| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220825214423.903672-7-michael@walle.cc>
Date: Thu, 25 Aug 2022 23:44:15 +0200
From: Michael Walle <michael@...le.cc>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rafał Miłecki <rafal@...ecki.pl>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Frank Rowand <frowand.list@...il.com>
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org, Ahmad Fatoum <a.fatoum@...gutronix.de>,
Michael Walle <michael@...le.cc>
Subject: [PATCH v1 06/14] nvmem: core: introduce NVMEM layouts
NVMEM layouts are used to generate NVMEM cells during runtime. Think of
an EEPROM with a well-defined conent. For now, the content can be
described by a device tree or a board file. But this only works if the
offsets and lengths are static and don't change. One could also argue
that putting the layout of the EEPROM in the device tree is the wrong
place. Instead, the device tree should just have a specific compatible
string.
Right now there are two use cases:
(1) The NVMEM cell needs special processing. E.g. if it only specifies
a base MAC address offset and you need to add an offset, or it
needs to parse a MAC from ASCII format or some proprietary format.
(Post processing of cells is added in a later commit).
(2) u-boot environment parsing. The cells don't have a particular
offset but it needs parsing the content to determine the offsets
and length.
Signed-off-by: Michael Walle <michael@...le.cc>
---
drivers/nvmem/Kconfig | 2 ++
drivers/nvmem/Makefile | 1 +
drivers/nvmem/core.c | 57 ++++++++++++++++++++++++++++++++++
drivers/nvmem/layouts/Kconfig | 5 +++
drivers/nvmem/layouts/Makefile | 4 +++
include/linux/nvmem-provider.h | 38 +++++++++++++++++++++++
6 files changed, 107 insertions(+)
create mode 100644 drivers/nvmem/layouts/Kconfig
create mode 100644 drivers/nvmem/layouts/Makefile
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index bab8a29c9861..1416837b107b 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -357,4 +357,6 @@ config NVMEM_U_BOOT_ENV
If compiled as module it will be called nvmem_u-boot-env.
+source "drivers/nvmem/layouts/Kconfig"
+
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 399f9972d45b..cd5a5baa2f3a 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_NVMEM) += nvmem_core.o
nvmem_core-y := core.o
+obj-y += layouts/
# Devices
obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 3dfd149374a8..5357fc378700 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -74,6 +74,9 @@ static LIST_HEAD(nvmem_lookup_list);
static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
+static DEFINE_SPINLOCK(nvmem_layout_lock);
+static LIST_HEAD(nvmem_layouts);
+
static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
void *val, size_t bytes)
{
@@ -744,6 +747,56 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
return 0;
}
+int nvmem_register_layout(struct nvmem_layout *layout)
+{
+ spin_lock(&nvmem_layout_lock);
+ list_add(&layout->node, &nvmem_layouts);
+ spin_unlock(&nvmem_layout_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_register_layout);
+
+static struct nvmem_layout *nvmem_get_compatible_layout(struct device_node *np)
+{
+ struct nvmem_layout *p, *ret = NULL;
+
+ spin_lock(&nvmem_layout_lock);
+
+ list_for_each_entry(p, &nvmem_layouts, node) {
+ if (of_match_node(p->of_match_table, np)) {
+ ret = p;
+ break;
+ }
+ }
+
+ spin_unlock(&nvmem_layout_lock);
+
+ return ret;
+}
+
+static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
+{
+ struct nvmem_layout *layout;
+
+ layout = nvmem_get_compatible_layout(nvmem->dev.of_node);
+ if (layout)
+ layout->add_cells(&nvmem->dev, nvmem, layout);
+
+ return 0;
+}
+
+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(layout->of_match_table, nvmem->dev.of_node);
+
+ return match ? match->data : NULL;
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data);
+
/**
* nvmem_register() - Register a nvmem device for given nvmem_config.
* Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
@@ -872,6 +925,10 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (rval)
goto err_remove_cells;
+ rval = nvmem_add_cells_from_layout(nvmem);
+ if (rval)
+ goto err_remove_cells;
+
blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
return nvmem;
diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
new file mode 100644
index 000000000000..9ad3911d1605
--- /dev/null
+++ b/drivers/nvmem/layouts/Kconfig
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Layout Types"
+
+endmenu
diff --git a/drivers/nvmem/layouts/Makefile b/drivers/nvmem/layouts/Makefile
new file mode 100644
index 000000000000..6fdb3c60a4fa
--- /dev/null
+++ b/drivers/nvmem/layouts/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nvmem layouts.
+#
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index e710404959e7..323685841e9f 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -127,6 +127,28 @@ struct nvmem_cell_table {
struct list_head node;
};
+/**
+ * struct nvmem_layout - NVMEM layout definitions
+ *
+ * @name: Layout name.
+ * @of_match_table: Open firmware match table.
+ * @add_cells: Will be called if a nvmem device is found which
+ * has this layout. The function will add layout
+ * specific cells with nvmem_add_one_cell().
+ * @node: List node.
+ *
+ * A nvmem device can hold a well defined structure which can just be
+ * evaluated during runtime. For example a TLV list, or a list of "name=val"
+ * pairs. A nvmem layout can parse the nvmem device and add appropriate
+ * cells.
+ */
+struct nvmem_layout {
+ const char *name;
+ const struct of_device_id *of_match_table;
+ int (*add_cells)(struct nvmem_device *nvmem, struct nvmem_layout *layout);
+ struct list_head node;
+};
+
#if IS_ENABLED(CONFIG_NVMEM)
struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
@@ -141,6 +163,10 @@ void nvmem_del_cell_table(struct nvmem_cell_table *table);
int nvmem_add_one_cell(struct nvmem_device *nvmem,
const struct nvmem_cell_info *info);
+int nvmem_register_layout(struct nvmem_layout *layout);
+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout);
+
#else
static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
@@ -161,5 +187,17 @@ static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
static inline int nvmem_add_one_cell(struct nvmem_device *nvmem,
const struct nvmem_cell_info *info) {}
+static inline int nvmem_register_layout(struct nvmem_layout *layout)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline const void *
+nvmem_layout_get_match_data(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ return NULL;
+}
+
#endif /* CONFIG_NVMEM */
#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */
--
2.30.2
Powered by blists - more mailing lists