[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <71059a78-44df-4f92-c6ee-23ac19450f7f@amd.com>
Date: Thu, 20 Oct 2022 12:33:49 -0500
From: Tom Lendacky <thomas.lendacky@....com>
To: Raju Rangoju <Raju.Rangoju@....com>, Shyam-sundar.S-k@....com,
davem@...emloft.net, kuba@...nel.org
Cc: netdev@...r.kernel.org, Rajesh1.Kumar@....com
Subject: Re: [PATCH v3 net 0/5] amd-xgbe: Miscellaneous fixes
On 10/20/22 01:42, Raju Rangoju wrote:
> (1) Fix the rrc for Yellow carp devices. CDR workaround path
> is disabled for YC devices, receiver reset cycle is not
> needed in such cases.
>
> (2) Add enumerations for mailbox command and sub-commands.
> Instead of using hard-coded values, use enums.
>
> (3) Enable PLL_CTL for fixed PHY modes only. Driver does not
> implement SW RRCM for Autoneg Off configuration, hence PLL
> is needed for fixed PHY modes only.
>
> (4) Fix the SFP compliance codes check for DAC cables. Some of
> the passive cables have non-zero data at offset 6 in
> SFP EEPROM data. So, fix the sfp compliance codes check.
>
> (5) Add a quirk for Molex passive cables to extend the rate
> ceiling to 0x78.
>
> Raju Rangoju (5):
> amd-xgbe: Yellow carp devices do not need rrc
> amd-xgbe: use enums for mailbox cmd and sub_cmds
> amd-xgbe: enable PLL_CTL for fixed PHY modes only
> amd-xgbe: fix the SFP compliance codes check for DAC cables
> amd-xgbe: add the bit rate quirk for Molex cables
For the series,
Acked-by: Tom Lendacky <thomas.lendacky@....com>
>
> drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 5 ++
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 58 +++++++++++++--------
> drivers/net/ethernet/amd/xgbe/xgbe.h | 26 +++++++++
> 3 files changed, 68 insertions(+), 21 deletions(-)
>
Powered by blists - more mailing lists