		if (priv->phy_mode[port] != PHY_INTERFACE_MODE_SGMII)
+		if (priv->phy_mode[port] != PHY_INTERFACE_MODE_SGMII &&
+		    priv->phy_mode[port] != PHY_INTERFACE_MODE_2500BASEX)
 			continue;
 
 		mdiodev = mdio_device_create(bus, port);
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 96768af4c6a8..7c493c6a839d 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -967,6 +967,8 @@ const struct sja1105_info sja1110d_info = {
 				   false, false, false, false, false, false},
 	.supports_sgmii		= {false, true, true, true, true,
 				   false, false, false, false, false, false},
+	.supports_2500basex     = {false, false, false, true, true,
+				   false, false, false, false, false, false},
 	.internal_phy		= {SJA1105_NO_PHY, SJA1105_NO_PHY,
 				   SJA1105_NO_PHY, SJA1105_NO_PHY,
 				   SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
-- 
2.25.1