| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Nov 2022 15:56:58 +0530
From: Md Danish Anwar <a0501179@...com>
To: Andrew Lunn <andrew@...n.ch>
CC: <linux-kernel@...r.kernel.org>, <davem@...emloft.net>,
<edumazet@...gle.com>, <krzysztof.kozlowski+dt@...aro.org>,
<netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<nm@...com>, <ssantosh@...nel.org>, <s-anna@...com>,
<linux-arm-kernel@...ts.infradead.org>, <rogerq@...nel.org>,
<vigneshr@...com>, <robh+dt@...nel.org>, <afd@...com>
Subject: Re: [PATCH v2 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
Hi Andrew,
I am Danish, new addition to TI team. Puranjay left TI, I'll be posting
upstream patches for Programmable Real-time Unit and Industrial Communication
Subsystem Gigabit (PRU_ICSSG).
On 05/06/22 21:07, Andrew Lunn wrote:
>> +static inline u32 addr_to_da0(const u8 *addr)
>> +{
>> + return (u32)(addr[0] | addr[1] << 8 |
>> + addr[2] << 16 | addr[3] << 24);
>> +};
>> +
>> +static inline u32 addr_to_da1(const u8 *addr)
>> +{
>> + return (u32)(addr[4] | addr[5] << 8);
>> +};
>
> No inline functions please.
>
Sure I will remove the inline function.
There are total 8 instances where the above two inline functions are called.
So if I removed these inline functions there are two approaches to address the
8 instances.
1. Instead of calling these functions, I should use the return logic "(u32)
(addr[4] | addr[5] << 8);" at all the 8 instances.
2. I can define a macro for this logic and call the macro for all the 8 instances.
Please let me know which approach should I go with. Also if you have any other
approach, please let me know.
>> +
>> +static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
>> + u16 start, u8 len)
>> +{
>> + u32 offset, val;
>> +
>> + offset = offs[slice].ft1_start_len;
>> + val = FT1_LEN(len) | FT1_START(start);
>> + regmap_write(miig_rt, offset, val);
>> +}
>> +
>> +static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
>> + int n, const u8 *addr)
>> +{
>> + u32 offset;
>> +
>> + offset = FT1_N_REG(slice, n, FT1_DA0);
>> + regmap_write(miig_rt, offset, addr_to_da0(addr));
>> + offset = FT1_N_REG(slice, n, FT1_DA1);
>> + regmap_write(miig_rt, offset, addr_to_da1(addr));
>> +}
>> +
>> +static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
>> + int n, const u8 *addr)
>> +{
>> + u32 offset;
>> +
>> + offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
>> + regmap_write(miig_rt, offset, addr_to_da0(addr));
>> + offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
>> + regmap_write(miig_rt, offset, addr_to_da1(addr));
>> +}
>> +
>> +static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int n,
>> + enum ft1_cfg_type type)
>> +{
>> + u32 offset;
>> +
>> + offset = offs[slice].ft1_cfg;
>> + regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
>> + type << FT1_CFG_SHIFT(n));
>> +}
>> +
>> +static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
>> + enum rx_class_sel_type type)
>> +{
>> + u32 offset;
>> +
>> + offset = offs[slice].rx_class_cfg1;
>> + regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
>> + type << RX_CLASS_SEL_SHIFT(n));
>> +}
>> +
>> +static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
>> + u32 data)
>> +{
>> + u32 offset;
>> +
>> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
>> + regmap_write(miig_rt, offset, data);
>> +}
>> +
>> +static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
>> + u32 data)
>> +{
>> + u32 offset;
>> +
>> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
>> + regmap_write(miig_rt, offset, data);
>> +}
>> +
>> +void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
>> +{
>> + regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
>> + regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
>> +}
>> +
>> +void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
>> +{
>> + regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
>> + regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
>> +}
>> +
>> +/* disable all RX traffic */
>> +void icssg_class_disable(struct regmap *miig_rt, int slice)
>> +{
>> + u32 data, offset;
>> + int n;
>> +
>> + /* Enable RX_L2_G */
>> + regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
>> + ICSSG_CFG_RX_L2_G_EN);
>> +
>> + for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++) {
>> + /* AND_EN = 0 */
>> + rx_class_set_and(miig_rt, slice, n, 0);
>> + /* OR_EN = 0 */
>> + rx_class_set_or(miig_rt, slice, n, 0);
>> +
>> + /* set CFG1 to OR */
>> + rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
>> +
>> + /* configure gate */
>> + offset = RX_CLASS_GATES_N_REG(slice, n);
>> + regmap_read(miig_rt, offset, &data);
>> + /* clear class_raw so we go through filters */
>> + data &= ~RX_CLASS_GATES_RAW_MASK;
>> + /* set allow and phase mask */
>> + data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
>> + regmap_write(miig_rt, offset, data);
>> + }
>> +
>> + /* FT1 Disabled */
>> + for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
>> + u8 addr[] = { 0, 0, 0, 0, 0, 0, };
>> +
>> + rx_class_ft1_cfg_set_type(miig_rt, slice, n,
>> + FT1_CFG_TYPE_DISABLED);
>> + rx_class_ft1_set_da(miig_rt, slice, n, addr);
>> + rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
>> + }
>> +
>> + /* clear CFG2 */
>> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
>> +}
>> +
>> +void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
>> +{
>> + int classifiers_in_use = 1;
>> + u32 data;
>> + int n;
>> +
>> + /* defaults */
>> + icssg_class_disable(miig_rt, slice);
>> +
>> + /* Setup Classifier */
>> + for (n = 0; n < classifiers_in_use; n++) {
>> + /* match on Broadcast or MAC_PRU address */
>> + data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
>> +
>> + /* multicast? */
>> + if (allmulti)
>> + data |= RX_CLASS_FT_MC;
>> +
>> + rx_class_set_or(miig_rt, slice, n, data);
>> +
>> + /* set CFG1 for OR_OR_AND for classifier */
>> + rx_class_sel_set_type(miig_rt, slice, n,
>> + RX_CLASS_SEL_TYPE_OR_OR_AND);
>> + }
>> +
>> + /* clear CFG2 */
>> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
>> +}
>> +
>> +/* required for SAV check */
>> +void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
>> +{
>> + u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
>> +
>> + rx_class_ft1_set_start_len(miig_rt, slice, 0, 6);
>> + rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
>> + rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
>> + rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg_config.c b/drivers/net/ethernet/ti/icssg_config.c
>> new file mode 100644
>> index 000000000000..a88ea4933802
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_config.c
>> @@ -0,0 +1,440 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
>> + */
>> +
>> +#include <linux/iopoll.h>
>> +#include <linux/regmap.h>
>> +#include <uapi/linux/if_ether.h>
>> +#include "icssg_config.h"
>> +#include "icssg_prueth.h"
>> +#include "icssg_switch_map.h"
>> +#include "icssg_mii_rt.h"
>> +
>> +/* TX IPG Values to be set for 100M link speed. These values are
>> + * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
>> + * h/w design.
>> + */
>> +
>> +/* IPG is in core_clk cycles */
>> +#define MII_RT_TX_IPG_100M 0x17
>> +#define MII_RT_TX_IPG_1G 0xb
>> +
>> +#define ICSSG_QUEUES_MAX 64
>> +#define ICSSG_QUEUE_OFFSET 0xd00
>> +#define ICSSG_QUEUE_PEEK_OFFSET 0xe00
>> +#define ICSSG_QUEUE_CNT_OFFSET 0xe40
>> +#define ICSSG_QUEUE_RESET_OFFSET 0xf40
>> +
>> +#define ICSSG_NUM_TX_QUEUES 8
>> +
>> +#define RECYCLE_Q_SLICE0 16
>> +#define RECYCLE_Q_SLICE1 17
>> +
>> +#define ICSSG_NUM_OTHER_QUEUES 5 /* port, host and special queues */
>> +
>> +#define PORT_HI_Q_SLICE0 32
>> +#define PORT_LO_Q_SLICE0 33
>> +#define HOST_HI_Q_SLICE0 34
>> +#define HOST_LO_Q_SLICE0 35
>> +#define HOST_SPL_Q_SLICE0 40 /* Special Queue */
>> +
>> +#define PORT_HI_Q_SLICE1 36
>> +#define PORT_LO_Q_SLICE1 37
>> +#define HOST_HI_Q_SLICE1 38
>> +#define HOST_LO_Q_SLICE1 39
>> +#define HOST_SPL_Q_SLICE1 41 /* Special Queue */
>> +
>> +#define MII_RXCFG_DEFAULT (PRUSS_MII_RT_RXCFG_RX_ENABLE | \
>> + PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
>> + PRUSS_MII_RT_RXCFG_RX_L2_EN | \
>> + PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
>> +
>> +#define MII_TXCFG_DEFAULT (PRUSS_MII_RT_TXCFG_TX_ENABLE | \
>> + PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
>> + PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
>> + PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
>> +
>> +#define ICSSG_CFG_DEFAULT (ICSSG_CFG_TX_L1_EN | \
>> + ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
>> + ICSSG_CFG_TX_PRU_EN | \
>> + ICSSG_CFG_SGMII_MODE)
>> +
>> +#define FDB_GEN_CFG1 0x60
>> +#define SMEM_VLAN_OFFSET 8
>> +#define SMEM_VLAN_OFFSET_MASK GENMASK(25, 8)
>> +
>> +#define FDB_GEN_CFG2 0x64
>> +#define FDB_VLAN_EN BIT(6)
>> +#define FDB_HOST_EN BIT(2)
>> +#define FDB_PRU1_EN BIT(1)
>> +#define FDB_PRU0_EN BIT(0)
>> +#define FDB_EN_ALL (FDB_PRU0_EN | FDB_PRU1_EN | \
>> + FDB_HOST_EN | FDB_VLAN_EN)
>> +
>> +struct map {
>> + int queue;
>> + u32 pd_addr_start;
>> + u32 flags;
>> + bool special;
>> +};
>> +
>> +struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
>> + {
>> + { PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
>> + { PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
>> + { HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
>> + { HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
>> + { HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
>> + },
>> + {
>> + { PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
>> + { PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
>> + { HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
>> + { HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
>> + { HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
>> + },
>> +};
>> +
>> +static void icssg_config_mii_init(struct prueth_emac *emac)
>> +{
>> + struct prueth *prueth = emac->prueth;
>> + struct regmap *mii_rt = prueth->mii_rt;
>> + int slice = prueth_emac_slice(emac);
>> + u32 rxcfg_reg, txcfg_reg, pcnt_reg;
>> + u32 rxcfg, txcfg;
>> +
>> + rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 :
>> + PRUSS_MII_RT_RXCFG1;
>> + txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
>> + PRUSS_MII_RT_TXCFG1;
>> + pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
>> + PRUSS_MII_RT_RX_PCNT1;
>> +
>> + rxcfg = MII_RXCFG_DEFAULT;
>> + txcfg = MII_TXCFG_DEFAULT;
>> +
>> + if (slice == ICSS_MII1)
>> + rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL;
>> +
>> + /* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need
>> + * to be swapped also comparing to RGMII mode.
