netdev - Re: [PATCH net-next 2/2] net: dsa: realtek: rtl8365mb: add support for rtl8

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220209215712.tqytk6nosui7b2iu@skbuf>
Date:   Wed, 9 Feb 2022 23:57:12 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     Luiz Angelo Daros de Luca <luizluca@...il.com>
Cc:     netdev@...r.kernel.org, linus.walleij@...aro.org, andrew@...n.ch,
        vivien.didelot@...il.com, f.fainelli@...il.com,
        davem@...emloft.net, kuba@...nel.org, alsi@...g-olufsen.dk,
        arinc.unal@...nc9.com
Subject: Re: [PATCH net-next 2/2] net: dsa: realtek: rtl8365mb: add support
 for rtl8_4t

On Wed, Feb 09, 2022 at 06:13:12PM -0300, Luiz Angelo Daros de Luca wrote:
> The tailing tag is also supported by this family. The default is still
> rtl8_4 but now the switch supports changing the tag to rtl8_4t.
> 
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@...il.com>
> ---
>  drivers/net/dsa/realtek/rtl8365mb.c | 63 +++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
> index e0c7f64bc56f..02d1521887ae 100644
> --- a/drivers/net/dsa/realtek/rtl8365mb.c
> +++ b/drivers/net/dsa/realtek/rtl8365mb.c
> @@ -853,9 +853,70 @@ static enum dsa_tag_protocol
>  rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port,
>  			   enum dsa_tag_protocol mp)
>  {
> +	struct realtek_priv *priv = ds->priv;
> +	u32 val;
> +
> +	/* No way to return error */
> +	regmap_read(priv->map, RTL8365MB_CPU_CTRL_REG, &val);
> +
> +	switch (FIELD_GET(RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK, val)) {
> +	case RTL8365MB_CPU_FORMAT_4BYTES:
> +		/* Similar to DSA_TAG_PROTO_RTL4_A but with 1-byte version
> +		 * To CPU: [0x88 0x99 0x04 portnum]. Not supported yet.
> +		 */
> +		break;
> +	case RTL8365MB_CPU_FORMAT_8BYTES:
> +		switch (FIELD_GET(RTL8365MB_CPU_CTRL_TAG_POSITION_MASK, val)) {
> +		case RTL8365MB_CPU_POS_BEFORE_CRC:
> +			return DSA_TAG_PROTO_RTL8_4T;
> +		case RTL8365MB_CPU_POS_AFTER_SA:
> +		default:
> +			return DSA_TAG_PROTO_RTL8_4;
> +		}
> +		break;
> +	}
> +
>  	return DSA_TAG_PROTO_RTL8_4;

Not great. dsa_get_tag_protocol gets called from dsa_port_parse_cpu,
which is earlier than rtl8365mb_cpu_config, so you may temporarily
report a tagging protocol which you don't expect (depending on what is
in hardware at the time). Can you not keep the current tagging protocol
in a variable? You could then avoid the need to return an error on
regmap_read too.

>  }
>  
> +static int rtl8365mb_change_tag_protocol(struct dsa_switch *ds, int cpu,
> +					 enum dsa_tag_protocol proto)
> +{
> +	struct realtek_priv *priv = ds->priv;
> +	int tag_position;
> +	int tag_format;
> +	int ret;
> +
> +	switch (proto) {
> +	case DSA_TAG_PROTO_RTL8_4:
> +		tag_format = RTL8365MB_CPU_FORMAT_8BYTES;
> +		tag_position = RTL8365MB_CPU_POS_AFTER_SA;
> +		break;
> +	case DSA_TAG_PROTO_RTL8_4T:
> +		tag_format = RTL8365MB_CPU_FORMAT_8BYTES;
> +		tag_position = RTL8365MB_CPU_POS_BEFORE_CRC;
> +		break;
> +	/* The switch also supports a 4-byte format, similar to rtl4a but with
> +	 * the same 0x04 8-bit version and probably 8-bit port source/dest.
> +	 * There is no public doc about it. Not supported yet.
> +	 */
> +	default:
> +		return -EPROTONOSUPPORT;
> +	}
> +
> +	ret = regmap_update_bits(priv->map, RTL8365MB_CPU_CTRL_REG,
> +				 RTL8365MB_CPU_CTRL_TAG_POSITION_MASK |
> +				 RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK,
> +				 FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_POSITION_MASK,
> +					    tag_position) |
> +				 FIELD_PREP(RTL8365MB_CPU_CTRL_TAG_FORMAT_MASK,
> +					    tag_format));
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
>  static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port,
>  				      phy_interface_t interface)
>  {
> @@ -2079,6 +2140,7 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
>  
>  static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
>  	.get_tag_protocol = rtl8365mb_get_tag_protocol,
> +	.change_tag_protocol = rtl8365mb_change_tag_protocol,
>  	.setup = rtl8365mb_setup,
>  	.teardown = rtl8365mb_teardown,
>  	.phylink_get_caps = rtl8365mb_phylink_get_caps,
> @@ -2097,6 +2159,7 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
>  
>  static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
>  	.get_tag_protocol = rtl8365mb_get_tag_protocol,
> +	.change_tag_protocol = rtl8365mb_change_tag_protocol,
>  	.setup = rtl8365mb_setup,
>  	.teardown = rtl8365mb_teardown,
>  	.phylink_get_caps = rtl8365mb_phylink_get_caps,
> -- 
> 2.35.1
>