netdev - Re: [PATCH v2 net] net: mdio: don't defer probe forever if PHY IRQ provider is missing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Yk8ZuSlhPJtAD9qi@kroah.com>
Date:   Thu, 7 Apr 2022 19:04:57 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Vladimir Oltean <vladimir.oltean@....com>
Cc:     netdev@...r.kernel.org, Paolo Abeni <pabeni@...hat.com>,
        Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Florian Fainelli <f.fainelli@...il.com>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Saravana Kannan <saravanak@...gle.com>,
        Rob Herring <robh@...nel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Robin Murphy <robin.murphy@....com>
Subject: Re: [PATCH v2 net] net: mdio: don't defer probe forever if PHY IRQ
 provider is missing

On Thu, Apr 07, 2022 at 07:55:38PM +0300, Vladimir Oltean wrote:
> When a driver for an interrupt controller is missing, of_irq_get()
> returns -EPROBE_DEFER ad infinitum, causing
> fwnode_mdiobus_phy_device_register(), and ultimately, the entire
> of_mdiobus_register() call, to fail. In turn, any phy_connect() call
> towards a PHY on this MDIO bus will also fail.
> 
> This is not what is expected to happen, because the PHY library falls
> back to poll mode when of_irq_get() returns a hard error code, and the
> MDIO bus, PHY and attached Ethernet controller work fine, albeit
> suboptimally, when the PHY library polls for link status. However,
> -EPROBE_DEFER has special handling given the assumption that at some
> point probe deferral will stop, and the driver for the supplier will
> kick in and create the IRQ domain.
> 
> Reasons for which the interrupt controller may be missing:
> 
> - It is not yet written. This may happen if a more recent DT blob (with
>   an interrupt-parent for the PHY) is used to boot an old kernel where
>   the driver didn't exist, and that kernel worked with the
>   vintage-correct DT blob using poll mode.
> 
> - It is compiled out. Behavior is the same as above.
> 
> - It is compiled as a module. The kernel will wait for a number of
>   seconds specified in the "deferred_probe_timeout" boot parameter for
>   user space to load the required module. The current default is 0,
>   which times out at the end of initcalls. It is possible that this
>   might cause regressions unless users adjust this boot parameter.
> 
> The proposed solution is to use the driver_deferred_probe_check_state()
> helper function provided by the driver core, which gives up after some
> -EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration.
> The return code is changed from -EPROBE_DEFER into -ENODEV or
> -ETIMEDOUT, depending on whether the kernel is compiled with support for
> modules or not.
> 
> Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
> Suggested-by: Robin Murphy <robin.murphy@....com>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> ---
> v1->v2: export driver_deferred_probe_check_state, add driver core
>         maintainers

Acked-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>