>> + */
>> + if (emac->phy_if == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
>> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
>> + else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
>> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
>> +
>> + regmap_write(mii_rt, rxcfg_reg, rxcfg);
>> + regmap_write(mii_rt, txcfg_reg, txcfg);
>> + regmap_write(mii_rt, pcnt_reg, 0x1);
>> +}
>> +
>> +static void icssg_miig_queues_init(struct prueth *prueth, int slice)
>> +{
>> + struct regmap *miig_rt = prueth->miig_rt;
>> + void __iomem *smem = prueth->shram.va;
>> + u8 pd[ICSSG_SPECIAL_PD_SIZE];
>> + int queue = 0, i, j;
>> + u32 *pdword;
>> +
>> + /* reset hwqueues */
>> + if (slice)
>> + queue = ICSSG_NUM_TX_QUEUES;
>> +
>> + for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
>> + queue++;
>> + }
>> +
>> + queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
>> +
>> + for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
>> + hwq_map[slice][i].queue);
>> + }
>> +
>> + /* initialize packet descriptors in SMEM */
>> + /* push pakcet descriptors to hwqueues */
>> +
>> + pdword = (u32 *)pd;
>> + for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
>> + struct map *mp;
>> + int pd_size, num_pds;
>> + u32 pdaddr;
>> +
>> + mp = &hwq_map[slice][j];
>> + if (mp->special) {
>> + pd_size = ICSSG_SPECIAL_PD_SIZE;
>> + num_pds = ICSSG_NUM_SPECIAL_PDS;
>> + } else {
>> + pd_size = ICSSG_NORMAL_PD_SIZE;
>> + num_pds = ICSSG_NUM_NORMAL_PDS;
>> + }
>> +
>> + for (i = 0; i < num_pds; i++) {
>> + memset(pd, 0, pd_size);
>> +
>> + pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
>> + pdword[0] |= cpu_to_le32(mp->flags);
>> + pdaddr = mp->pd_addr_start + i * pd_size;
>> +
>> + memcpy_toio(smem + pdaddr, pd, pd_size);
>> + queue = mp->queue;
>> + regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
>> + pdaddr);
>> + }
>> + }
>> +}
>> +
>> +void icssg_config_ipg(struct prueth_emac *emac)
>> +{
>> + struct prueth *prueth = emac->prueth;
>> + int slice = prueth_emac_slice(emac);
>> +
>> + switch (emac->speed) {
>> + case SPEED_1000:
>> + icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
>> + break;
>> + case SPEED_100:
>> + icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
>> + break;
>> + default:
>> + /* Other links speeds not supported */
>> + netdev_err(emac->ndev, "Unsupported link speed\n");
>> + return;
>> + }
>> +}
>> +
>> +static void emac_r30_cmd_init(struct prueth_emac *emac)
>> +{
>> + int i;
>> + struct icssg_r30_cmd *p;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + for (i = 0; i < 4; i++)
>> + writel(EMAC_NONE, &p->cmd[i]);
>> +}
>> +
>> +static int emac_r30_is_done(struct prueth_emac *emac)
>> +{
>> + const struct icssg_r30_cmd *p;
>> + int i;
>> + u32 cmd;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + for (i = 0; i < 4; i++) {
>> + cmd = readl(&p->cmd[i]);
>> + if (cmd != EMAC_NONE)
>> + return 0;
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +static int prueth_emac_buffer_setup(struct prueth_emac *emac)
>> +{
>> + struct icssg_buffer_pool_cfg *bpool_cfg;
>> + struct prueth *prueth = emac->prueth;
>> + int slice = prueth_emac_slice(emac);
>> + struct icssg_rxq_ctx *rxq_ctx;
>> + u32 addr;
>> + int i;
>> +
>> + /* Layout to have 64KB aligned buffer pool
>> + * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
>> + */
>> +
>> + addr = lower_32_bits(prueth->msmcram.pa);
>> + if (slice)
>> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
>> +
>> + if (addr % SZ_64K) {
>> + dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
>> + return -EINVAL;
>> + }
>> +
>> + bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET;
>> + /* workaround for f/w bug. bpool 0 needs to be initilalized */
>> + bpool_cfg[0].addr = cpu_to_le32(addr);
>> + bpool_cfg[0].len = 0;
>> +
>> + for (i = PRUETH_EMAC_BUF_POOL_START;
>> + i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
>> + i++) {
>> + bpool_cfg[i].addr = cpu_to_le32(addr);
>> + bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
>> + addr += PRUETH_EMAC_BUF_POOL_SIZE;
>> + }
>> +
>> + if (!slice)
>> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
>> + else
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
>> +
>> + /* Pre-emptible RX buffer queue */
>> + rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET;
>> + for (i = 0; i < 3; i++)
>> + rxq_ctx->start[i] = cpu_to_le32(addr);
>> +
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
>> + rxq_ctx->end = cpu_to_le32(addr);
>> +
>> + /* Express RX buffer queue */
>> + rxq_ctx = emac->dram.va + HOST_RX_Q_EXP_CONTEXT_OFFSET;
>> + for (i = 0; i < 3; i++)
>> + rxq_ctx->start[i] = cpu_to_le32(addr);
>> +
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
>> + rxq_ctx->end = cpu_to_le32(addr);
>> +
>> + return 0;
>> +}
>> +
>> +static void icssg_init_emac_mode(struct prueth *prueth)
>> +{
>> + /* When the device is configured as a bridge and it is being brought back
>> + * to the emac mode, the host mac address has to be set as 0.
>> + */
>> + u8 mac[ETH_ALEN] = { 0 };
>> +
>> + if (prueth->emacs_initialized)
>> + return;
>> +
>> + regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, 0);
>> + regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
>> + /* Clear host MAC address */
>> + icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
>> +}
>> +
>> +int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
>> +{
>> + void *config = emac->dram.va + ICSSG_CONFIG_OFFSET;
>> + u8 *cfg_byte_ptr = config;
>> + struct icssg_flow_cfg *flow_cfg;
>> + u32 mask;
>> + int ret;
>> +
>> + icssg_init_emac_mode(prueth);
>> +
>> + memset_io(config, 0, TAS_GATE_MASK_LIST0);
>> + icssg_miig_queues_init(prueth, slice);
>> +
>> + emac->speed = SPEED_1000;
>> + emac->duplex = DUPLEX_FULL;
>> + if (!phy_interface_mode_is_rgmii(emac->phy_if)) {
>> + emac->speed = SPEED_100;
>> + emac->duplex = DUPLEX_FULL;
>> + }
>> + regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
>> + icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
>> + icssg_config_mii_init(emac);
>> + icssg_config_ipg(emac);
>> + icssg_update_rgmii_cfg(prueth->miig_rt, emac);
>> +
>> + /* set GPI mode */
>> + pruss_cfg_gpimode(prueth->pruss, prueth->pru_id[slice],
>> + PRUSS_GPI_MODE_MII);
>> +
>> + /* enable XFR shift for PRU and RTU */
>> + mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
>> + pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
>> +
>> + /* set C28 to 0x100 */
>> + pru_rproc_set_ctable(prueth->pru[slice], PRU_C28, 0x100 << 8);
>> + pru_rproc_set_ctable(prueth->rtu[slice], PRU_C28, 0x100 << 8);
>> + pru_rproc_set_ctable(prueth->txpru[slice], PRU_C28, 0x100 << 8);
>> +
>> + flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
>> + flow_cfg->rx_base_flow = cpu_to_le32(emac->rx_flow_id_base);
>> + flow_cfg->mgm_base_flow = 0;
>> + *(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
>> + *(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
>> +
>> + ret = prueth_emac_buffer_setup(emac);
>> + if (ret)
>> + return ret;
>> +
>> + emac_r30_cmd_init(emac);
>> +
>> + return 0;
>> +}
>> +
>> +static struct icssg_r30_cmd emac_r32_bitmask[] = {
>> + {{0xffff0004, 0xffff0100, 0xffff0100, EMAC_NONE}}, /* EMAC_PORT_DISABLE */
>> + {{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}}, /* EMAC_PORT_BLOCK */
>> + {{0xffbb0000, 0xfcff0000, 0xdcff0000, EMAC_NONE}}, /* EMAC_PORT_FORWARD */
>> + {{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}}, /* EMAC_PORT_FORWARD_WO_LEARNING */
>> + {{0xffff0001, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT ALL */
>> + {{0xfffe0002, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT TAGGED */
>> + {{0xfffc0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT UNTAGGED and PRIO */
