[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OS0PR01MB5922C47CEF890322ACB36C3B86A39@OS0PR01MB5922.jpnprd01.prod.outlook.com>
Date: Thu, 23 Sep 2021 11:41:19 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>
CC: Adam Ford <aford173@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Grygorii Strashko <grygorii.strashko@...com>,
"linux-renesas-soc@...r.kernel.org"
<linux-renesas-soc@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH 3/9] ARM: dts: renesas: Add compatible properties to
KSZ9031 Ethernet PHYs
Hi Geert,
Thanks for the patch. Tested the patch on iWave RZ/G1N board.
Tested-by: Biju Das <biju.das.jz@...renesas.com>
Regards,
Biju
> -----Original Message-----
> From: Geert Uytterhoeven <geert+renesas@...der.be>
> Sent: 09 September 2021 09:50
> To: Magnus Damm <magnus.damm@...il.com>
> Cc: Biju Das <biju.das.jz@...renesas.com>; Adam Ford <aford173@...il.com>;
> Florian Fainelli <f.fainelli@...il.com>; Andrew Lunn <andrew@...n.ch>;
> Heiner Kallweit <hkallweit1@...il.com>; Russell King
> <linux@...linux.org.uk>; Grygorii Strashko <grygorii.strashko@...com>;
> linux-renesas-soc@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> netdev@...r.kernel.org; devicetree@...r.kernel.org; Geert Uytterhoeven
> <geert+renesas@...der.be>
> Subject: [PATCH 3/9] ARM: dts: renesas: Add compatible properties to
> KSZ9031 Ethernet PHYs
>
> Add compatible values to Ethernet PHY subnodes representing Micrel
> KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
> model at any time, regardless of the state of the PHY reset line.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
> ---
> I could not verify the PHY revision number (least significant nibble of
> the ID), due to lack of hardware.
> ---
> arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 ++
> arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 2 ++
> arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 2 ++
> arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
> 4 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> index bc857676d19104a1..849034a49a3f98e2 100644
> --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
> @@ -158,6 +158,8 @@ &avb {
> status = "okay";
>
> phy3: ethernet-phy@3 {
> + compatible = "ethernet-phy-id0022.1622",
> + "ethernet-phy-ieee802.3-c22";
> reg = <3>;
> micrel,led-mode = <1>;
> };
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> index 94bf8a116b5242a9..a5a79cdbcd0ee09b 100644
> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
> @@ -175,6 +175,8 @@ &avb {
> status = "okay";
>
> phy3: ethernet-phy@3 {
> + compatible = "ethernet-phy-id0022.1622",
> + "ethernet-phy-ieee802.3-c22";
> reg = <3>;
> micrel,led-mode = <1>;
> };
> diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> index 73bd62d8a929e5da..c105932f642ea517 100644
> --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
> @@ -123,6 +123,8 @@ phy3: ethernet-phy@3 {
> * On some older versions of the platform (before R4.0) the phy
> address
> * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
> */
> + compatible = "ethernet-phy-id0022.1622",
> + "ethernet-phy-ieee802.3-c22";
> reg = <3>;
> micrel,led-mode = <1>;
> };
> diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
> b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
> index 8ac61b50aec03190..b024621c998103b2 100644
> --- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
> +++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
> @@ -79,6 +79,8 @@ &avb {
> status = "okay";
>
> phy3: ethernet-phy@3 {
> + compatible = "ethernet-phy-id0022.1622",
> + "ethernet-phy-ieee802.3-c22";
> reg = <3>;
> interrupt-parent = <&gpio5>;
> interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> --
> 2.25.1
Powered by blists - more mailing lists