netdev - Re: [PATCH v2 net-next 2/3] net: phy: nxp-c45-tja11xx: fix potential RX timestamp wraparound

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20210614125937.GU22278@shell.armlinux.org.uk>
Date:   Mon, 14 Jun 2021 13:59:37 +0100
From:   "Russell King (Oracle)" <linux@...linux.org.uk>
To:     Vladimir Oltean <olteanv@...il.com>
Cc:     Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Radu Pirea <radu-nicolae.pirea@....nxp.com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Richard Cochran <richardcochran@...il.com>
Subject: Re: [PATCH v2 net-next 2/3] net: phy: nxp-c45-tja11xx: fix potential
 RX timestamp wraparound

On Mon, Jun 14, 2021 at 03:38:14PM +0300, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@....com>
> 
> The reconstruction procedure for partial timestamps reads the current
> PTP time and fills in the low 2 bits of the second portion, as well as
> the nanoseconds portion, from the actual hardware packet timestamp.
> Critically, the reconstruction procedure works because it assumes that
> the current PTP time is strictly larger than the hardware timestamp was:
> it detects a 2-bit wraparound of the 'seconds' portion by checking whether
> the 'seconds' portion of the partial hardware timestamp is larger than
> the 'seconds' portion of the current time. That can only happen if the
> hardware timestamp was captured by the PHY during the last phase of a
> 'modulo 4 seconds' interval, and the current PTP time was read by the
> driver during the initial phase of the next 'modulo 4 seconds' interval.
> 
> The partial RX timestamps are added to priv->rx_queue in
> nxp_c45_rxtstamp() and they are processed potentially in parallel by the
> aux worker thread in nxp_c45_do_aux_work(). This means that it is
> possible for nxp_c45_do_aux_work() to process more than one RX timestamp
> during the same schedule.
> 
> There is one premature optimization that will cause issues: for RX
> timestamping, the driver reads the current time only once, and it uses
> that to reconstruct all PTP RX timestamps in the queue. For the second
> and later timestamps, this will be an issue if we are processing two RX
> timestamps which are to the left and to the right, respectively, of a
> 4-bit wraparound of the 'seconds' portion of the PTP time, and the
> current PTP time is also pre-wraparound.
> 
>  0.000000000        4.000000000        8.000000000        12.000000000
>  |..................|..................|..................|............>
>                  ^ ^ ^ ^                                            time
>                  | | | |
>                  | | | process hwts 1 and hwts 2
>                  | | |
>                  | | hwts 2
>                  | |
>                  | read current PTP time
>                  |
>                  hwts 1
> 
> What will happen in that case is that hwts 2 (post-wraparound) will use
> a stale current PTP time that is pre-wraparound.
> But nxp_c45_reconstruct_ts will not detect this condition, because it is
> not coded up for it, so it will reconstruct hwts 2 with a current time
> from the previous 4 second interval (i.e. 0.something instead of
> 4.something).
> 
> This is solvable by making sure that the full 64-bit current time is
> always read after the PHY has taken the partial RX timestamp. We do this
> by reading the current PTP time for every timestamp in the RX queue.
> 
> Fixes: 514def5dd339 ("phy: nxp-c45-tja11xx: add timestamping support")
> Cc: Richard Cochran <richardcochran@...il.com>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> ---
> v1->v2: none
> 
>  drivers/net/phy/nxp-c45-tja11xx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
> index 902fe1aa7782..118b393b1cbb 100644
> --- a/drivers/net/phy/nxp-c45-tja11xx.c
> +++ b/drivers/net/phy/nxp-c45-tja11xx.c
> @@ -427,8 +427,8 @@ static long nxp_c45_do_aux_work(struct ptp_clock_info *ptp)
>  		nxp_c45_process_txts(priv, &hwts);
>  	}
>  
> -	nxp_c45_ptp_gettimex64(&priv->caps, &ts, NULL);
>  	while ((skb = skb_dequeue(&priv->rx_queue)) != NULL) {
> +		nxp_c45_ptp_gettimex64(&priv->caps, &ts, NULL);
>  		ts_raw = __be32_to_cpu(NXP_C45_SKB_CB(skb)->header->reserved2);
>  		hwts.sec = ts_raw >> 30;
>  		hwts.nsec = ts_raw & GENMASK(29, 0);

This looks good, but while reviewing it, I've been looking at
nxp_c45_reconstruct_ts(). While it is logically correct, this makes
it difficult to understand:

	if ((ts->tv_sec & TS_SEC_MASK) < (hwts->sec & TS_SEC_MASK))
		ts->tv_sec -= BIT(2);

The use of BIT() here seems completely inappropriate and misleading.

The value we really want to be using here is TS_SEC_MASK + 1 - this
has the advantage of making it completely clear that _this_ value
depends on TS_SEC_MASK, and is not some unrelated value.

In any case, for _this_ patch:

Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!