>> + {{EMAC_NONE, 0xffff0020, EMAC_NONE, EMAC_NONE}}, /* TAS Trigger List change */
>> + {{EMAC_NONE, 0xdfff1000, EMAC_NONE, EMAC_NONE}}, /* TAS set state ENABLE*/
>> + {{EMAC_NONE, 0xefff2000, EMAC_NONE, EMAC_NONE}}, /* TAS set state RESET*/
>> + {{EMAC_NONE, 0xcfff0000, EMAC_NONE, EMAC_NONE}}, /* TAS set state DISABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xffff0400, EMAC_NONE}}, /* UC flooding ENABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xfbff0000, EMAC_NONE}}, /* UC flooding DISABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xffff0800, EMAC_NONE}}, /* MC flooding ENABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xf7ff0000, EMAC_NONE}}, /* MC flooding DISABLE*/
>> + {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>> + {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>> + {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>> +};
>> +
>> +int emac_set_port_state(struct prueth_emac *emac,
>> + enum icssg_port_state_cmd cmd)
>> +{
>> + struct icssg_r30_cmd *p;
>> + int ret = -ETIMEDOUT;
>> + int done = 0;
>> + int i;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
>> + netdev_err(emac->ndev, "invalid port command\n");
>> + return -EINVAL;
>> + }
>> +
>> + /* only one command at a time allowed to firmware */
>> + mutex_lock(&emac->cmd_lock);
>> +
>> + for (i = 0; i < 4; i++)
>> + writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
>> +
>> + /* wait for done */
>> + ret = read_poll_timeout(emac_r30_is_done, done, done == 1,
>> + 1000, 10000, false, emac);
>> +
>> + if (ret == -ETIMEDOUT)
>> + netdev_err(emac->ndev, "timeout waiting for command done\n");
>> +
>> + mutex_unlock(&emac->cmd_lock);
>> +
>> + return ret;
>> +}
>> +
>> +void icssg_config_set_speed(struct prueth_emac *emac)
>> +{
>> + u8 fw_speed;
>> +
>> + switch (emac->speed) {
>> + case SPEED_1000:
>> + fw_speed = FW_LINK_SPEED_1G;
>> + break;
>> + case SPEED_100:
>> + fw_speed = FW_LINK_SPEED_100M;
>> + break;
>> + default:
>> + /* Other links speeds not supported */
>> + netdev_err(emac->ndev, "Unsupported link speed\n");
>> + return;
>> + }
>> +
>> + writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg_config.h b/drivers/net/ethernet/ti/icssg_config.h
>> new file mode 100644
>> index 000000000000..43eb0922172a
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_config.h
>> @@ -0,0 +1,200 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* Texas Instruments ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
>> + *
>> + */
>> +
>> +#ifndef __NET_TI_ICSSG_CONFIG_H
>> +#define __NET_TI_ICSSG_CONFIG_H
>> +
>> +struct icssg_buffer_pool_cfg {
>> + __le32 addr;
>> + __le32 len;
>> +} __packed;
>> +
>> +struct icssg_flow_cfg {
>> + __le16 rx_base_flow;
>> + __le16 mgm_base_flow;
>> +} __packed;
>> +
>> +#define PRUETH_PKT_TYPE_CMD 0x10
>> +#define PRUETH_NAV_PS_DATA_SIZE 16 /* Protocol specific data size */
>> +#define PRUETH_NAV_SW_DATA_SIZE 16 /* SW related data size */
>> +#define PRUETH_MAX_TX_DESC 512
>> +#define PRUETH_MAX_RX_DESC 512
>> +#define PRUETH_MAX_RX_FLOWS 1 /* excluding default flow */
>> +#define PRUETH_RX_FLOW_DATA 0
>> +
>> +#define PRUETH_EMAC_BUF_POOL_SIZE SZ_8K
>> +#define PRUETH_EMAC_POOLS_PER_SLICE 24
>> +#define PRUETH_EMAC_BUF_POOL_START 8
>> +#define PRUETH_NUM_BUF_POOLS 8
>> +#define PRUETH_EMAC_RX_CTX_BUF_SIZE SZ_16K /* per slice */
>> +#define MSMC_RAM_SIZE \
>> + (2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
>> + PRUETH_EMAC_RX_CTX_BUF_SIZE * 2))
>> +
>> +struct icssg_rxq_ctx {
>> + __le32 start[3];
>> + __le32 end;
>> +} __packed;
>> +
>> +/* Load time Fiwmware Configuration */
>> +
>> +#define ICSSG_FW_MGMT_CMD_HEADER 0x81
>> +#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
>> +#define ICSSG_FW_MGMT_CMD_TYPE 0x04
>> +#define ICSSG_FW_MGMT_PKT 0x80000000
>> +
>> +struct icssg_r30_cmd {
>> + u32 cmd[4];
>> +} __packed;
>> +
>> +enum icssg_port_state_cmd {
>> + ICSSG_EMAC_PORT_DISABLE = 0,
>> + ICSSG_EMAC_PORT_BLOCK,
>> + ICSSG_EMAC_PORT_FORWARD,
>> + ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
>> + ICSSG_EMAC_PORT_ACCEPT_ALL,
>> + ICSSG_EMAC_PORT_ACCEPT_TAGGED,
>> + ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
>> + ICSSG_EMAC_PORT_TAS_TRIGGER,
>> + ICSSG_EMAC_PORT_TAS_ENABLE,
>> + ICSSG_EMAC_PORT_TAS_RESET,
>> + ICSSG_EMAC_PORT_TAS_DISABLE,
>> + ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
>> + ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
>> + ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
>> + ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
>> + ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
>> + ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>> + ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>> + ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>> + ICSSG_EMAC_PORT_MAX_COMMANDS
>> +};
>> +
>> +#define EMAC_NONE 0xffff0000
>> +#define EMAC_PRU0_P_DI 0xffff0004
>> +#define EMAC_PRU1_P_DI 0xffff0040
>> +#define EMAC_TX_P_DI 0xffff0100
>> +
>> +#define EMAC_PRU0_P_EN 0xfffb0000
>> +#define EMAC_PRU1_P_EN 0xffbf0000
>> +#define EMAC_TX_P_EN 0xfeff0000
>> +
>> +#define EMAC_P_BLOCK 0xffff0040
>> +#define EMAC_TX_P_BLOCK 0xffff0200
>> +#define EMAC_P_UNBLOCK 0xffbf0000
>> +#define EMAC_TX_P_UNBLOCK 0xfdff0000
>> +#define EMAC_LEAN_EN 0xfff70000
>> +#define EMAC_LEAN_DI 0xffff0008
>> +
>> +#define EMAC_ACCEPT_ALL 0xffff0001
>> +#define EMAC_ACCEPT_TAG 0xfffe0002
>> +#define EMAC_ACCEPT_PRIOR 0xfffc0000
>> +
>> +/* Config area lies in DRAM */
>> +#define ICSSG_CONFIG_OFFSET 0x0
>> +
>> +/* Config area lies in shared RAM */
>> +#define ICSSG_CONFIG_OFFSET_SLICE0 0
>> +#define ICSSG_CONFIG_OFFSET_SLICE1 0x8000
>> +
>> +#define ICSSG_NUM_NORMAL_PDS 64
>> +#define ICSSG_NUM_SPECIAL_PDS 16
>> +
>> +#define ICSSG_NORMAL_PD_SIZE 8
>> +#define ICSSG_SPECIAL_PD_SIZE 20
>> +
>> +#define ICSSG_FLAG_MASK 0xff00ffff
>> +
>> +struct icssg_setclock_desc {
>> + u8 request;
>> + u8 restore;
>> + u8 acknowledgment;
>> + u8 cmp_status;
>> + u32 margin;
>> + u32 cyclecounter0_set;
>> + u32 cyclecounter1_set;
>> + u32 iepcount_set;
>> + u32 rsvd1;
>> + u32 rsvd2;
>> + u32 CMP0_current;
>> + u32 iepcount_current;
>> + u32 difference;
>> + u32 cyclecounter0_new;
>> + u32 cyclecounter1_new;
>> + u32 CMP0_new;
>> +} __packed;
>> +
>> +#define ICSSG_CMD_POP_SLICE0 56
>> +#define ICSSG_CMD_POP_SLICE1 60
>> +
>> +#define ICSSG_CMD_PUSH_SLICE0 57
>> +#define ICSSG_CMD_PUSH_SLICE1 61
>> +
>> +#define ICSSG_RSP_POP_SLICE0 58
>> +#define ICSSG_RSP_POP_SLICE1 62
>> +
>> +#define ICSSG_RSP_PUSH_SLICE0 56
>> +#define ICSSG_RSP_PUSH_SLICE1 60
>> +
>> +#define ICSSG_TS_POP_SLICE0 59
>> +#define ICSSG_TS_POP_SLICE1 63
>> +
>> +#define ICSSG_TS_PUSH_SLICE0 40
>> +#define ICSSG_TS_PUSH_SLICE1 41
>> +
>> +/* FDB FID_C2 flag definitions */
>> +/* Indicates host port membership.*/
>> +#define ICSSG_FDB_ENTRY_P0_MEMBERSHIP BIT(0)
>> +/* Indicates that MAC ID is connected to physical port 1 */
>> +#define ICSSG_FDB_ENTRY_P1_MEMBERSHIP BIT(1)
>> +/* Indicates that MAC ID is connected to physical port 2 */
>> +#define ICSSG_FDB_ENTRY_P2_MEMBERSHIP BIT(2)
>> +/* Ageable bit is set for learned entries and cleared for static entries */
>> +#define ICSSG_FDB_ENTRY_AGEABLE BIT(3)
>> +/* If set for DA then packet is determined to be a special packet */
>> +#define ICSSG_FDB_ENTRY_BLOCK BIT(4)
>> +/* If set for DA then the SA from the packet is not learned */
>> +#define ICSSG_FDB_ENTRY_SECURE BIT(5)
>> +/* If set, it means packet has been seen recently with source address + FID
>> + * matching MAC address/FID of entry
>> + */
>> +#define ICSSG_FDB_ENTRY_TOUCHED BIT(6)
>> +/* Set if entry is valid */
>> +#define ICSSG_FDB_ENTRY_VALID BIT(7)
>> +
>> +/**
>> + * struct prueth_vlan_tbl - VLAN table entries struct in ICSSG SMEM
>> + * @fid_c1: membership and forwarding rules flag to this table. See
