Message-ID: <20210819173626.GA1776@salvia>
Date:   Thu, 19 Aug 2021 19:36:26 +0200
From:   Pablo Neira Ayuso <pablo@...filter.org>
To:     netfilter <netfilter@...r.kernel.org>,
        netfilter-devel <netfilter-devel@...r.kernel.org>
Cc:     netdev@...r.kernel.org, netfilter-announce@...ts.netfilter.org,
        lwn@....net
Subject: [ANNOUNCE] nftables 1.0.0 release

Hi!

The Netfilter project proudly presents:

        nftables 1.0.0

This release contains fixes, documentation updates and new features
available up to the Linux kernel 5.13 release, more specifically:

* Catch-all set element support: This allows users to define the
  special wildcard set element for anything else not defined in
  the set.

  table x {
        map blocklist {
                type ipv4_addr : verdict
                flags interval
                elements = { 192.168.0.0/16 : accept, 10.0.0.0/8 : accept, * : drop }
        }

        chain y {
                type filter hook prerouting priority 0; policy accept;
                ip saddr vmap @blocklist
        }
  }

  [ this feature is actually supported since 0.9.9, but it was not
    included in the previous release announcement. ]

* Define variables from the command line through --define:

  # cat test.nft
  table netdev x {
        chain y {
               type filter hook ingress devices = $dev priority 0; policy drop;
        }
  }
  # nft --define dev="{ eth0, eth1 }" -f test.nft

* Allow to use stateful expressions in maps:

  table inet filter {
       map portmap {
               type inet_service : verdict
               counter
               elements = { 22 counter packets 0 bytes 0 : jump ssh_input, * counter packets 0 bytes 0 : drop }
       }

       chain ssh_input {
       }

       chain wan_input {
               tcp dport vmap @portmap
       }

       chain prerouting {
               type filter hook prerouting priority raw; policy accept;
               iif vmap { "lo" : jump wan_input }
       }
  }

* Add command to list the netfilter hooks pipeline for a given packet
  family. If device is specified, then ingress path is also included.

     # nft list hooks ip device eth0
     family ip {
            hook ingress {
                    +0000000010 chain netdev x y [nf_tables]
                    +0000000300 chain inet m w  [nf_tables]
            }
            hook input {
                    -0000000100 chain ip a b [nf_tables]
                    +0000000300 chain inet m z [nf_tables]
            }
            hook forward {
                    -0000000225 selinux_ipv4_forward
                     0000000000 chain ip a c [nf_tables]
            }
            hook output {
                    -0000000225 selinux_ipv4_output
            }
            hook postrouting {
                    +0000000225 selinux_ipv4_postroute
            }
     }

* Allow to combine jhash, symhash and numgen expressions with the
  queue statement, to fan out packets to userspace queues via
  nfnetlink_queue.

  ... queue to symhash mod 65536
  ... queue flags bypass to numgen inc mod 65536
  ... queue to jhash oif . meta mark mod 32

  You can also combine it with maps, to select the userspace queue
  based on any other singleton key or concatenations:

  ... queue flags bypass to oifname map { "eth0" : 0, "ppp0" : 2, "eth1" : 2 }

* Expand variable containing set into multiple mappings

  define interfaces = { eth0, eth1 }

  table ip x {
        chain y {
                type filter hook input priority 0; policy accept;
                iifname vmap { lo : accept, $interfaces : drop }
        }
 }
 # nft -f x.nft
 # nft list ruleset
 table ip x {
       chain y {
                type filter hook input priority 0; policy accept;
                iifname vmap { "lo" : accept, "eth0" : drop, "eth1" : drop }
        }
 }

* Allow to combine verdict maps with interval concatenations

 # nft add rule x y tcp dport . ip saddr vmap { 1025-65535 . 192.168.10.2 : accept }

* Simplify syntax for NAT mappings. You can specify an IP range:

 ... snat to ip saddr map { 10.141.11.4 : 192.168.2.2-192.168.2.4 }

 Or a specific IP and port.

 ... dnat to ip saddr map { 10.141.11.4 : 192.168.2.3 . 80 }

  Or a combination of range of IP addresses and ports.

 ... dnat to ip saddr . tcp dport map { 192.168.1.2 . 80 : 10.141.10.2-10.141.10.5 . 8888-8999 }

And bugfixes.

You can download this new release from:

https://www.netfilter.org/projects/nftables/downloads.html#nftables-0.9.9

To build the code, libnftnl >= 1.2.0 and libmnl >= 1.0.4 are required:

* https://netfilter.org/projects/libnftnl/index.html
* https://netfilter.org/projects/libmnl/index.html

Visit our wikipage for user documentation at:

* https://wiki.nftables.org

For the manpage reference, check man(8) nft.

In case of bugs and feature request, file them via:

* https://bugzilla.netfilter.org

Happy firewalling.

View attachment "changes-nftables-1.0.0.txt" of type "text/plain" (5838 bytes)

Powered by blists - more mailing lists