netdev - [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220803153300.58732-1-sebastian.wuerl@ororatech.com>
Date:   Wed,  3 Aug 2022 17:32:59 +0200
From:   Sebastian Würl <sebastian.wuerl@...ratech.com>
To:     sebastian.wuerl@...ratech.com
Cc:     Wolfgang Grandegger <wg@...ndegger.com>,
        Marc Kleine-Budde <mkl@...gutronix.de>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Vincent Mailhol <mailhol.vincent@...adoo.fr>,
        Stefan Mätje <stefan.maetje@....eu>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Oliver Hartkopp <socketcan@...tkopp.net>,
        Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>, linux-can@...r.kernel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] drivers/net/can/spi/mcp251x.c: Fix race condition on receive interrupt

The mcp251x driver uses both receiving mailboxes of the can controller
chips. For retrieving the CAN frames from the controller via SPI, it checks
once per interrupt which mailboxes have been filled, an will retrieve the
messages accordingly.

This introduces a race condition, as another CAN frame can enter mailbox 1
while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until
the interrupt handler is called next, mailbox 0 is emptied before
mailbox 1, leading to out-of-order CAN frames in the network device.

This is fixed by checking the interrupt flags once again after freeing
mailbox 0, to correctly also empty mailbox 1 before leaving the handler.

For reproducing the bug I created the following setup:
 - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any.
 - Setup CAN to 1 MHz
 - Spam bursts of 5 CAN-messages with increasing CAN-ids
 - Continue sending the bursts while sleeping a second between the bursts
 - Check on the RPi whether the received messages have increasing CAN-ids
 - Without this patch, every burst of messages will contain a flipped pair

Signed-off-by: Sebastian Würl <sebastian.wuerl@...ratech.com>
---
 drivers/net/can/spi/mcp251x.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index 666a4505a55a..687aafef4717 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -1063,17 +1063,14 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 	mutex_lock(&priv->mcp_lock);
 	while (!priv->force_quit) {
 		enum can_state new_state;
-		u8 intf, eflag;
+		u8 intf, intf0, intf1, eflag, eflag0, eflag1;
 		u8 clear_intf = 0;
 		int can_id = 0, data1 = 0;
 
-		mcp251x_read_2regs(spi, CANINTF, &intf, &eflag);
-
-		/* mask out flags we don't care about */
-		intf &= CANINTF_RX | CANINTF_TX | CANINTF_ERR;
+		mcp251x_read_2regs(spi, CANINTF, &intf0, &eflag0);
 
 		/* receive buffer 0 */
-		if (intf & CANINTF_RX0IF) {
+		if (intf0 & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
 			/* Free one buffer ASAP
 			 * (The MCP2515/25625 does this automatically.)
@@ -1083,14 +1080,24 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 						   CANINTF_RX0IF, 0x00);
 		}
 
+		/* intf needs to be read again to avoid a race condition */
+		mcp251x_read_2regs(spi, CANINTF, &intf1, &eflag1);
+
 		/* receive buffer 1 */
-		if (intf & CANINTF_RX1IF) {
+		if (intf1 & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
 			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
 
+		/* combine flags from both operations for error handling */
+		intf = intf0 | intf1;
+		eflag = eflag0 | eflag1;
+
+		/* mask out flags we don't care about */
+		intf &= CANINTF_RX | CANINTF_TX | CANINTF_ERR;
+
 		/* any error or tx interrupt we need to clear? */
 		if (intf & (CANINTF_ERR | CANINTF_TX))
 			clear_intf |= intf & (CANINTF_ERR | CANINTF_TX);
-- 
2.36.1