netdev - [V3 net 02/16] net/mlx5: Wait for firmware to enable CRS before pci_restore

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221024115357.37278-3-saeed@kernel.org>
Date:   Mon, 24 Oct 2022 12:53:43 +0100
From:   Saeed Mahameed <saeed@...nel.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Eric Dumazet <edumazet@...gle.com>
Cc:     Saeed Mahameed <saeedm@...dia.com>, netdev@...r.kernel.org,
        Tariq Toukan <tariqt@...dia.com>,
        Moshe Shemesh <moshe@...dia.com>
Subject: [V3 net 02/16] net/mlx5: Wait for firmware to enable CRS before pci_restore_state

From: Moshe Shemesh <moshe@...dia.com>

After firmware reset driver should verify firmware already enabled CRS
and became responsive to pci config cycles before restoring pci state.
Fix that by waiting till device_id is readable through PCI again.

Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Signed-off-by: Moshe Shemesh <moshe@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 .../net/ethernet/mellanox/mlx5/core/fw_reset.c  | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index e8896f368362..07c583996c29 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -358,6 +358,23 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
 		err = -ETIMEDOUT;
 	}
 
+	do {
+		err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, &reg16);
+		if (err)
+			return err;
+		if (reg16 == dev_id)
+			break;
+		msleep(20);
+	} while (!time_after(jiffies, timeout));
+
+	if (reg16 == dev_id) {
+		mlx5_core_info(dev, "Firmware responds to PCI config cycles again\n");
+	} else {
+		mlx5_core_err(dev, "Firmware is not responsive (0x%04x) after %llu ms\n",
+			      reg16, mlx5_tout_ms(dev, PCI_TOGGLE));
+		err = -ETIMEDOUT;
+	}
+
 restore:
 	list_for_each_entry(sdev, &bridge_bus->devices, bus_list) {
 		pci_cfg_access_unlock(sdev);
-- 
2.37.3