[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220215152233.2c15de26@hermes.local>
Date: Tue, 15 Feb 2022 15:22:33 -0800
From: Stephen Hemminger <stephen@...workplumber.org>
To: netdev@...r.kernel.org
Subject: Fw: [Bug 215610] New: eth0 not working after upgrade from 5.16.8 to
5.16.9
Begin forwarded message:
Date: Tue, 15 Feb 2022 16:24:06 +0000
From: bugzilla-daemon@...nel.org
To: stephen@...workplumber.org
Subject: [Bug 215610] New: eth0 not working after upgrade from 5.16.8 to 5.16.9
https://bugzilla.kernel.org/show_bug.cgi?id=215610
Bug ID: 215610
Summary: eth0 not working after upgrade from 5.16.8 to 5.16.9
Product: Networking
Version: 2.5
Kernel Version: 5.16.9
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: stephen@...workplumber.org
Reporter: joerg.sigle@...gle.com
Regression: No
After rebooting with kernel 5.16.9, the eth0 connection did not work any more.
The interface is shown in ifconfig, but ping or other services don't reach any
machines in the LAN or in the internet.
I've not done much research but went back to 5.16.8 which works well again.
In 5.16.8, lspci shows:
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev
04)
Subsystem: Lenovo Ethernet Connection I217-LM
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at b4a00000 (32-bit, non-prefetchable) [size=128K]
Memory at b4a3e000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 5080 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
Kind regards, js
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are the assignee for the bug.
Powered by blists - more mailing lists