[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221118090306.48022-1-tirthendu.sarkar@intel.com>
Date: Fri, 18 Nov 2022 14:33:06 +0530
From: Tirthendu Sarkar <tirthendu.sarkar@...el.com>
To: tirtha@...il.com, magnus.karlsson@...el.com,
intel-wired-lan@...ts.osuosl.org, anthony.l.nguyen@...el.com,
maciej.fijalkowski@...el.com
Cc: netdev@...r.kernel.org
Subject: [PATCH intel-next v4] i40e: allow toggling loopback mode via ndo_set_features callback
Add support for NETIF_F_LOOPBACK. This feature can be set via:
$ ethtool -K eth0 loopback <on|off>
This sets the MAC Tx->Rx loopback.
This feature is used for the xsk selftests, and might have other uses
too.
Changelog:
v3 -> v4:
- Removed unused %_LEGACY macros as suggested by Alexandr Lobakin.
- Modified checks for interface bringup and i40e_set_loopback().
- Propagating up return value from i40_set_loopback().
v2 -> v3:
- Fixed loopback macros as per NVM version 6.01+.
- Renamed existing macros as *_LEGACY.
- Based on NVM verison appropriate macro is used for MAC loopback.
v1 -> v2:
- Moved loopback to netdev's hardware features as suggested by
Alexandr Lobakin.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@...el.com>
---
.../net/ethernet/intel/i40e/i40e_adminq_cmd.h | 8 ++++--
drivers/net/ethernet/intel/i40e/i40e_common.c | 26 +++++++++++++++++
drivers/net/ethernet/intel/i40e/i40e_main.c | 28 ++++++++++++++++++-
.../net/ethernet/intel/i40e/i40e_prototype.h | 3 ++
4 files changed, 61 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 60f9e0a6aaca..085355e2acac 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1795,9 +1795,11 @@ I40E_CHECK_CMD_LENGTH(i40e_aqc_an_advt_reg);
/* Set Loopback mode (0x0618) */
struct i40e_aqc_set_lb_mode {
__le16 lb_mode;
-#define I40E_AQ_LB_PHY_LOCAL 0x01
-#define I40E_AQ_LB_PHY_REMOTE 0x02
-#define I40E_AQ_LB_MAC_LOCAL 0x04
+#define I40E_LEGACY_LOOPBACK_NVM_VER 0x6000
+#define I40E_AQ_LB_MAC_LOCAL 0x01
+#define I40E_AQ_LB_PHY_LOCAL 0x05
+#define I40E_AQ_LB_PHY_REMOTE 0x06
+#define I40E_AQ_LB_MAC_LOCAL_LEGACY 0x04
u8 reserved[14];
};
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 4f01e2a6b6bb..8f764ff5c990 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1830,6 +1830,32 @@ i40e_status i40e_aq_set_phy_int_mask(struct i40e_hw *hw,
return status;
}
+/**
+ * i40e_aq_set_mac_loopback
+ * @hw: pointer to the HW struct
+ * @ena_lpbk: Enable or Disable loopback
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Enable/disable loopback on a given port
+ */
+i40e_status i40e_aq_set_mac_loopback(struct i40e_hw *hw, bool ena_lpbk,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aqc_set_lb_mode *cmd =
+ (struct i40e_aqc_set_lb_mode *)&desc.params.raw;
+
+ i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_set_lb_modes);
+ if (ena_lpbk) {
+ if (hw->nvm.version <= I40E_LEGACY_LOOPBACK_NVM_VER)
+ cmd->lb_mode = cpu_to_le16(I40E_AQ_LB_MAC_LOCAL_LEGACY);
+ else
+ cmd->lb_mode = cpu_to_le16(I40E_AQ_LB_MAC_LOCAL);
+ }
+
+ return i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+}
+
/**
* i40e_aq_set_phy_debug
* @hw: pointer to the hw struct
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4880b740fa6e..298fdd19900c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -12920,6 +12920,29 @@ static void i40e_clear_rss_lut(struct i40e_vsi *vsi)
}
}
+/**
+ * i40e_set_loopback - turn on/off loopback mode on underlying PF
+ * @vsi: ptr to VSI
+ * @ena: flag to indicate the on/off setting
+ */
+static int i40e_set_loopback(struct i40e_vsi *vsi, bool ena)
+{
+ bool if_running = netif_running(vsi->netdev) &&
+ !test_and_set_bit(__I40E_VSI_DOWN, vsi->state);
+ int ret;
+
+ if (if_running)
+ i40e_down(vsi);
+
+ ret = i40e_aq_set_mac_loopback(&vsi->back->hw, ena, NULL);
+ if (ret)
+ netdev_err(vsi->netdev, "Failed to toggle loopback state\n");
+ if (if_running)
+ i40e_up(vsi);
+
+ return ret;
+}
+
/**
* i40e_set_features - set the netdev feature flags
* @netdev: ptr to the netdev being adjusted
@@ -12960,6 +12983,9 @@ static int i40e_set_features(struct net_device *netdev,
if (need_reset)
i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
+ if ((features ^ netdev->features) & NETIF_F_LOOPBACK)
+ return i40e_set_loopback(vsi, !!(features & NETIF_F_LOOPBACK));
+
return 0;
}
@@ -13722,7 +13748,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
hw_features |= NETIF_F_NTUPLE | NETIF_F_HW_TC;
- netdev->hw_features |= hw_features;
+ netdev->hw_features |= hw_features | NETIF_F_LOOPBACK;
netdev->features |= hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
netdev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index ebdcde6f1aeb..9a71121420c3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -105,6 +105,9 @@ enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details);
enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
bool atomic_reset);
+i40e_status i40e_aq_set_mac_loopback(struct i40e_hw *hw,
+ bool ena_lpbk,
+ struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_phy_int_mask(struct i40e_hw *hw, u16 mask,
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_clear_pxe_mode(struct i40e_hw *hw,
--
2.34.1
Powered by blists - more mailing lists