>> + * above to defines for bit definitions
>> + * @fid: FDB index for this VID (there is 1-1 mapping b/w VID and FID)
>> + */
>> +struct prueth_vlan_tbl {
>> + u8 fid_c1;
>> + u8 fid;
>> +} __packed;
>> +
>> +/**
>> + * struct prueth_fdb_slot - Result of FDB slot lookup
>> + * @mac: MAC address
>> + * @fid: fid to be associated with MAC
>> + * @fid_c2: FID_C2 entry for this MAC
>> + */
>> +struct prueth_fdb_slot {
>> + u8 mac[ETH_ALEN];
>> + u8 fid;
>> + u8 fid_c2;
>> +} __packed;
>> +
>> +enum icssg_ietfpe_verify_states {
>> + ICSSG_IETFPE_STATE_UNKNOWN = 0,
>> + ICSSG_IETFPE_STATE_INITIAL,
>> + ICSSG_IETFPE_STATE_VERIFYING,
>> + ICSSG_IETFPE_STATE_SUCCEEDED,
>> + ICSSG_IETFPE_STATE_FAILED,
>> + ICSSG_IETFPE_STATE_DISABLED
>> +};
>> +#endif /* __NET_TI_ICSSG_CONFIG_H */
>> diff --git a/drivers/net/ethernet/ti/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg_ethtool.c
>> new file mode 100644
>> index 000000000000..fd09d223b0ae
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_ethtool.c
>> @@ -0,0 +1,319 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Texas Instruments ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
>> + *
>> + */
>> +
>> +#include "icssg_prueth.h"
>> +#include <linux/regmap.h>
>> +
>> +static u32 stats_base[] = { 0x54c, /* Slice 0 stats start */
>> + 0xb18, /* Slice 1 stats start */
>> +};
>> +
>> +struct miig_stats_regs {
>> + /* Rx */
>> + u32 rx_good_frames;
>> + u32 rx_broadcast_frames;
>> + u32 rx_multicast_frames;
>> + u32 rx_crc_error_frames;
>> + u32 rx_mii_error_frames;
>> + u32 rx_odd_nibble_frames;
>> + u32 rx_frame_max_size;
>> + u32 rx_max_size_error_frames;
>> + u32 rx_frame_min_size;
>> + u32 rx_min_size_error_frames;
>> + u32 rx_overrun_frames;
>> + u32 rx_class0_hits;
>> + u32 rx_class1_hits;
>> + u32 rx_class2_hits;
>> + u32 rx_class3_hits;
>> + u32 rx_class4_hits;
>> + u32 rx_class5_hits;
>> + u32 rx_class6_hits;
>> + u32 rx_class7_hits;
>> + u32 rx_class8_hits;
>> + u32 rx_class9_hits;
>> + u32 rx_class10_hits;
>> + u32 rx_class11_hits;
>> + u32 rx_class12_hits;
>> + u32 rx_class13_hits;
>> + u32 rx_class14_hits;
>> + u32 rx_class15_hits;
>> + u32 rx_smd_frags;
>> + u32 rx_bucket1_size;
>> + u32 rx_bucket2_size;
>> + u32 rx_bucket3_size;
>> + u32 rx_bucket4_size;
>> + u32 rx_64B_frames;
>> + u32 rx_bucket1_frames;
>> + u32 rx_bucket2_frames;
>> + u32 rx_bucket3_frames;
>> + u32 rx_bucket4_frames;
>> + u32 rx_bucket5_frames;
>> + u32 rx_total_bytes;
>> + u32 rx_tx_total_bytes;
>> + /* Tx */
>> + u32 tx_good_frames;
>> + u32 tx_broadcast_frames;
>> + u32 tx_multicast_frames;
>> + u32 tx_odd_nibble_frames;
>> + u32 tx_underflow_errors;
>> + u32 tx_frame_max_size;
>> + u32 tx_max_size_error_frames;
>> + u32 tx_frame_min_size;
>> + u32 tx_min_size_error_frames;
>> + u32 tx_bucket1_size;
>> + u32 tx_bucket2_size;
>> + u32 tx_bucket3_size;
>> + u32 tx_bucket4_size;
>> + u32 tx_64B_frames;
>> + u32 tx_bucket1_frames;
>> + u32 tx_bucket2_frames;
>> + u32 tx_bucket3_frames;
>> + u32 tx_bucket4_frames;
>> + u32 tx_bucket5_frames;
>> + u32 tx_total_bytes;
>> +};
>> +
>> +#define ICSSG_STATS(field) \
>> +{ \
>> + #field, \
>> + offsetof(struct miig_stats_regs, field), \
>> +}
>> +
>> +struct icssg_stats {
>> + char name[ETH_GSTRING_LEN];
>> + u32 offset;
>> +};
>> +
>> +static const struct icssg_stats icssg_ethtool_stats[] = {
>> + /* Rx */
>> + ICSSG_STATS(rx_good_frames),
>> + ICSSG_STATS(rx_broadcast_frames),
>> + ICSSG_STATS(rx_multicast_frames),
>> + ICSSG_STATS(rx_crc_error_frames),
>> + ICSSG_STATS(rx_mii_error_frames),
>> + ICSSG_STATS(rx_odd_nibble_frames),
>> + ICSSG_STATS(rx_frame_max_size),
>> + ICSSG_STATS(rx_max_size_error_frames),
>> + ICSSG_STATS(rx_frame_min_size),
>> + ICSSG_STATS(rx_min_size_error_frames),
>> + ICSSG_STATS(rx_overrun_frames),
>> + ICSSG_STATS(rx_class0_hits),
>> + ICSSG_STATS(rx_class1_hits),
>> + ICSSG_STATS(rx_class2_hits),
>> + ICSSG_STATS(rx_class3_hits),
>> + ICSSG_STATS(rx_class4_hits),
>> + ICSSG_STATS(rx_class5_hits),
>> + ICSSG_STATS(rx_class6_hits),
>> + ICSSG_STATS(rx_class7_hits),
>> + ICSSG_STATS(rx_class8_hits),
>> + ICSSG_STATS(rx_class9_hits),
>> + ICSSG_STATS(rx_class10_hits),
>> + ICSSG_STATS(rx_class11_hits),
>> + ICSSG_STATS(rx_class12_hits),
>> + ICSSG_STATS(rx_class13_hits),
>> + ICSSG_STATS(rx_class14_hits),
>> + ICSSG_STATS(rx_class15_hits),
>> + ICSSG_STATS(rx_smd_frags),
>> + ICSSG_STATS(rx_bucket1_size),
>> + ICSSG_STATS(rx_bucket2_size),
>> + ICSSG_STATS(rx_bucket3_size),
>> + ICSSG_STATS(rx_bucket4_size),
>> + ICSSG_STATS(rx_64B_frames),
>> + ICSSG_STATS(rx_bucket1_frames),
>> + ICSSG_STATS(rx_bucket2_frames),
>> + ICSSG_STATS(rx_bucket3_frames),
>> + ICSSG_STATS(rx_bucket4_frames),
>> + ICSSG_STATS(rx_bucket5_frames),
>> + ICSSG_STATS(rx_total_bytes),
>> + ICSSG_STATS(rx_tx_total_bytes),
>> + /* Tx */
>> + ICSSG_STATS(tx_good_frames),
>> + ICSSG_STATS(tx_broadcast_frames),
>> + ICSSG_STATS(tx_multicast_frames),
>> + ICSSG_STATS(tx_odd_nibble_frames),
>> + ICSSG_STATS(tx_underflow_errors),
>> + ICSSG_STATS(tx_frame_max_size),
>> + ICSSG_STATS(tx_max_size_error_frames),
>> + ICSSG_STATS(tx_frame_min_size),
>> + ICSSG_STATS(tx_min_size_error_frames),
>> + ICSSG_STATS(tx_bucket1_size),
>> + ICSSG_STATS(tx_bucket2_size),
>> + ICSSG_STATS(tx_bucket3_size),
>> + ICSSG_STATS(tx_bucket4_size),
>> + ICSSG_STATS(tx_64B_frames),
>> + ICSSG_STATS(tx_bucket1_frames),
>> + ICSSG_STATS(tx_bucket2_frames),
>> + ICSSG_STATS(tx_bucket3_frames),
>> + ICSSG_STATS(tx_bucket4_frames),
>> + ICSSG_STATS(tx_bucket5_frames),
>> + ICSSG_STATS(tx_total_bytes),
>> +};
>> +
>> +static void emac_get_drvinfo(struct net_device *ndev,
>> + struct ethtool_drvinfo *info)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + struct prueth *prueth = emac->prueth;
>> +
>> + strscpy(info->driver, dev_driver_string(prueth->dev),
>> + sizeof(info->driver));
>> + strscpy(info->bus_info, dev_name(prueth->dev), sizeof(info->bus_info));
>> +}
>> +
>> +static u32 emac_get_msglevel(struct net_device *ndev)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> +
>> + return emac->msg_enable;
>> +}
>> +
>> +static void emac_set_msglevel(struct net_device *ndev, u32 value)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> +
>> + emac->msg_enable = value;
>> +}
>> +
>> +static int emac_get_link_ksettings(struct net_device *ndev,
>> + struct ethtool_link_ksettings *ecmd)
>> +{
>> + return phy_ethtool_get_link_ksettings(ndev, ecmd);
>> +}
>> +
>> +static int emac_set_link_ksettings(struct net_device *ndev,
>> + const struct ethtool_link_ksettings *ecmd)
>> +{
>> + return phy_ethtool_set_link_ksettings(ndev, ecmd);
>> +}
>> +
>> +static int emac_get_eee(struct net_device *ndev, struct ethtool_eee *edata)
>> +{
>> + if (!ndev->phydev)
>> + return -EOPNOTSUPP;
>> +
>> + return phy_ethtool_get_eee(ndev->phydev, edata);
>> +}
>> +
>> +static int emac_set_eee(struct net_device *ndev, struct ethtool_eee *edata)
>> +{
>> + if (!ndev->phydev)
>> + return -EOPNOTSUPP;
>> +
>> + return phy_ethtool_set_eee(ndev->phydev, edata);
>> +}
>> +
>> +static int emac_nway_reset(struct net_device *ndev)
>> +{
>> + return phy_ethtool_nway_reset(ndev);
>> +}
>> +
>> +static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
>> +#define EMAC_PRIV_IET_FRAME_PREEMPTION BIT(0)
>> + "iet-frame-preemption",
>> +#define EMAC_PRIV_IET_MAC_VERIFY BIT(1)
>> + "iet-mac-verify",
>> +};
>
> Please move the #define outside of the array. They are not easy to
> see.
>
Sure, I'll move the #define to outside of the array.
This is how the structure would look like.
#define EMAC_PRIV_IET_FRAME_PREEMPTION BIT(0)
#define EMAC_PRIV_IET_MAC_VERIFY BIT(1)
static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
"iet-frame-preemption",
"iet-mac-verify",
};
> Andrew
>
Thanks and Regards,
Danish.
