[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YeF18mxKuO4/4G0V@lunn.ch>
Date: Fri, 14 Jan 2022 14:09:06 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: peppe.cavallaro@...com, alexandre.torgue@...s.st.com,
joabreu@...opsys.com, "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Marek Behún <kabel@...nel.org>,
Ivan Bornyakov <i.bornyakov@...rotek.ru>,
Pali Rohár <pali@...nel.org>,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] stmmac: intel: Honor phy LED set by system firmware
on a Dell hardware
On Fri, Jan 14, 2022 at 12:07:54PM +0800, Kai-Heng Feng wrote:
> BIOS on Dell Edge Gateway 3200 already makes its own phy LED setting, so
> instead of setting another value, keep it untouched and restore the saved
> value on system resume.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 16 +++++
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++
> drivers/net/phy/marvell.c | 58 ++++++++++++-------
> include/linux/marvell_phy.h | 1 +
> 5 files changed, 61 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index 8e8778cfbbadd..f8a2879e0264a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -857,6 +857,16 @@ static const struct dmi_system_id quark_pci_dmi[] = {
> {}
> };
>
> +static const struct dmi_system_id use_preset_led[] = {
> + {
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell EMC"),
> + DMI_MATCH(DMI_PRODUCT_NAME, "Edge Gateway 3200"),
> + },
> + },
> + {}
> +};
This is a PHY property. Why is the MAC involved?
Please also think about how to make this generic, so any ACPI based
system can use it, with any PHY.
Andrew
Powered by blists - more mailing lists