[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DB8PR04MB5785F3128FEB1FB1B2F9AC0DF0A99@DB8PR04MB5785.eurprd04.prod.outlook.com>
Date: Wed, 29 Sep 2021 10:25:58 +0000
From: Xiaoliang Yang <xiaoliang.yang_1@....com>
To: Vinicius Costa Gomes <vinicius.gomes@...el.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: "Arvid.Brodin@...n.com" <Arvid.Brodin@...n.com>,
"m-karicheri2@...com" <m-karicheri2@...com>,
"michael.chan@...adcom.com" <michael.chan@...adcom.com>,
"vishal@...lsio.com" <vishal@...lsio.com>,
"saeedm@...lanox.com" <saeedm@...lanox.com>,
"jiri@...lanox.com" <jiri@...lanox.com>,
"idosch@...lanox.com" <idosch@...lanox.com>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"ivan.khoronzhuk@...aro.org" <ivan.khoronzhuk@...aro.org>,
"andre.guedes@...ux.intel.com" <andre.guedes@...ux.intel.com>,
"allan.nielsen@...rochip.com" <allan.nielsen@...rochip.com>,
"joergen.andreasen@...rochip.com" <joergen.andreasen@...rochip.com>,
Vladimir Oltean <vladimir.oltean@....com>,
"jhs@...atatu.com" <jhs@...atatu.com>
Subject: RE: [EXT] Re: [RFC, net-next] net: qos: introduce a frer action to
implement 802.1CB
Hi Vinicius,
On Sep 29, 2021 at 6:35:59 +0000, Vinicius Costa Gomes wrote:
> > This patch introduce a frer action to implement frame replication and
> > elimination for reliability, which is defined in IEEE P802.1CB.
> >
>
> An action seems, to me, a bit too limiting/fine grained for a frame replication
> and elimination feature.
>
> At least I want to hear the reasons that the current hsr/prp support cannot be
> extended to support one more tag format/protocol.
>
> And the current name for the spec is IEEE 802.1CB-2017.
>
802.1CB can be set on bridge ports, and need to use bridge forward
Function as a relay system. It only works on identified streams,
unrecognized flows still need to pass through the bridged network
normally.
But current hsr/prp seems only support two ports, and cannot use the
ports in bridge. It's hard to implement FRER functions on current HSR
driver.
You can see chapter "D.2 Example 2: Various stack positions" in IEEE 802.1CB-2017,
Protocol stack for relay system is like follows:
Stream Transfer Function
| |
| Sequence generation
| Sequence encode/decode
Stream identification Active Stream identification
| |
| Internal LAN---- Relay system forwarding
| | |
MAC MAC MAC
Use port actions to easily implement FRER tag add/delete, split, and
recover functions.
Current HSR/PRP driver can be used for port HSR/PRP set, and tc-frer
Action to be used for stream RTAG/HSR/PRP set and recover.
Thanks,
Xiaoliang
Powered by blists - more mailing lists