| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220108131838.12321-1-paskripkin@gmail.com>
Date: Sat, 8 Jan 2022 16:18:38 +0300
From: Pavel Skripkin <paskripkin@...il.com>
To: stefan@...enfreihafen.org, alex.aring@...il.com,
davem@...emloft.net, kuba@...nel.org
Cc: linux-wpan@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Pavel Skripkin <paskripkin@...il.com>
Subject: [PATCH -next v2] ieee802154: atusb: move to new USB API
Old USB API is prone to uninit value bugs if error handling is not
correct. Let's move atusb to use new USB API to
1) Make code more simple, since new API does not require memory
to be allocates via kmalloc()
2) Defend driver from usb-related uninit value bugs.
3) Make code more modern and simple
This patch removes atusb usb wrappers as Greg suggested [0], this will make
code more obvious and easier to understand over time, and replaces old
API calls with new ones.
Also this patch adds and updates usb related error handling to prevent
possible uninit value bugs in future
Link: https://lore.kernel.org/all/YdL0GPxy4TdGDzOO@kroah.com/ [0]
Signed-off-by: Pavel Skripkin <paskripkin@...il.com>
---
Changes in v2:
- Fixed logic bug in atusb_get_and_conf_chip()
- Renamed rc variable to reg in atusb_read_subreg()
---
drivers/net/ieee802154/atusb.c | 186 ++++++++++++---------------------
1 file changed, 67 insertions(+), 119 deletions(-)
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 2f5e7b31032a..07bafbf94680 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -74,81 +74,6 @@ struct atusb_chip_data {
int (*set_txpower)(struct ieee802154_hw*, s32);
};
-/* ----- USB commands without data ----------------------------------------- */
-
-/* To reduce the number of error checks in the code, we record the first error
- * in atusb->err and reject all subsequent requests until the error is cleared.
- */
-
-static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
- __u8 request, __u8 requesttype,
- __u16 value, __u16 index,
- void *data, __u16 size, int timeout)
-{
- struct usb_device *usb_dev = atusb->usb_dev;
- int ret;
-
- if (atusb->err)
- return atusb->err;
-
- ret = usb_control_msg(usb_dev, pipe, request, requesttype,
- value, index, data, size, timeout);
- if (ret < size) {
- ret = ret < 0 ? ret : -ENODATA;
-
- atusb->err = ret;
- dev_err(&usb_dev->dev,
- "%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
- __func__, request, value, index, ret);
- }
- return ret;
-}
-
-static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
-{
- struct usb_device *usb_dev = atusb->usb_dev;
-
- dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
- return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
- cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
-}
-
-static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
-{
- struct usb_device *usb_dev = atusb->usb_dev;
-
- dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
- return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
- ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
- value, reg, NULL, 0, 1000);
-}
-
-static int atusb_read_reg(struct atusb *atusb, u8 reg)
-{
- struct usb_device *usb_dev = atusb->usb_dev;
- int ret;
- u8 *buffer;
- u8 value;
-
- buffer = kmalloc(1, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- dev_dbg(&usb_dev->dev, "%s: reg = 0x%x\n", __func__, reg);
- ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
- ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
- 0, reg, buffer, 1, 1000);
-
- if (ret >= 0) {
- value = buffer[0];
- kfree(buffer);
- return value;
- } else {
- kfree(buffer);
- return ret;
- }
-}
-
static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
u8 shift, u8 value)
{
@@ -158,7 +83,10 @@ static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
- orig = atusb_read_reg(atusb, reg);
+ ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, reg, &orig, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
/* Write the value only into that part of the register which is allowed
* by the mask. All other bits stay as before.
@@ -167,7 +95,8 @@ static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
tmp |= (value << shift) & mask;
if (tmp != orig)
- ret = atusb_write_reg(atusb, reg, tmp);
+ ret = usb_control_msg_send(usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ tmp, reg, NULL, 0, 1000, GFP_KERNEL);
return ret;
}
@@ -176,12 +105,16 @@ static int atusb_read_subreg(struct atusb *lp,
unsigned int addr, unsigned int mask,
unsigned int shift)
{
- int rc;
+ int reg, ret;
+
+ ret = usb_control_msg_recv(lp->usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, addr, ®, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
- rc = atusb_read_reg(lp, addr);
- rc = (rc & mask) >> shift;
+ reg = (reg & mask) >> shift;
- return rc;
+ return reg;
}
static int atusb_get_and_clear_error(struct atusb *atusb)
@@ -419,16 +352,22 @@ static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
u16 addr = le16_to_cpu(filt->short_addr);
dev_vdbg(dev, "%s called for saddr\n", __func__);
- atusb_write_reg(atusb, RG_SHORT_ADDR_0, addr);
- atusb_write_reg(atusb, RG_SHORT_ADDR_1, addr >> 8);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ addr, RG_SHORT_ADDR_0, NULL, 0, 1000, GFP_KERNEL);
+
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ addr >> 8, RG_SHORT_ADDR_1, NULL, 0, 1000, GFP_KERNEL);
}
if (changed & IEEE802154_AFILT_PANID_CHANGED) {
u16 pan = le16_to_cpu(filt->pan_id);
dev_vdbg(dev, "%s called for pan id\n", __func__);
- atusb_write_reg(atusb, RG_PAN_ID_0, pan);
- atusb_write_reg(atusb, RG_PAN_ID_1, pan >> 8);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ pan, RG_PAN_ID_0, NULL, 0, 1000, GFP_KERNEL);