> From mboxrd@z Thu Jan 1 00:00:00 1970
> Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@...ts.infradead.org>
> X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
> aws-us-west-2-korg-lkml-1.web.codeaurora.org
> Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133])
> (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
> (No client certificate requested)
> by smtp.lore.kernel.org (Postfix) with ESMTPS id 13488C43334
> for <linux-arm-kernel@...hiver.kernel.org>; Sun, 5 Jun 2022 15:39:36 +0000 (UTC)
> DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
> d=lists.infradead.org; s=bombadil.20210309; h=Sender:
> Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post:
> List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References:
> Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description:
> Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:
> List-Owner; bh=b6fYa0q+XFwyIpbdKM0aAD9nKwyDSWVpkOMmA80Mzq4=; b=olQyG9xAfPyO0y
> vAK24MXpqlDj0lAj5hChVz0fLkJgC4quh9pGM4/44+YhRgd1I37AGAAlyVHxayUECyFmLPbOhXAhA
> iZbsNjL7uAcqj7t3J+dBL3BRQmgKGBpwEak18gYG7V+OnAOCvaQ3w+ccsYql0mlf96tMNK+JZTyZa
> qZdylMVGr8FKMbIFRyVZiE9wGsw0hLwZ64vIHOjs5SCqA8B6Qnq5AaXmpXLxLXgwj3IYg6IUIo3TP
> vFopdmNaVDm5xSbpMAQxrt49ita2lUHEzV41GfNocGgs3vSkn1T4uViaDIY5+mOwoOjDfK7lm3D1h
> LpsUsHl9aE5HlG5hMehA==;
> Received: from localhost ([::1] helo=bombadil.infradead.org)
> by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux))
> id 1nxsKN-00ElzW-35; Sun, 05 Jun 2022 15:38:07 +0000
> Received: from vps0.lunn.ch ([185.16.172.187])
> by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux))
> id 1nxsKH-00ElyS-AH
> for linux-arm-kernel@...ts.infradead.org; Sun, 05 Jun 2022 15:38:05 +0000
> DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lunn.ch;
> s=20171124; h=In-Reply-To:Content-Disposition:Content-Type:MIME-Version:
> References:Message-ID:Subject:Cc:To:From:Date:From:Sender:Reply-To:Subject:
> Date:Message-ID:To:Cc:MIME-Version:Content-Type:Content-Transfer-Encoding:
> Content-ID:Content-Description:Content-Disposition:In-Reply-To:References;
> bh=fage9o/WkrlxF6CHaFSVzs3PXs0ms4frqc7xdvWybXY=; b=Ld+ZYslRThTJYx7sMAt/vrjFI6
> IklFvvGj0QTnGKp/EkPLgktZvia+CIDqH9Imv+DaGiA5TyTs52f7vkeskXB7uj7d2HAOOmvf7NToQ
> nrLe9ZY8V0eos9i8IFGrSc3VLv6ivkVuHlzOCIqvXcDKoWtz9maiSDDZWQoAhLiDuS8o=;
> Received: from andrew by vps0.lunn.ch with local (Exim 4.94.2)
> (envelope-from <andrew@...n.ch>)
> id 1nxsKA-005eXu-EB; Sun, 05 Jun 2022 17:37:54 +0200
> Date: Sun, 5 Jun 2022 17:37:54 +0200
> From: Andrew Lunn <andrew@...n.ch>
> To: Puranjay Mohan <p-mohan@...com>
> Subject: Re: [PATCH v2 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
> Message-ID: <YpzN0u+hRgVuzPX9@...n.ch>
> References: <20220531095108.21757-1-p-mohan@...com>
> <20220531095108.21757-3-p-mohan@...com>
> MIME-Version: 1.0
> Content-Disposition: inline
> In-Reply-To: <20220531095108.21757-3-p-mohan@...com>
> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3
> X-CRM114-CacheID: sfid-20220605_083801_726047_1B97979E
> X-CRM114-Status: GOOD ( 26.73 )
> X-BeenThere: linux-arm-kernel@...ts.infradead.org
> X-Mailman-Version: 2.1.34
> Precedence: list
> List-Id: <linux-arm-kernel.lists.infradead.org>
> List-Unsubscribe: <http://lists.infradead.org/mailman/options/linux-arm-kernel>,
> <mailto:linux-arm-kernel-request@...ts.infradead.org?subject=unsubscribe>
> List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
> List-Post: <mailto:linux-arm-kernel@...ts.infradead.org>
> List-Help: <mailto:linux-arm-kernel-request@...ts.infradead.org?subject=help>
> List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-arm-kernel>,
> <mailto:linux-arm-kernel-request@...ts.infradead.org?subject=subscribe>
> Cc: nm@...com, devicetree@...r.kernel.org, grygorii.strashko@...com, vigneshr@...com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org, kishon@...com, rogerq@...nel.org, afd@...com, edumazet@...gle.com, robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org, ssantosh@...nel.org, davem@...emloft.net, linux-arm-kernel@...ts.infradead.org
> Content-Type: text/plain; charset="us-ascii"
> Content-Transfer-Encoding: 7bit
> Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@...ts.infradead.org>
> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@...ts.infradead.org
>
>> +static inline u32 addr_to_da0(const u8 *addr)
>> +{
>> + return (u32)(addr[0] | addr[1] << 8 |
>> + addr[2] << 16 | addr[3] << 24);
>> +};
>> +
>> +static inline u32 addr_to_da1(const u8 *addr)
>> +{
>> + return (u32)(addr[4] | addr[5] << 8);
>> +};
>
> No inline functions please.
>
>> +
>> +static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
>> + u16 start, u8 len)
>> +{
>> + u32 offset, val;
>> +
>> + offset = offs[slice].ft1_start_len;
>> + val = FT1_LEN(len) | FT1_START(start);
>> + regmap_write(miig_rt, offset, val);
>> +}
>> +
>> +static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
>> + int n, const u8 *addr)
>> +{
>> + u32 offset;
>> +
>> + offset = FT1_N_REG(slice, n, FT1_DA0);
>> + regmap_write(miig_rt, offset, addr_to_da0(addr));
>> + offset = FT1_N_REG(slice, n, FT1_DA1);
>> + regmap_write(miig_rt, offset, addr_to_da1(addr));
>> +}
>> +
>> +static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
>> + int n, const u8 *addr)
>> +{
>> + u32 offset;
>> +
>> + offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
>> + regmap_write(miig_rt, offset, addr_to_da0(addr));
>> + offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
>> + regmap_write(miig_rt, offset, addr_to_da1(addr));
>> +}
>> +
>> +static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int n,
>> + enum ft1_cfg_type type)
>> +{
>> + u32 offset;
>> +
>> + offset = offs[slice].ft1_cfg;
>> + regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
>> + type << FT1_CFG_SHIFT(n));
>> +}
>> +
>> +static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
>> + enum rx_class_sel_type type)
>> +{
>> + u32 offset;
>> +
>> + offset = offs[slice].rx_class_cfg1;
>> + regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
>> + type << RX_CLASS_SEL_SHIFT(n));
>> +}
>> +
>> +static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
>> + u32 data)
>> +{
>> + u32 offset;
>> +
>> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
>> + regmap_write(miig_rt, offset, data);
>> +}
>> +
>> +static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
>> + u32 data)
>> +{
>> + u32 offset;
>> +
>> + offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
>> + regmap_write(miig_rt, offset, data);
>> +}
>> +
>> +void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
>> +{
>> + regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
>> + regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
>> +}
>> +
>> +void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
>> +{
>> + regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
>> + regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
>> +}
>> +
>> +/* disable all RX traffic */
>> +void icssg_class_disable(struct regmap *miig_rt, int slice)
>> +{
>> + u32 data, offset;
>> + int n;
>> +
>> + /* Enable RX_L2_G */
>> + regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
>> + ICSSG_CFG_RX_L2_G_EN);
>> +
>> + for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++) {
>> + /* AND_EN = 0 */
>> + rx_class_set_and(miig_rt, slice, n, 0);
>> + /* OR_EN = 0 */
>> + rx_class_set_or(miig_rt, slice, n, 0);
>> +
>> + /* set CFG1 to OR */
>> + rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
>> +
>> + /* configure gate */
>> + offset = RX_CLASS_GATES_N_REG(slice, n);
>> + regmap_read(miig_rt, offset, &data);
>> + /* clear class_raw so we go through filters */
>> + data &= ~RX_CLASS_GATES_RAW_MASK;
>> + /* set allow and phase mask */
>> + data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
>> + regmap_write(miig_rt, offset, data);
>> + }
>> +
>> + /* FT1 Disabled */
>> + for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
>> + u8 addr[] = { 0, 0, 0, 0, 0, 0, };
>> +
>> + rx_class_ft1_cfg_set_type(miig_rt, slice, n,
>> + FT1_CFG_TYPE_DISABLED);
>> + rx_class_ft1_set_da(miig_rt, slice, n, addr);
>> + rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
>> + }
>> +
>> + /* clear CFG2 */
>> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
>> +}
>> +
>> +void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
>> +{
>> + int classifiers_in_use = 1;
>> + u32 data;
>> + int n;
>> +
>> + /* defaults */
>> + icssg_class_disable(miig_rt, slice);
>> +
>> + /* Setup Classifier */
>> + for (n = 0; n < classifiers_in_use; n++) {
>> + /* match on Broadcast or MAC_PRU address */
>> + data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
>> +
>> + /* multicast? */
>> + if (allmulti)
>> + data |= RX_CLASS_FT_MC;
>> +
>> + rx_class_set_or(miig_rt, slice, n, data);
>> +
>> + /* set CFG1 for OR_OR_AND for classifier */
>> + rx_class_sel_set_type(miig_rt, slice, n,
>> + RX_CLASS_SEL_TYPE_OR_OR_AND);
>> + }
>> +
>> + /* clear CFG2 */
>> + regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
>> +}
>> +
>> +/* required for SAV check */
>> +void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
>> +{
>> + u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
>> +
>> + rx_class_ft1_set_start_len(miig_rt, slice, 0, 6);
>> + rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
>> + rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
>> + rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg_config.c b/drivers/net/ethernet/ti/icssg_config.c
>> new file mode 100644
>> index 000000000000..a88ea4933802
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_config.c
>> @@ -0,0 +1,440 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
>> + */
>> +
>> +#include <linux/iopoll.h>
>> +#include <linux/regmap.h>
>> +#include <uapi/linux/if_ether.h>
>> +#include "icssg_config.h"
>> +#include "icssg_prueth.h"
>> +#include "icssg_switch_map.h"
>> +#include "icssg_mii_rt.h"
>> +
>> +/* TX IPG Values to be set for 100M link speed. These values are
>> + * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
>> + * h/w design.
