| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220825214423.903672-11-michael@walle.cc>
Date: Thu, 25 Aug 2022 23:44:19 +0200
From: Michael Walle <michael@...le.cc>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Rafał Miłecki <rafal@...ecki.pl>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Frank Rowand <frowand.list@...il.com>
Cc: linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
netdev@...r.kernel.org, Ahmad Fatoum <a.fatoum@...gutronix.de>,
Michael Walle <michael@...le.cc>
Subject: [PATCH v1 10/14] nvmem: layouts: add sl28vpd layout
This layout applies to the VPD of the Kontron sl28 boards. The VPD only
contains a base MAC address. Therefore, we have to add an individual
offset to it. This is done by taking the second argument of the nvmem
phandle into account. Also this let us checking the VPD version and the
checksum.
Signed-off-by: Michael Walle <michael@...le.cc>
---
drivers/nvmem/layouts/Kconfig | 9 ++
drivers/nvmem/layouts/Makefile | 2 +
drivers/nvmem/layouts/sl28vpd.c | 144 ++++++++++++++++++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 drivers/nvmem/layouts/sl28vpd.c
diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
index 9ad3911d1605..75082f6b471d 100644
--- a/drivers/nvmem/layouts/Kconfig
+++ b/drivers/nvmem/layouts/Kconfig
@@ -2,4 +2,13 @@
menu "Layout Types"
+config NVMEM_LAYOUT_SL28_VPD
+ bool "Kontron sl28 VPD layout support"
+ select CRC8
+ help
+ Say Y here if you want to support the VPD layout of the Kontron
+ SMARC-sAL28 boards.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/nvmem/layouts/Makefile b/drivers/nvmem/layouts/Makefile
index 6fdb3c60a4fa..fc617b9e87d0 100644
--- a/drivers/nvmem/layouts/Makefile
+++ b/drivers/nvmem/layouts/Makefile
@@ -2,3 +2,5 @@
#
# Makefile for nvmem layouts.
#
+
+obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c
new file mode 100644
index 000000000000..e6ec673aa58a
--- /dev/null
+++ b/drivers/nvmem/layouts/sl28vpd.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/crc8.h>
+#include <linux/etherdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <uapi/linux/if_ether.h>
+
+#define SL28VPD_MAGIC 'V'
+
+struct sl28vpd_header {
+ u8 magic;
+ u8 version;
+} __packed;
+
+struct sl28vpd_v1 {
+ struct sl28vpd_header header;
+ char serial_number[15];
+ u8 base_mac_address[ETH_ALEN];
+ u8 crc8;
+} __packed;
+
+static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ if (bytes != ETH_ALEN)
+ return -EINVAL;
+
+ if (index < 0)
+ return -EINVAL;
+
+ if (!is_valid_ether_addr(buf))
+ return -EINVAL;
+
+ eth_addr_add(buf, index);
+
+ return 0;
+}
+
+static const struct nvmem_cell_info sl28vpd_v1_entries[] = {
+ {
+ .name = "serial-number",
+ .offset = offsetof(struct sl28vpd_v1, serial_number),
+ .bytes = sizeof_field(struct sl28vpd_v1, serial_number),
+ },
+ {
+ .name = "base-mac-address",
+ .offset = offsetof(struct sl28vpd_v1, base_mac_address),
+ .bytes = sizeof_field(struct sl28vpd_v1, base_mac_address),
+ .post_process = sl28vpd_mac_address_pp,
+ },
+};
+
+static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem)
+{
+ struct sl28vpd_v1 data_v1;
+ u8 table[CRC8_TABLE_SIZE];
+ int ret;
+ u8 crc;
+
+ crc8_populate_msb(table, 0x07);
+
+ ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1);
+ if (ret < 0)
+ return ret;
+ else if (ret != sizeof(data_v1))
+ return -EIO;
+
+ crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0);
+
+ if (crc != data_v1.crc8) {
+ dev_err(dev,
+ "Checksum is invalid (got %02x, expected %02x).\n",
+ crc, data_v1.crc8);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ const struct nvmem_cell_info *pinfo;
+ struct nvmem_cell_info info = {0};
+ struct sl28vpd_header hdr;
+ int ret, i;
+
+ /* check header */
+ ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
+ if (ret < 0)
+ return ret;
+ else if (ret != sizeof(hdr))
+ return -EIO;
+
+ if (hdr.magic != SL28VPD_MAGIC) {
+ dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic);
+ return -EINVAL;
+ }
+
+ if (hdr.version != 1) {
+ dev_err(dev, "Version %d is unsupported.\n", hdr.version);
+ return -EINVAL;
+ }
+
+ ret = sl28vpd_v1_check_crc(dev, nvmem);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) {
+ pinfo = &sl28vpd_v1_entries[i];
+
+ info.name = pinfo->name;
+ info.offset = pinfo->offset;
+ info.bytes = pinfo->bytes;
+ info.post_process = pinfo->post_process;
+ info.np = of_get_child_by_name(dev->of_node, pinfo->name);
+
+ ret = nvmem_add_one_cell(nvmem, &info);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id sl28vpd_of_match_table[] = {
+ { .compatible = "kontron,sl28-vpd" },
+ {},
+};
+
+struct nvmem_layout sl28vpd_layout = {
+ .name = "sl28-vpd",
+ .of_match_table = sl28vpd_of_match_table,
+ .add_cells = sl28vpd_add_cells,
+};
+
+static int __init sl28vpd_init(void)
+{
+ return nvmem_register_layout(&sl28vpd_layout);
+}
+subsys_initcall(sl28vpd_init);
--
2.30.2
Powered by blists - more mailing lists