netdev - [PATCH net-next v2] ixgbe: Consider xsk pool's frame size for MTU size

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210930140651.2249972-1-bigeasy@linutronix.de>
Date:   Thu, 30 Sep 2021 16:06:51 +0200
From:   Sebastian Andrzej Siewior <bigeasy@...utronix.de>
To:     intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org
Cc:     Jesse Brandeburg <jesse.brandeburg@...el.com>,
        Tony Nguyen <anthony.l.nguyen@...el.com>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Kurt Kanzenbach <kurt@...utronix.de>,
        Thomas Gleixner <tglx@...utronix.de>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Subject: [PATCH net-next v2] ixgbe: Consider xsk pool's frame size for MTU size

The driver has to a ensure that a network packet is not using more than
one page for its data if a XDP program is used.
This results in an upper limit of 1500 bytes. This can be increased a
little if the MTU was programmed to 1514..3072 bytes before loading the
XDP program. By setting this increased MTU size the driver will set the
__IXGBE_RX_3K_BUFFER flag which in turn will allow to use 3KiB as the
upper limit.
This looks like a hack and the upper limit is could increased further.
If the user configured a memory pool then PAGE_SIZE is used as BSIZEPKT
and RLPML is set to pool's memory size as is the card's maximum frame
size.
The result is that a MTU of 3520 bytes can be programmed and every
packet is stored a single page.

If a RX ring has a pool assigned use its size while comparing for the
maximal MTU size.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
---
v1…v2: Remove RFC. Repost of
	https://lore.kernel.org/r/20210622162616.eadk2u5hmf4ru5jd@linutronix.de

 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 21 +++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 24e06ba6f5e93..ed451f32e1980 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6722,6 +6722,23 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
 			ixgbe_free_rx_resources(adapter->rx_ring[i]);
 }
 
+static int ixgbe_validate_frame_size(unsigned int frame_size,
+				     struct ixgbe_ring *ring)
+{
+	struct xsk_buff_pool *xsk_pool;
+	unsigned int buf_len;
+
+	xsk_pool = ring->xsk_pool;
+	if (xsk_pool)
+		buf_len = xsk_pool_get_rx_frame_size(xsk_pool);
+	else
+		buf_len = ixgbe_rx_bufsz(ring);
+
+	if (frame_size > buf_len)
+		return -EINVAL;
+	return 0;
+}
+
 /**
  * ixgbe_change_mtu - Change the Maximum Transfer Unit
  * @netdev: network interface device structure
@@ -6741,7 +6758,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			struct ixgbe_ring *ring = adapter->rx_ring[i];
 
-			if (new_frame_size > ixgbe_rx_bufsz(ring)) {
+			if (ixgbe_validate_frame_size(new_frame_size, ring)) {
 				e_warn(probe, "Requested MTU size is not supported with XDP\n");
 				return -EINVAL;
 			}
@@ -10126,7 +10143,7 @@ static int ixgbe_xdp_setup(struct net_device *dev, struct bpf_prog *prog)
 		if (ring_is_rsc_enabled(ring))
 			return -EINVAL;
 
-		if (frame_size > ixgbe_rx_bufsz(ring))
+		if (ixgbe_validate_frame_size(frame_size, ring))
 			return -EINVAL;
 	}
 
-- 
2.33.0