>> + */
>> +
>> +/* IPG is in core_clk cycles */
>> +#define MII_RT_TX_IPG_100M 0x17
>> +#define MII_RT_TX_IPG_1G 0xb
>> +
>> +#define ICSSG_QUEUES_MAX 64
>> +#define ICSSG_QUEUE_OFFSET 0xd00
>> +#define ICSSG_QUEUE_PEEK_OFFSET 0xe00
>> +#define ICSSG_QUEUE_CNT_OFFSET 0xe40
>> +#define ICSSG_QUEUE_RESET_OFFSET 0xf40
>> +
>> +#define ICSSG_NUM_TX_QUEUES 8
>> +
>> +#define RECYCLE_Q_SLICE0 16
>> +#define RECYCLE_Q_SLICE1 17
>> +
>> +#define ICSSG_NUM_OTHER_QUEUES 5 /* port, host and special queues */
>> +
>> +#define PORT_HI_Q_SLICE0 32
>> +#define PORT_LO_Q_SLICE0 33
>> +#define HOST_HI_Q_SLICE0 34
>> +#define HOST_LO_Q_SLICE0 35
>> +#define HOST_SPL_Q_SLICE0 40 /* Special Queue */
>> +
>> +#define PORT_HI_Q_SLICE1 36
>> +#define PORT_LO_Q_SLICE1 37
>> +#define HOST_HI_Q_SLICE1 38
>> +#define HOST_LO_Q_SLICE1 39
>> +#define HOST_SPL_Q_SLICE1 41 /* Special Queue */
>> +
>> +#define MII_RXCFG_DEFAULT (PRUSS_MII_RT_RXCFG_RX_ENABLE | \
>> + PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
>> + PRUSS_MII_RT_RXCFG_RX_L2_EN | \
>> + PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
>> +
>> +#define MII_TXCFG_DEFAULT (PRUSS_MII_RT_TXCFG_TX_ENABLE | \
>> + PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
>> + PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
>> + PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
>> +
>> +#define ICSSG_CFG_DEFAULT (ICSSG_CFG_TX_L1_EN | \
>> + ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
>> + ICSSG_CFG_TX_PRU_EN | \
>> + ICSSG_CFG_SGMII_MODE)
>> +
>> +#define FDB_GEN_CFG1 0x60
>> +#define SMEM_VLAN_OFFSET 8
>> +#define SMEM_VLAN_OFFSET_MASK GENMASK(25, 8)
>> +
>> +#define FDB_GEN_CFG2 0x64
>> +#define FDB_VLAN_EN BIT(6)
>> +#define FDB_HOST_EN BIT(2)
>> +#define FDB_PRU1_EN BIT(1)
>> +#define FDB_PRU0_EN BIT(0)
>> +#define FDB_EN_ALL (FDB_PRU0_EN | FDB_PRU1_EN | \
>> + FDB_HOST_EN | FDB_VLAN_EN)
>> +
>> +struct map {
>> + int queue;
>> + u32 pd_addr_start;
>> + u32 flags;
>> + bool special;
>> +};
>> +
>> +struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
>> + {
>> + { PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
>> + { PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
>> + { HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
>> + { HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
>> + { HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
>> + },
>> + {
>> + { PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
>> + { PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
>> + { HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
>> + { HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
>> + { HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
>> + },
>> +};
>> +
>> +static void icssg_config_mii_init(struct prueth_emac *emac)
>> +{
>> + struct prueth *prueth = emac->prueth;
>> + struct regmap *mii_rt = prueth->mii_rt;
>> + int slice = prueth_emac_slice(emac);
>> + u32 rxcfg_reg, txcfg_reg, pcnt_reg;
>> + u32 rxcfg, txcfg;
>> +
>> + rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 :
>> + PRUSS_MII_RT_RXCFG1;
>> + txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
>> + PRUSS_MII_RT_TXCFG1;
>> + pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
>> + PRUSS_MII_RT_RX_PCNT1;
>> +
>> + rxcfg = MII_RXCFG_DEFAULT;
>> + txcfg = MII_TXCFG_DEFAULT;
>> +
>> + if (slice == ICSS_MII1)
>> + rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL;
>> +
>> + /* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need
>> + * to be swapped also comparing to RGMII mode.
>> + */
>> + if (emac->phy_if == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
>> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
>> + else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
>> + txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
>> +
>> + regmap_write(mii_rt, rxcfg_reg, rxcfg);
>> + regmap_write(mii_rt, txcfg_reg, txcfg);
>> + regmap_write(mii_rt, pcnt_reg, 0x1);
>> +}
>> +
>> +static void icssg_miig_queues_init(struct prueth *prueth, int slice)
>> +{
>> + struct regmap *miig_rt = prueth->miig_rt;
>> + void __iomem *smem = prueth->shram.va;
>> + u8 pd[ICSSG_SPECIAL_PD_SIZE];
>> + int queue = 0, i, j;
>> + u32 *pdword;
>> +
>> + /* reset hwqueues */
>> + if (slice)
>> + queue = ICSSG_NUM_TX_QUEUES;
>> +
>> + for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
>> + queue++;
>> + }
>> +
>> + queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
>> +
>> + for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
>> + regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
>> + hwq_map[slice][i].queue);
>> + }
>> +
>> + /* initialize packet descriptors in SMEM */
>> + /* push pakcet descriptors to hwqueues */
>> +
>> + pdword = (u32 *)pd;
>> + for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
>> + struct map *mp;
>> + int pd_size, num_pds;
>> + u32 pdaddr;
>> +
>> + mp = &hwq_map[slice][j];
>> + if (mp->special) {
>> + pd_size = ICSSG_SPECIAL_PD_SIZE;
>> + num_pds = ICSSG_NUM_SPECIAL_PDS;
>> + } else {
>> + pd_size = ICSSG_NORMAL_PD_SIZE;
>> + num_pds = ICSSG_NUM_NORMAL_PDS;
>> + }
>> +
>> + for (i = 0; i < num_pds; i++) {
>> + memset(pd, 0, pd_size);
>> +
>> + pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
>> + pdword[0] |= cpu_to_le32(mp->flags);
>> + pdaddr = mp->pd_addr_start + i * pd_size;
>> +
>> + memcpy_toio(smem + pdaddr, pd, pd_size);
>> + queue = mp->queue;
>> + regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
>> + pdaddr);
>> + }
>> + }
>> +}
>> +
>> +void icssg_config_ipg(struct prueth_emac *emac)
>> +{
>> + struct prueth *prueth = emac->prueth;
>> + int slice = prueth_emac_slice(emac);
>> +
>> + switch (emac->speed) {
>> + case SPEED_1000:
>> + icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
>> + break;
>> + case SPEED_100:
>> + icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
>> + break;
>> + default:
>> + /* Other links speeds not supported */
>> + netdev_err(emac->ndev, "Unsupported link speed\n");
>> + return;
>> + }
>> +}
>> +
>> +static void emac_r30_cmd_init(struct prueth_emac *emac)
>> +{
>> + int i;
>> + struct icssg_r30_cmd *p;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + for (i = 0; i < 4; i++)
>> + writel(EMAC_NONE, &p->cmd[i]);
>> +}
>> +
>> +static int emac_r30_is_done(struct prueth_emac *emac)
>> +{
>> + const struct icssg_r30_cmd *p;
>> + int i;
>> + u32 cmd;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + for (i = 0; i < 4; i++) {
>> + cmd = readl(&p->cmd[i]);
>> + if (cmd != EMAC_NONE)
>> + return 0;
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +static int prueth_emac_buffer_setup(struct prueth_emac *emac)
>> +{
>> + struct icssg_buffer_pool_cfg *bpool_cfg;
>> + struct prueth *prueth = emac->prueth;
>> + int slice = prueth_emac_slice(emac);
>> + struct icssg_rxq_ctx *rxq_ctx;
>> + u32 addr;
>> + int i;
>> +
>> + /* Layout to have 64KB aligned buffer pool
>> + * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
>> + */
>> +
>> + addr = lower_32_bits(prueth->msmcram.pa);
>> + if (slice)
>> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
>> +
>> + if (addr % SZ_64K) {
>> + dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
>> + return -EINVAL;
>> + }
>> +
>> + bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET;
>> + /* workaround for f/w bug. bpool 0 needs to be initilalized */
>> + bpool_cfg[0].addr = cpu_to_le32(addr);
>> + bpool_cfg[0].len = 0;
>> +
>> + for (i = PRUETH_EMAC_BUF_POOL_START;
>> + i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
>> + i++) {
>> + bpool_cfg[i].addr = cpu_to_le32(addr);
>> + bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
>> + addr += PRUETH_EMAC_BUF_POOL_SIZE;
>> + }
>> +
>> + if (!slice)
>> + addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
>> + else
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
>> +
>> + /* Pre-emptible RX buffer queue */
>> + rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET;
>> + for (i = 0; i < 3; i++)
>> + rxq_ctx->start[i] = cpu_to_le32(addr);
>> +
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
>> + rxq_ctx->end = cpu_to_le32(addr);
>> +
>> + /* Express RX buffer queue */
>> + rxq_ctx = emac->dram.va + HOST_RX_Q_EXP_CONTEXT_OFFSET;
>> + for (i = 0; i < 3; i++)
>> + rxq_ctx->start[i] = cpu_to_le32(addr);
>> +
>> + addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
>> + rxq_ctx->end = cpu_to_le32(addr);
>> +
>> + return 0;
>> +}
>> +
>> +static void icssg_init_emac_mode(struct prueth *prueth)
>> +{
>> + /* When the device is configured as a bridge and it is being brought back
>> + * to the emac mode, the host mac address has to be set as 0.
