netdev - Re: [PATCH net v2] net: phy: mxl-gpy: fix delay time required by loopback disable function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <PH7PR19MB5613E43211EB8E566C1C1F40BDE89@PH7PR19MB5613.namprd19.prod.outlook.com>
Date:   Thu, 22 Dec 2022 05:23:12 +0000
From:   Liang Xu <lxu@...linear.com>
To:     "Russell King (Oracle)" <linux@...linux.org.uk>
CC:     "andrew@...n.ch" <andrew@...n.ch>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "kuba@...nel.org" <kuba@...nel.org>,
        Hauke Mehrtens <hmehrtens@...linear.com>,
        Thomas Mohren <tmohren@...linear.com>,
        "Ismail, Mohammad Athari" <mohammad.athari.ismail@...el.com>,
        "edumazet@...gle.com" <edumazet@...gle.com>,
        "pabeni@...hat.com" <pabeni@...hat.com>,
        Samuels Xu <samuelsdream@...mail.com>
Subject: Re: [PATCH net v2] net: phy: mxl-gpy: fix delay time required by
 loopback disable function



Thanks & Regards,
Xu Liang

> ________________________________________
> From: Russell King <linux@...linux.org.uk> on behalf of Russell King (Oracle) <linux@...linux.org.uk>
> Sent: Wednesday, December 21, 2022 8:21 PM
> To: Liang Xu
> Cc: andrew@...n.ch; hkallweit1@...il.com; netdev@...r.kernel.org; davem@...emloft.net; kuba@...nel.org; Hauke Mehrtens; Thomas Mohren; Ismail, Mohammad Athari; edumazet@...gle.com; pabeni@...hat.com
> Subject: Re: [PATCH net v2] net: phy: mxl-gpy: fix delay time required by loopback disable function
> 
> This email was sent from outside of MaxLinear.
> 
> Hi,
> 
> On Wed, Dec 21, 2022 at 05:43:58PM +0800, Xu Liang wrote:
> > GPY2xx devices need 3 seconds to fully switch out of loopback mode
> > before it can safely re-enter loopback mode.
> 
> Would it be better to record the time that loopback mode is exited,
> and then delay an attempt to re-enter loopback mode if it's less than
> three seconds since we exited?

Loopback is usually used in self-test or debugging.
So I just made a simple delay to avoid complexity of time recording.
Please let me know if you think it's worth to change, then I will update the patch.

> 
> Thanks.
> 
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/<https://www.armlinux.org.uk/developer/patches>
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
>