lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ccd6f6c2-458d-832a-7299-d9d9ffb652a8@linaro.org>
Date:   Mon, 12 Sep 2022 22:58:05 +0530
From:   Bhupesh Sharma <bhupesh.sharma@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        devicetree@...r.kernel.org
Cc:     linux-arm-msm@...r.kernel.org, agross@...nel.org,
        bhupesh.linux@...il.com, linux-kernel@...r.kernel.org,
        robh+dt@...nel.org, netdev@...r.kernel.org,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh@...nel.org>, Vinod Koul <vkoul@...nel.org>,
        David Miller <davem@...emloft.net>
Subject: Re: [PATCH 1/4] dt-bindings: net: qcom,ethqos: Convert bindings to
 yaml

Hi Krzysztof,

Thanks for your comments.

On 9/8/22 8:08 PM, Krzysztof Kozlowski wrote:
> On 07/09/2022 22:49, Bhupesh Sharma wrote:
>> Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
>>
>> Cc: Bjorn Andersson <andersson@...nel.org>
>> Cc: Rob Herring <robh@...nel.org>
>> Cc: Vinod Koul <vkoul@...nel.org>
>> Cc: David Miller <davem@...emloft.net>
>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> 
> Thank you for your patch. There is something to discuss/improve.
> 
>> ---
>>   .../devicetree/bindings/net/qcom,ethqos.txt   |  66 ---------
>>   .../devicetree/bindings/net/qcom,ethqos.yaml  | 139 ++++++++++++++++++
> 
> You need to update maintainers - old path.

Sure, my bad. Will do in v2.

>>   2 files changed, 139 insertions(+), 66 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.txt
>>   create mode 100644 Documentation/devicetree/bindings/net/qcom,ethqos.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
>> deleted file mode 100644
>> index 1f5746849a71..000000000000
>> --- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
>> +++ /dev/null
>> @@ -1,66 +0,0 @@
>> -Qualcomm Ethernet ETHQOS device
>> -
>> -This documents dwmmac based ethernet device which supports Gigabit
>> -ethernet for version v2.3.0 onwards.
>> -
>> -This device has following properties:
>> -
>> -Required properties:
>> -
>> -- compatible: Should be one of:
>> -		"qcom,qcs404-ethqos"
>> -		"qcom,sm8150-ethqos"
>> -
>> -- reg: Address and length of the register set for the device
>> -
>> -- reg-names: Should contain register names "stmmaceth", "rgmii"
>> -
>> -- clocks: Should contain phandle to clocks
>> -
>> -- clock-names: Should contain clock names "stmmaceth", "pclk",
>> -		"ptp_ref", "rgmii"
>> -
>> -- interrupts: Should contain phandle to interrupts
>> -
>> -- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
>> -
>> -Rest of the properties are defined in stmmac.txt file in same directory
>> -
>> -
>> -Example:
>> -
>> -ethernet: ethernet@...0000 {
>> -	compatible = "qcom,qcs404-ethqos";
>> -	reg = <0x07a80000 0x10000>,
>> -		<0x07a96000 0x100>;
>> -	reg-names = "stmmaceth", "rgmii";
>> -	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
>> -	clocks = <&gcc GCC_ETH_AXI_CLK>,
>> -		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
>> -		<&gcc GCC_ETH_PTP_CLK>,
>> -		<&gcc GCC_ETH_RGMII_CLK>;
>> -	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
>> -			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
>> -	interrupt-names = "macirq", "eth_lpi";
>> -	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
>> -	snps,reset-active-low;
>> -
>> -	snps,txpbl = <8>;
>> -	snps,rxpbl = <2>;
>> -	snps,aal;
>> -	snps,tso;
>> -
>> -	phy-handle = <&phy1>;
>> -	phy-mode = "rgmii";
>> -
>> -	mdio {
>> -		#address-cells = <0x1>;
>> -		#size-cells = <0x0>;
>> -		compatible = "snps,dwmac-mdio";
>> -		phy1: phy@4 {
>> -			device_type = "ethernet-phy";
>> -			reg = <0x4>;
>> -		};
>> -	};
>> -
>> -};
>> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
>> new file mode 100644
>> index 000000000000..f05df9b0d106
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
>> @@ -0,0 +1,139 @@
>> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Ethernet ETHQOS device
>> +
>> +maintainers:
>> +  - Bhupesh Sharma <bhupesh.sharma@...aro.org>
>> +
>> +description:
>> +  This binding describes the dwmmac based Qualcomm ethernet devices which
>> +  support Gigabit ethernet (version v2.3.0 onwards).
>> +
>> +  So, this file documents platform glue layer for dwmmac stmmac based Qualcomm
>> +  ethernet devices.
>> +
>> +allOf:
>> +  - $ref: "snps,dwmac.yaml#"
> 
> No need for quotes.

Ok.

>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - qcom,qcs404-ethqos
>> +      - qcom,sm8150-ethqos
>> +
>> +  reg: true
> 
> I think both devices use two reg spaces.

On this platform the two reg spaces are 64-bit, whereas for other
platforms based on dwmmac, for e.g. stm32 have 32-bit address space.

>> +
>> +  reg-names:
>> +    minItems: 1
> 
> Why allowing only one item?

Ok, let me remove this in v2.

>> +    items:
>> +      - const: stmmaceth
>> +      - const: rgmii
>> +
>> +  interrupts: true
> 
> This should be specific/fixed.
> 
>> +
>> +  interrupt-names: true
> 
> This should be specific/fixed.

These are same as in $ref: "snps,dwmac.yaml#", so
do we really need to specify them here? I remember on the sdhci-msm
YAML patch review, Rob mentioned that we should just set the property to 
true, in such cases.

Am I missing something here?

>> +
>> +  clocks:
>> +    minItems: 1
>> +    maxItems: 4
> 
> Why such flexibility?

Ok, let me just keep 'maxItems: 4' here for now.

>> +
>> +  clock-names:
>> +    minItems: 1
>> +    items:
>> +      - const: stmmaceth
>> +      - const: pclk
>> +      - const: ptp_ref
>> +      - const: rgmii
>> +
>> +  iommus:
>> +    minItems: 1
>> +    maxItems: 2
> 
> Aren't we using only one MMU?

It was just for future compatibility, but I get your point.
Let me keep the 'maxItems: 1' here for now.

>> +
>> +  mdio: true
>> +
>> +  phy-handle: true
>> +
>> +  phy-mode: true
>> +
>> +  snps,reset-gpio: true
>> +
>> +  snps,tso:
>> +    $ref: /schemas/types.yaml#/definitions/flag
>> +    description:
>> +      Enables the TSO feature otherwise it will be managed by MAC HW capability register.
>> +
>> +  power-domains: true
>> +
>> +  resets: true
>> +
>> +  rx-fifo-depth: true
>> +
>> +  tx-fifo-depth: true
> 
> You do not list all these properties, because you use
> unevaluatedProperties. Drop all of these "xxx :true".

Same query as above. May be I am missing something here.

>> +
>> +required:
>> +  - compatible
>> +  - clocks
>> +  - clock-names

Thanks,
Bhupesh

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