>> + */
>> + u8 mac[ETH_ALEN] = { 0 };
>> +
>> + if (prueth->emacs_initialized)
>> + return;
>> +
>> + regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, 0);
>> + regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
>> + /* Clear host MAC address */
>> + icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
>> +}
>> +
>> +int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
>> +{
>> + void *config = emac->dram.va + ICSSG_CONFIG_OFFSET;
>> + u8 *cfg_byte_ptr = config;
>> + struct icssg_flow_cfg *flow_cfg;
>> + u32 mask;
>> + int ret;
>> +
>> + icssg_init_emac_mode(prueth);
>> +
>> + memset_io(config, 0, TAS_GATE_MASK_LIST0);
>> + icssg_miig_queues_init(prueth, slice);
>> +
>> + emac->speed = SPEED_1000;
>> + emac->duplex = DUPLEX_FULL;
>> + if (!phy_interface_mode_is_rgmii(emac->phy_if)) {
>> + emac->speed = SPEED_100;
>> + emac->duplex = DUPLEX_FULL;
>> + }
>> + regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
>> + icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
>> + icssg_config_mii_init(emac);
>> + icssg_config_ipg(emac);
>> + icssg_update_rgmii_cfg(prueth->miig_rt, emac);
>> +
>> + /* set GPI mode */
>> + pruss_cfg_gpimode(prueth->pruss, prueth->pru_id[slice],
>> + PRUSS_GPI_MODE_MII);
>> +
>> + /* enable XFR shift for PRU and RTU */
>> + mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
>> + pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
>> +
>> + /* set C28 to 0x100 */
>> + pru_rproc_set_ctable(prueth->pru[slice], PRU_C28, 0x100 << 8);
>> + pru_rproc_set_ctable(prueth->rtu[slice], PRU_C28, 0x100 << 8);
>> + pru_rproc_set_ctable(prueth->txpru[slice], PRU_C28, 0x100 << 8);
>> +
>> + flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
>> + flow_cfg->rx_base_flow = cpu_to_le32(emac->rx_flow_id_base);
>> + flow_cfg->mgm_base_flow = 0;
>> + *(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
>> + *(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
>> +
>> + ret = prueth_emac_buffer_setup(emac);
>> + if (ret)
>> + return ret;
>> +
>> + emac_r30_cmd_init(emac);
>> +
>> + return 0;
>> +}
>> +
>> +static struct icssg_r30_cmd emac_r32_bitmask[] = {
>> + {{0xffff0004, 0xffff0100, 0xffff0100, EMAC_NONE}}, /* EMAC_PORT_DISABLE */
>> + {{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}}, /* EMAC_PORT_BLOCK */
>> + {{0xffbb0000, 0xfcff0000, 0xdcff0000, EMAC_NONE}}, /* EMAC_PORT_FORWARD */
>> + {{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}}, /* EMAC_PORT_FORWARD_WO_LEARNING */
>> + {{0xffff0001, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT ALL */
>> + {{0xfffe0002, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT TAGGED */
>> + {{0xfffc0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* ACCEPT UNTAGGED and PRIO */
>> + {{EMAC_NONE, 0xffff0020, EMAC_NONE, EMAC_NONE}}, /* TAS Trigger List change */
>> + {{EMAC_NONE, 0xdfff1000, EMAC_NONE, EMAC_NONE}}, /* TAS set state ENABLE*/
>> + {{EMAC_NONE, 0xefff2000, EMAC_NONE, EMAC_NONE}}, /* TAS set state RESET*/
>> + {{EMAC_NONE, 0xcfff0000, EMAC_NONE, EMAC_NONE}}, /* TAS set state DISABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xffff0400, EMAC_NONE}}, /* UC flooding ENABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xfbff0000, EMAC_NONE}}, /* UC flooding DISABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xffff0800, EMAC_NONE}}, /* MC flooding ENABLE*/
>> + {{EMAC_NONE, EMAC_NONE, 0xf7ff0000, EMAC_NONE}}, /* MC flooding DISABLE*/
>> + {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>> + {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>> + {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>> +};
>> +
>> +int emac_set_port_state(struct prueth_emac *emac,
>> + enum icssg_port_state_cmd cmd)
>> +{
>> + struct icssg_r30_cmd *p;
>> + int ret = -ETIMEDOUT;
>> + int done = 0;
>> + int i;
>> +
>> + p = emac->dram.va + MGR_R30_CMD_OFFSET;
>> +
>> + if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
>> + netdev_err(emac->ndev, "invalid port command\n");
>> + return -EINVAL;
>> + }
>> +
>> + /* only one command at a time allowed to firmware */
>> + mutex_lock(&emac->cmd_lock);
>> +
>> + for (i = 0; i < 4; i++)
>> + writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
>> +
>> + /* wait for done */
>> + ret = read_poll_timeout(emac_r30_is_done, done, done == 1,
>> + 1000, 10000, false, emac);
>> +
>> + if (ret == -ETIMEDOUT)
>> + netdev_err(emac->ndev, "timeout waiting for command done\n");
>> +
>> + mutex_unlock(&emac->cmd_lock);
>> +
>> + return ret;
>> +}
>> +
>> +void icssg_config_set_speed(struct prueth_emac *emac)
>> +{
>> + u8 fw_speed;
>> +
>> + switch (emac->speed) {
>> + case SPEED_1000:
>> + fw_speed = FW_LINK_SPEED_1G;
>> + break;
>> + case SPEED_100:
>> + fw_speed = FW_LINK_SPEED_100M;
>> + break;
>> + default:
>> + /* Other links speeds not supported */
>> + netdev_err(emac->ndev, "Unsupported link speed\n");
>> + return;
>> + }
>> +
>> + writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
>> +}
>> diff --git a/drivers/net/ethernet/ti/icssg_config.h b/drivers/net/ethernet/ti/icssg_config.h
>> new file mode 100644
>> index 000000000000..43eb0922172a
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_config.h
>> @@ -0,0 +1,200 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/* Texas Instruments ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
>> + *
>> + */
>> +
>> +#ifndef __NET_TI_ICSSG_CONFIG_H
>> +#define __NET_TI_ICSSG_CONFIG_H
>> +
>> +struct icssg_buffer_pool_cfg {
>> + __le32 addr;
>> + __le32 len;
>> +} __packed;
>> +
>> +struct icssg_flow_cfg {
>> + __le16 rx_base_flow;
>> + __le16 mgm_base_flow;
>> +} __packed;
>> +
>> +#define PRUETH_PKT_TYPE_CMD 0x10
>> +#define PRUETH_NAV_PS_DATA_SIZE 16 /* Protocol specific data size */
>> +#define PRUETH_NAV_SW_DATA_SIZE 16 /* SW related data size */
>> +#define PRUETH_MAX_TX_DESC 512
>> +#define PRUETH_MAX_RX_DESC 512
>> +#define PRUETH_MAX_RX_FLOWS 1 /* excluding default flow */
>> +#define PRUETH_RX_FLOW_DATA 0
>> +
>> +#define PRUETH_EMAC_BUF_POOL_SIZE SZ_8K
>> +#define PRUETH_EMAC_POOLS_PER_SLICE 24
>> +#define PRUETH_EMAC_BUF_POOL_START 8
>> +#define PRUETH_NUM_BUF_POOLS 8
>> +#define PRUETH_EMAC_RX_CTX_BUF_SIZE SZ_16K /* per slice */
>> +#define MSMC_RAM_SIZE \
>> + (2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
>> + PRUETH_EMAC_RX_CTX_BUF_SIZE * 2))
>> +
>> +struct icssg_rxq_ctx {
>> + __le32 start[3];
>> + __le32 end;
>> +} __packed;
>> +
>> +/* Load time Fiwmware Configuration */
>> +
>> +#define ICSSG_FW_MGMT_CMD_HEADER 0x81
>> +#define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03
>> +#define ICSSG_FW_MGMT_CMD_TYPE 0x04
>> +#define ICSSG_FW_MGMT_PKT 0x80000000
>> +
>> +struct icssg_r30_cmd {
>> + u32 cmd[4];
>> +} __packed;
>> +
>> +enum icssg_port_state_cmd {
>> + ICSSG_EMAC_PORT_DISABLE = 0,
>> + ICSSG_EMAC_PORT_BLOCK,
>> + ICSSG_EMAC_PORT_FORWARD,
>> + ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
>> + ICSSG_EMAC_PORT_ACCEPT_ALL,
>> + ICSSG_EMAC_PORT_ACCEPT_TAGGED,
>> + ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
>> + ICSSG_EMAC_PORT_TAS_TRIGGER,
>> + ICSSG_EMAC_PORT_TAS_ENABLE,
>> + ICSSG_EMAC_PORT_TAS_RESET,
>> + ICSSG_EMAC_PORT_TAS_DISABLE,
>> + ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
>> + ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
>> + ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
>> + ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
>> + ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
>> + ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>> + ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>> + ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>> + ICSSG_EMAC_PORT_MAX_COMMANDS
>> +};
>> +
>> +#define EMAC_NONE 0xffff0000
>> +#define EMAC_PRU0_P_DI 0xffff0004
>> +#define EMAC_PRU1_P_DI 0xffff0040
>> +#define EMAC_TX_P_DI 0xffff0100
>> +
>> +#define EMAC_PRU0_P_EN 0xfffb0000
>> +#define EMAC_PRU1_P_EN 0xffbf0000
>> +#define EMAC_TX_P_EN 0xfeff0000
>> +
>> +#define EMAC_P_BLOCK 0xffff0040
>> +#define EMAC_TX_P_BLOCK 0xffff0200
>> +#define EMAC_P_UNBLOCK 0xffbf0000
>> +#define EMAC_TX_P_UNBLOCK 0xfdff0000
>> +#define EMAC_LEAN_EN 0xfff70000
>> +#define EMAC_LEAN_DI 0xffff0008
>> +
>> +#define EMAC_ACCEPT_ALL 0xffff0001
>> +#define EMAC_ACCEPT_TAG 0xfffe0002
>> +#define EMAC_ACCEPT_PRIOR 0xfffc0000
>> +
>> +/* Config area lies in DRAM */
>> +#define ICSSG_CONFIG_OFFSET 0x0
>> +
>> +/* Config area lies in shared RAM */
>> +#define ICSSG_CONFIG_OFFSET_SLICE0 0
>> +#define ICSSG_CONFIG_OFFSET_SLICE1 0x8000
>> +
>> +#define ICSSG_NUM_NORMAL_PDS 64
>> +#define ICSSG_NUM_SPECIAL_PDS 16
>> +
>> +#define ICSSG_NORMAL_PD_SIZE 8
>> +#define ICSSG_SPECIAL_PD_SIZE 20
>> +
>> +#define ICSSG_FLAG_MASK 0xff00ffff
>> +
>> +struct icssg_setclock_desc {
>> + u8 request;
>> + u8 restore;
>> + u8 acknowledgment;
>> + u8 cmp_status;
>> + u32 margin;
>> + u32 cyclecounter0_set;
>> + u32 cyclecounter1_set;
>> + u32 iepcount_set;
>> + u32 rsvd1;
>> + u32 rsvd2;
>> + u32 CMP0_current;
>> + u32 iepcount_current;
>> + u32 difference;
>> + u32 cyclecounter0_new;
>> + u32 cyclecounter1_new;
>> + u32 CMP0_new;
>> +} __packed;
>> +