+
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ pan >> 8, RG_PAN_ID_1, NULL, 0, 1000, GFP_KERNEL);
}
if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
@@ -437,7 +376,9 @@ static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
dev_vdbg(dev, "%s called for IEEE addr\n", __func__);
for (i = 0; i < 8; i++)
- atusb_write_reg(atusb, RG_IEEE_ADDR_0 + i, addr[i]);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ addr[i], RG_IEEE_ADDR_0 + i, NULL, 0,
+ 1000, GFP_KERNEL);
}
if (changed & IEEE802154_AFILT_PANC_CHANGED) {
@@ -459,7 +400,8 @@ static int atusb_start(struct ieee802154_hw *hw)
dev_dbg(&usb_dev->dev, "%s\n", __func__);
schedule_delayed_work(&atusb->work, 0);
- atusb_command(atusb, ATUSB_RX_MODE, 1);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 1, 0,
+ NULL, 0, 1000, GFP_KERNEL);
ret = atusb_get_and_clear_error(atusb);
if (ret < 0)
usb_kill_anchored_urbs(&atusb->idle_urbs);
@@ -473,7 +415,8 @@ static void atusb_stop(struct ieee802154_hw *hw)
dev_dbg(&usb_dev->dev, "%s\n", __func__);
usb_kill_anchored_urbs(&atusb->idle_urbs);
- atusb_command(atusb, ATUSB_RX_MODE, 0);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 0, 0,
+ NULL, 0, 1000, GFP_KERNEL);
atusb_get_and_clear_error(atusb);
}
@@ -580,9 +523,11 @@ atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
{
- unsigned int cca_ed_thres;
+ int cca_ed_thres;
cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
+ if (cca_ed_thres < 0)
+ return cca_ed_thres;
switch (rssi_base_val) {
case -98:
@@ -799,18 +744,13 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
{
struct usb_device *usb_dev = atusb->usb_dev;
char *hw_name;
- unsigned char *buffer;
+ unsigned char buffer[3];
int ret;
- buffer = kmalloc(3, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
/* Get a couple of the ATMega Firmware values */
- ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
- ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
- buffer, 3, 1000);
- if (ret >= 0) {
+ ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+ buffer, 3, 1000, GFP_KERNEL);
+ if (!ret) {
atusb->fw_ver_maj = buffer[0];
atusb->fw_ver_min = buffer[1];
atusb->fw_hw_type = buffer[2];
@@ -849,7 +789,6 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
}
- kfree(buffer);
return ret;
}
@@ -863,7 +802,6 @@ static int atusb_get_and_show_build(struct atusb *atusb)
if (!build)
return -ENOMEM;
- /* We cannot call atusb_control_msg() here, since this request may read various length data */
ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
if (ret >= 0) {
@@ -881,14 +819,27 @@ static int atusb_get_and_conf_chip(struct atusb *atusb)
u8 man_id_0, man_id_1, part_num, version_num;
const char *chip;
struct ieee802154_hw *hw = atusb->hw;
+ int ret;
- man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
- man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
- part_num = atusb_read_reg(atusb, RG_PART_NUM);
- version_num = atusb_read_reg(atusb, RG_VERSION_NUM);
+ ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, RG_MAN_ID_0, &man_id_0, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
- if (atusb->err)
- return atusb->err;
+ ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, RG_MAN_ID_1, &man_id_1, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, RG_PART_NUM, &part_num, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+ 0, RG_VERSION_NUM, &version_num, 1, 1000, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
@@ -969,7 +920,7 @@ static int atusb_get_and_conf_chip(struct atusb *atusb)
static int atusb_set_extended_addr(struct atusb *atusb)
{
struct usb_device *usb_dev = atusb->usb_dev;
- unsigned char *buffer;
+ unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN];
__le64 extended_addr;
u64 addr;
int ret;
@@ -982,18 +933,12 @@ static int atusb_set_extended_addr(struct atusb *atusb)
return 0;
}
- buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
/* Firmware is new enough so we fetch the address from EEPROM */
- ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
- ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
- buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
+ ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+ buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000, GFP_KERNEL);
if (ret < 0) {
dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
- kfree(buffer);
return ret;
}
@@ -1009,7 +954,6 @@ static int atusb_set_extended_addr(struct atusb *atusb)
&addr);
}
- kfree(buffer);
return ret;
}
@@ -1051,7 +995,8 @@ static int atusb_probe(struct usb_interface *interface,
hw->parent = &usb_dev->dev;
- atusb_command(atusb, ATUSB_RF_RESET, 0);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RF_RESET, ATUSB_REQ_TO_DEV, 0, 0,
+ NULL, 0, 1000, GFP_KERNEL);
atusb_get_and_conf_chip(atusb);
atusb_get_and_show_revision(atusb);
atusb_get_and_show_build(atusb);
@@ -1076,7 +1021,9 @@ static int atusb_probe(struct usb_interface *interface,
* explicitly. Any resets after that will send us straight to TRX_OFF,
* making the command below redundant.
*/
- atusb_write_reg(atusb, RG_TRX_STATE, STATE_FORCE_TRX_OFF);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ STATE_FORCE_TRX_OFF, RG_TRX_STATE, NULL, 0, 1000, GFP_KERNEL);
+
msleep(1); /* reset => TRX_OFF, tTR13 = 37 us */
#if 0
@@ -1104,7 +1051,8 @@ static int atusb_probe(struct usb_interface *interface,
atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
#endif
- atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
+ usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+ 0xff, RG_IRQ_MASK, NULL, 0, 1000, GFP_KERNEL);
ret = atusb_get_and_clear_error(atusb);
if (!ret)
--
2.34.1
Powered by blists - more mailing lists