[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221206091428.28285-1-arun.ramadoss@microchip.com>
Date: Tue, 6 Dec 2022 14:44:15 +0530
From: Arun Ramadoss <arun.ramadoss@...rochip.com>
To: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: <woojung.huh@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
<andrew@...n.ch>, <vivien.didelot@...il.com>,
<f.fainelli@...il.com>, <olteanv@...il.com>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<linux@...linux.org.uk>, <Tristram.Ha@...rochip.com>,
<richardcochran@...il.com>, <ceggers@...i.de>
Subject: [Patch net-next v2 00/13] net: dsa: microchip: add PTP support for KSZ9563/KSZ8563 and LAN937x
KSZ9563/KSZ8563 and LAN937x switch are capable for supporting IEEE 1588 PTP
protocol. LAN937x has the same PTP register set similar to KSZ9563, hence the
implementation has been made common for the KSZ switches. KSZ9563 does not
support two step timestamping but LAN937x supports both. Tested the 1step &
2step p2p timestamping in LAN937x and p2p1step timestamping in KSZ9563.
This patch series is based on the Christian Eggers PTP support for KSZ9563.
Applied the Christian patch and updated as per the latest refactoring of KSZ
series code. The features added on top are PTP packet Interrupt
implementation based on nested handler, LAN937x two step timestamping and
programmable per_out pins.
Link: https://www.spinics.net/lists/netdev/msg705531.html
Patch v1 -> v2
- GPIO perout enable bit is different for LAN937x and KSZ9x. Added new patch
for configuring LAN937x programmable pins.
- PTP enabled in hardware based on both tx and rx timestamping of all the user
ports.
- Replaced setting of 802.1AS bit with P2P bit in PTP_MSG_CONF1 register.
RFC v2 -> Patch v1
- Changed the patch author based on past patch submission
- Changed the commit message prefix as net: dsa: microchip: ptp
Individual patch changes are listed in correspondig commits.
RFC v1 -> v2
- Added the p2p1step timestamping and conditional execution of 2 step for
LAN937x only.
- Added the periodic output support
Arun Ramadoss (5):
net: dsa: microchip: ptp: add 4 bytes in tail tag when ptp enabled
net: dsa: microchip: ptp: enable interrupt for timestamping
net: dsa: microchip: ptp: add support for perout programmable pins
net: dsa: microchip: ptp: lan937x: add 2 step timestamping
net: dsa: microchip: ptp: lan937x: Enable periodic output in LED pins
Christian Eggers (8):
net: dsa: microchip: ptp: add the posix clock support
net: dsa: microchip: ptp: Initial hardware time stamping support
net: dsa: microchip: ptp: manipulating absolute time using ptp hw
clock
net: ptp: add helper for one-step P2P clocks
net: dsa: microchip: ptp: add packet reception timestamping
net: dsa: microchip: ptp: add packet transmission timestamping
net: dsa: microchip: ptp: move pdelay_rsp correction field to tail tag
net: dsa: microchip: ptp: add periodic output signal
MAINTAINERS | 1 +
drivers/net/dsa/microchip/Kconfig | 11 +
drivers/net/dsa/microchip/Makefile | 5 +
drivers/net/dsa/microchip/ksz_common.c | 45 +-
drivers/net/dsa/microchip/ksz_common.h | 48 +
drivers/net/dsa/microchip/ksz_ptp.c | 1157 +++++++++++++++++++++++
drivers/net/dsa/microchip/ksz_ptp.h | 88 ++
drivers/net/dsa/microchip/ksz_ptp_reg.h | 142 +++
include/linux/dsa/ksz_common.h | 54 ++
include/linux/ptp_classify.h | 71 ++
net/dsa/tag_ksz.c | 271 +++++-
11 files changed, 1875 insertions(+), 18 deletions(-)
create mode 100644 drivers/net/dsa/microchip/ksz_ptp.c
create mode 100644 drivers/net/dsa/microchip/ksz_ptp.h
create mode 100644 drivers/net/dsa/microchip/ksz_ptp_reg.h
create mode 100644 include/linux/dsa/ksz_common.h
base-commit: c9f8d73645b6f76c8d14f49bc860f7143d001cb7
--
2.36.1
Powered by blists - more mailing lists