>> +#define ICSSG_CMD_POP_SLICE0 56
>> +#define ICSSG_CMD_POP_SLICE1 60
>> +
>> +#define ICSSG_CMD_PUSH_SLICE0 57
>> +#define ICSSG_CMD_PUSH_SLICE1 61
>> +
>> +#define ICSSG_RSP_POP_SLICE0 58
>> +#define ICSSG_RSP_POP_SLICE1 62
>> +
>> +#define ICSSG_RSP_PUSH_SLICE0 56
>> +#define ICSSG_RSP_PUSH_SLICE1 60
>> +
>> +#define ICSSG_TS_POP_SLICE0 59
>> +#define ICSSG_TS_POP_SLICE1 63
>> +
>> +#define ICSSG_TS_PUSH_SLICE0 40
>> +#define ICSSG_TS_PUSH_SLICE1 41
>> +
>> +/* FDB FID_C2 flag definitions */
>> +/* Indicates host port membership.*/
>> +#define ICSSG_FDB_ENTRY_P0_MEMBERSHIP BIT(0)
>> +/* Indicates that MAC ID is connected to physical port 1 */
>> +#define ICSSG_FDB_ENTRY_P1_MEMBERSHIP BIT(1)
>> +/* Indicates that MAC ID is connected to physical port 2 */
>> +#define ICSSG_FDB_ENTRY_P2_MEMBERSHIP BIT(2)
>> +/* Ageable bit is set for learned entries and cleared for static entries */
>> +#define ICSSG_FDB_ENTRY_AGEABLE BIT(3)
>> +/* If set for DA then packet is determined to be a special packet */
>> +#define ICSSG_FDB_ENTRY_BLOCK BIT(4)
>> +/* If set for DA then the SA from the packet is not learned */
>> +#define ICSSG_FDB_ENTRY_SECURE BIT(5)
>> +/* If set, it means packet has been seen recently with source address + FID
>> + * matching MAC address/FID of entry
>> + */
>> +#define ICSSG_FDB_ENTRY_TOUCHED BIT(6)
>> +/* Set if entry is valid */
>> +#define ICSSG_FDB_ENTRY_VALID BIT(7)
>> +
>> +/**
>> + * struct prueth_vlan_tbl - VLAN table entries struct in ICSSG SMEM
>> + * @fid_c1: membership and forwarding rules flag to this table. See
>> + * above to defines for bit definitions
>> + * @fid: FDB index for this VID (there is 1-1 mapping b/w VID and FID)
>> + */
>> +struct prueth_vlan_tbl {
>> + u8 fid_c1;
>> + u8 fid;
>> +} __packed;
>> +
>> +/**
>> + * struct prueth_fdb_slot - Result of FDB slot lookup
>> + * @mac: MAC address
>> + * @fid: fid to be associated with MAC
>> + * @fid_c2: FID_C2 entry for this MAC
>> + */
>> +struct prueth_fdb_slot {
>> + u8 mac[ETH_ALEN];
>> + u8 fid;
>> + u8 fid_c2;
>> +} __packed;
>> +
>> +enum icssg_ietfpe_verify_states {
>> + ICSSG_IETFPE_STATE_UNKNOWN = 0,
>> + ICSSG_IETFPE_STATE_INITIAL,
>> + ICSSG_IETFPE_STATE_VERIFYING,
>> + ICSSG_IETFPE_STATE_SUCCEEDED,
>> + ICSSG_IETFPE_STATE_FAILED,
>> + ICSSG_IETFPE_STATE_DISABLED
>> +};
>> +#endif /* __NET_TI_ICSSG_CONFIG_H */
>> diff --git a/drivers/net/ethernet/ti/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg_ethtool.c
>> new file mode 100644
>> index 000000000000..fd09d223b0ae
>> --- /dev/null
>> +++ b/drivers/net/ethernet/ti/icssg_ethtool.c
>> @@ -0,0 +1,319 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* Texas Instruments ICSSG Ethernet driver
>> + *
>> + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
>> + *
>> + */
>> +
>> +#include "icssg_prueth.h"
>> +#include <linux/regmap.h>
>> +
>> +static u32 stats_base[] = { 0x54c, /* Slice 0 stats start */
>> + 0xb18, /* Slice 1 stats start */
>> +};
>> +
>> +struct miig_stats_regs {
>> + /* Rx */
>> + u32 rx_good_frames;
>> + u32 rx_broadcast_frames;
>> + u32 rx_multicast_frames;
>> + u32 rx_crc_error_frames;
>> + u32 rx_mii_error_frames;
>> + u32 rx_odd_nibble_frames;
>> + u32 rx_frame_max_size;
>> + u32 rx_max_size_error_frames;
>> + u32 rx_frame_min_size;
>> + u32 rx_min_size_error_frames;
>> + u32 rx_overrun_frames;
>> + u32 rx_class0_hits;
>> + u32 rx_class1_hits;
>> + u32 rx_class2_hits;
>> + u32 rx_class3_hits;
>> + u32 rx_class4_hits;
>> + u32 rx_class5_hits;
>> + u32 rx_class6_hits;
>> + u32 rx_class7_hits;
>> + u32 rx_class8_hits;
>> + u32 rx_class9_hits;
>> + u32 rx_class10_hits;
>> + u32 rx_class11_hits;
>> + u32 rx_class12_hits;
>> + u32 rx_class13_hits;
>> + u32 rx_class14_hits;
>> + u32 rx_class15_hits;
>> + u32 rx_smd_frags;
>> + u32 rx_bucket1_size;
>> + u32 rx_bucket2_size;
>> + u32 rx_bucket3_size;
>> + u32 rx_bucket4_size;
>> + u32 rx_64B_frames;
>> + u32 rx_bucket1_frames;
>> + u32 rx_bucket2_frames;
>> + u32 rx_bucket3_frames;
>> + u32 rx_bucket4_frames;
>> + u32 rx_bucket5_frames;
>> + u32 rx_total_bytes;
>> + u32 rx_tx_total_bytes;
>> + /* Tx */
>> + u32 tx_good_frames;
>> + u32 tx_broadcast_frames;
>> + u32 tx_multicast_frames;
>> + u32 tx_odd_nibble_frames;
>> + u32 tx_underflow_errors;
>> + u32 tx_frame_max_size;
>> + u32 tx_max_size_error_frames;
>> + u32 tx_frame_min_size;
>> + u32 tx_min_size_error_frames;
>> + u32 tx_bucket1_size;
>> + u32 tx_bucket2_size;
>> + u32 tx_bucket3_size;
>> + u32 tx_bucket4_size;
>> + u32 tx_64B_frames;
>> + u32 tx_bucket1_frames;
>> + u32 tx_bucket2_frames;
>> + u32 tx_bucket3_frames;
>> + u32 tx_bucket4_frames;
>> + u32 tx_bucket5_frames;
>> + u32 tx_total_bytes;
>> +};
>> +
>> +#define ICSSG_STATS(field) \
>> +{ \
>> + #field, \
>> + offsetof(struct miig_stats_regs, field), \
>> +}
>> +
>> +struct icssg_stats {
>> + char name[ETH_GSTRING_LEN];
>> + u32 offset;
>> +};
>> +
>> +static const struct icssg_stats icssg_ethtool_stats[] = {
>> + /* Rx */
>> + ICSSG_STATS(rx_good_frames),
>> + ICSSG_STATS(rx_broadcast_frames),
>> + ICSSG_STATS(rx_multicast_frames),
>> + ICSSG_STATS(rx_crc_error_frames),
>> + ICSSG_STATS(rx_mii_error_frames),
>> + ICSSG_STATS(rx_odd_nibble_frames),
>> + ICSSG_STATS(rx_frame_max_size),
>> + ICSSG_STATS(rx_max_size_error_frames),
>> + ICSSG_STATS(rx_frame_min_size),
>> + ICSSG_STATS(rx_min_size_error_frames),
>> + ICSSG_STATS(rx_overrun_frames),
>> + ICSSG_STATS(rx_class0_hits),
>> + ICSSG_STATS(rx_class1_hits),
>> + ICSSG_STATS(rx_class2_hits),
>> + ICSSG_STATS(rx_class3_hits),
>> + ICSSG_STATS(rx_class4_hits),
>> + ICSSG_STATS(rx_class5_hits),
>> + ICSSG_STATS(rx_class6_hits),
>> + ICSSG_STATS(rx_class7_hits),
>> + ICSSG_STATS(rx_class8_hits),
>> + ICSSG_STATS(rx_class9_hits),
>> + ICSSG_STATS(rx_class10_hits),
>> + ICSSG_STATS(rx_class11_hits),
>> + ICSSG_STATS(rx_class12_hits),
>> + ICSSG_STATS(rx_class13_hits),
>> + ICSSG_STATS(rx_class14_hits),
>> + ICSSG_STATS(rx_class15_hits),
>> + ICSSG_STATS(rx_smd_frags),
>> + ICSSG_STATS(rx_bucket1_size),
>> + ICSSG_STATS(rx_bucket2_size),
>> + ICSSG_STATS(rx_bucket3_size),
>> + ICSSG_STATS(rx_bucket4_size),
>> + ICSSG_STATS(rx_64B_frames),
>> + ICSSG_STATS(rx_bucket1_frames),
>> + ICSSG_STATS(rx_bucket2_frames),
>> + ICSSG_STATS(rx_bucket3_frames),
>> + ICSSG_STATS(rx_bucket4_frames),
>> + ICSSG_STATS(rx_bucket5_frames),
>> + ICSSG_STATS(rx_total_bytes),
>> + ICSSG_STATS(rx_tx_total_bytes),
>> + /* Tx */
>> + ICSSG_STATS(tx_good_frames),
>> + ICSSG_STATS(tx_broadcast_frames),
>> + ICSSG_STATS(tx_multicast_frames),
>> + ICSSG_STATS(tx_odd_nibble_frames),
>> + ICSSG_STATS(tx_underflow_errors),
>> + ICSSG_STATS(tx_frame_max_size),
>> + ICSSG_STATS(tx_max_size_error_frames),
>> + ICSSG_STATS(tx_frame_min_size),
>> + ICSSG_STATS(tx_min_size_error_frames),
>> + ICSSG_STATS(tx_bucket1_size),
>> + ICSSG_STATS(tx_bucket2_size),
>> + ICSSG_STATS(tx_bucket3_size),
>> + ICSSG_STATS(tx_bucket4_size),
>> + ICSSG_STATS(tx_64B_frames),
>> + ICSSG_STATS(tx_bucket1_frames),
>> + ICSSG_STATS(tx_bucket2_frames),
>> + ICSSG_STATS(tx_bucket3_frames),
>> + ICSSG_STATS(tx_bucket4_frames),
>> + ICSSG_STATS(tx_bucket5_frames),
>> + ICSSG_STATS(tx_total_bytes),
>> +};
>> +
>> +static void emac_get_drvinfo(struct net_device *ndev,
>> + struct ethtool_drvinfo *info)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> + struct prueth *prueth = emac->prueth;
>> +
>> + strscpy(info->driver, dev_driver_string(prueth->dev),
>> + sizeof(info->driver));
>> + strscpy(info->bus_info, dev_name(prueth->dev), sizeof(info->bus_info));
>> +}
>> +
>> +static u32 emac_get_msglevel(struct net_device *ndev)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> +
>> + return emac->msg_enable;
>> +}
>> +
>> +static void emac_set_msglevel(struct net_device *ndev, u32 value)
>> +{
>> + struct prueth_emac *emac = netdev_priv(ndev);
>> +
>> + emac->msg_enable = value;
>> +}
>> +
>> +static int emac_get_link_ksettings(struct net_device *ndev,
>> + struct ethtool_link_ksettings *ecmd)
>> +{
>> + return phy_ethtool_get_link_ksettings(ndev, ecmd);
>> +}
>> +
>> +static int emac_set_link_ksettings(struct net_device *ndev,
>> + const struct ethtool_link_ksettings *ecmd)
>> +{
>> + return phy_ethtool_set_link_ksettings(ndev, ecmd);
>> +}
>> +
>> +static int emac_get_eee(struct net_device *ndev, struct ethtool_eee *edata)
>> +{
>> + if (!ndev->phydev)
>> + return -EOPNOTSUPP;
>> +
>> + return phy_ethtool_get_eee(ndev->phydev, edata);
>> +}
>> +
>> +static int emac_set_eee(struct net_device *ndev, struct ethtool_eee *edata)
>> +{
>> + if (!ndev->phydev)
>> + return -EOPNOTSUPP;
>> +
>> + return phy_ethtool_set_eee(ndev->phydev, edata);
>> +}
>> +
>> +static int emac_nway_reset(struct net_device *ndev)
>> +{
>> + return phy_ethtool_nway_reset(ndev);
>> +}
>> +
>> +static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
>> +#define EMAC_PRIV_IET_FRAME_PREEMPTION BIT(0)
>> + "iet-frame-preemption",
>> +#define EMAC_PRIV_IET_MAC_VERIFY BIT(1)
>> + "iet-mac-verify",
>> +};
>
> Please move the #define outside of the array. They are not easy to
> see.
>
> Andrew
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Powered by blists - more mailing lists