[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211001161710.2sdz6o6lh3yg7k6p@skbuf>
Date: Fri, 1 Oct 2021 16:17:11 +0000
From: Vladimir Oltean <vladimir.oltean@....com>
To: Xiaoliang Yang <xiaoliang.yang_1@....com>
CC: Vinicius Costa Gomes <vinicius.gomes@...el.com>,
"davem@...emloft.net" <davem@...emloft.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Arvid.Brodin@...n.com" <Arvid.Brodin@...n.com>,
"m-karicheri2@...com" <m-karicheri2@...com>,
"michael.chan@...adcom.com" <michael.chan@...adcom.com>,
"vishal@...lsio.com" <vishal@...lsio.com>,
"saeedm@...lanox.com" <saeedm@...lanox.com>,
"jiri@...lanox.com" <jiri@...lanox.com>,
"idosch@...lanox.com" <idosch@...lanox.com>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"ivan.khoronzhuk@...aro.org" <ivan.khoronzhuk@...aro.org>,
"andre.guedes@...ux.intel.com" <andre.guedes@...ux.intel.com>,
"allan.nielsen@...rochip.com" <allan.nielsen@...rochip.com>,
"joergen.andreasen@...rochip.com" <joergen.andreasen@...rochip.com>,
"jhs@...atatu.com" <jhs@...atatu.com>
Subject: Re: [EXT] Re: [RFC, net-next] net: qos: introduce a frer action to
implement 802.1CB
Hi Vinicius,
On Wed, Sep 29, 2021 at 10:25:58AM +0000, Xiaoliang Yang wrote:
> Hi Vinicius,
>
> On Sep 29, 2021 at 6:35:59 +0000, Vinicius Costa Gomes wrote:
> > > This patch introduce a frer action to implement frame replication and
> > > elimination for reliability, which is defined in IEEE P802.1CB.
> > >
> >
> > An action seems, to me, a bit too limiting/fine grained for a frame replication
> > and elimination feature.
> >
> > At least I want to hear the reasons that the current hsr/prp support cannot be
> > extended to support one more tag format/protocol.
> >
> > And the current name for the spec is IEEE 802.1CB-2017.
> >
> 802.1CB can be set on bridge ports, and need to use bridge forward
> Function as a relay system. It only works on identified streams,
> unrecognized flows still need to pass through the bridged network
> normally.
>
> But current hsr/prp seems only support two ports, and cannot use the
> ports in bridge. It's hard to implement FRER functions on current HSR
> driver.
>
> You can see chapter "D.2 Example 2: Various stack positions" in IEEE 802.1CB-2017,
> Protocol stack for relay system is like follows:
>
> Stream Transfer Function
> | |
> | Sequence generation
> | Sequence encode/decode
> Stream identification Active Stream identification
> | |
> | Internal LAN---- Relay system forwarding
> | | |
> MAC MAC MAC
>
> Use port actions to easily implement FRER tag add/delete, split, and
> recover functions.
>
> Current HSR/PRP driver can be used for port HSR/PRP set, and tc-frer
> Action to be used for stream RTAG/HSR/PRP set and recover.
Did Xiaoliang answer your question satisfactorily? :)
Powered by blists - more mailing lists