[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221213101723.348289-1-lizetao1@huawei.com>
Date: Tue, 13 Dec 2022 18:17:23 +0800
From: Li Zetao <lizetao1@...wei.com>
To: <f.fainelli@...il.com>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>
CC: <lizetao1@...wei.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH] r6040: Fix kmemleak in probe and remove
There is a memory leaks reported by kmemleak:
unreferenced object 0xffff888116111000 (size 2048):
comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s)
hex dump (first 32 bytes):
00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................
08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff827e20ee>] phy_device_create+0x4e/0x90
[<ffffffff827e6072>] get_phy_device+0xd2/0x220
[<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0
[<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0
[<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040]
...
The problem occurs in probe process as follows:
r6040_init_one:
mdiobus_register
mdiobus_scan <- alloc and register phy_device,
the reference count of phy_device is 3
r6040_mii_probe
phy_connect <- connect to the first phy_device,
so the reference count of the first
phy_device is 4, others are 3
register_netdev <- fault inject succeeded, goto error handling path
// error handling path
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
mdiobus_free(lp->mii_bus); <- the reference count of the first
phy_device is 1, it is not released
and other phy_devices are released
// similarly, the remove process also has the same problem
The root cause is traced to the phy_device is not disconnected when
removes one r6040 device in r6040_remove_one() or on error handling path
after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet
device is connected to the first PHY device of mii_bus, in order to
notify the connected driver when the link status changes, which is the
default behavior of the PHY infrastructure to handle everything.
Therefore the phy_device should be disconnected when removes one r6040
device or on error handling path.
Fix it by adding phy_disconnect() when removes one r6040 device or on
error handling path after r6040_mii probed successfully.
Fixes: 3831861b4ad8 ("r6040: implement phylib")
Signed-off-by: Li Zetao <lizetao1@...wei.com>
---
drivers/net/ethernet/rdc/r6040.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/rdc/r6040.c b/drivers/net/ethernet/rdc/r6040.c
index eecd52ed1ed2..95b682597da1 100644
--- a/drivers/net/ethernet/rdc/r6040.c
+++ b/drivers/net/ethernet/rdc/r6040.c
@@ -1159,10 +1159,12 @@ static int r6040_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Failed to register net device\n");
- goto err_out_mdio_unregister;
+ goto err_out_r6040_mii_remove;
}
return 0;
+err_out_r6040_mii_remove:
+ phy_disconnect(dev->phydev);
err_out_mdio_unregister:
mdiobus_unregister(lp->mii_bus);
err_out_mdio:
@@ -1186,6 +1188,7 @@ static void r6040_remove_one(struct pci_dev *pdev)
struct r6040_private *lp = netdev_priv(dev);
unregister_netdev(dev);
+ phy_disconnect(dev->phydev);
mdiobus_unregister(lp->mii_bus);
mdiobus_free(lp->mii_bus);
netif_napi_del(&lp->napi);
--
2.31.1
Powered by blists - more mailing lists