[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230111111718.40745-1-mengyuanlou@net-swift.com>
Date: Wed, 11 Jan 2023 19:17:18 +0800
From: Mengyuan Lou <mengyuanlou@...-swift.com>
To: netdev@...r.kernel.org
Cc: jiawenwu@...stnetic.com, Mengyuan Lou <mengyuanlou@...-swift.com>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next v8] net: ngbe: Add ngbe mdio bus driver.
Add mdio bus register for ngbe.
The internal phy and external phy need to be handled separately.
Add phy changed event detection.
Signed-off-by: Mengyuan Lou <mengyuanlou@...-swift.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
Change log:
v8:
Split C22 and C45 functions.
v7: address comments:
Andrew Lunn: https://lore.kernel.org/netdev/Y7roqgyjDN91hSIH@lunn.ch/
v6:
Remove structure ngbe_adapter and ngbe_hw, put all members to structure wx.
v5: address comments:
Andrew Lunn: https://lore.kernel.org/netdev/Y5RjwYgetMdzlQVZ@lunn.ch/
v4: address comments:
Jiri Pirko: https://lore.kernel.org/netdev/Y5L9m%2FMMOG6GTNrb@nanopsycho/
v3: address comments:
Jakub Kicinski: https://lore.kernel.org/netdev/20221208194215.55bc2ee1@kernel.org/
v2: address comments:
Andrew Lunn: https://lore.kernel.org/netdev/Y4p0dQWijzQMlBmW@lunn.ch/
drivers/net/ethernet/wangxun/Kconfig | 1 +
drivers/net/ethernet/wangxun/libwx/wx_type.h | 9 +
drivers/net/ethernet/wangxun/ngbe/Makefile | 2 +-
drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c | 39 ++-
drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h | 1 +
drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 37 ++-
drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c | 286 ++++++++++++++++++
drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h | 12 +
drivers/net/ethernet/wangxun/ngbe/ngbe_type.h | 24 ++
9 files changed, 397 insertions(+), 14 deletions(-)
create mode 100644 drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
create mode 100644 drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig
index 86310588c6c1..0922beac3ec0 100644
--- a/drivers/net/ethernet/wangxun/Kconfig
+++ b/drivers/net/ethernet/wangxun/Kconfig
@@ -25,6 +25,7 @@ config NGBE
tristate "Wangxun(R) GbE PCI Express adapters support"
depends on PCI
select LIBWX
+ select PHYLIB
help
This driver supports Wangxun(R) GbE PCI Express family of
adapters.
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index a52908d01c9c..165f61698177 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -133,11 +133,14 @@
/************************************* ETH MAC *****************************/
#define WX_MAC_TX_CFG 0x11000
#define WX_MAC_TX_CFG_TE BIT(0)
+#define WX_MAC_TX_CFG_SPEED_MASK GENMASK(30, 29)
+#define WX_MAC_TX_CFG_SPEED_1G (0x3 << 29)
#define WX_MAC_RX_CFG 0x11004
#define WX_MAC_RX_CFG_RE BIT(0)
#define WX_MAC_RX_CFG_JE BIT(8)
#define WX_MAC_PKT_FLT 0x11008
#define WX_MAC_PKT_FLT_PR BIT(0) /* promiscuous mode */
+#define WX_MAC_WDG_TIMEOUT 0x1100C
#define WX_MAC_RX_FLOW_CTRL 0x11090
#define WX_MAC_RX_FLOW_CTRL_RFE BIT(0) /* receive fc enable */
#define WX_MMC_CONTROL 0x11800
@@ -330,6 +333,12 @@ struct wx {
char eeprom_id[32];
enum wx_reset_type reset_type;
+ /* PHY stuff */
+ unsigned int link;
+ int speed;
+ int duplex;
+ struct phy_device *phydev;
+
bool wol_enabled;
bool ncsi_enabled;
bool gpio_ctrl;
diff --git a/drivers/net/ethernet/wangxun/ngbe/Makefile b/drivers/net/ethernet/wangxun/ngbe/Makefile
index 391c2cbc1bb4..50fdca87d2a5 100644
--- a/drivers/net/ethernet/wangxun/ngbe/Makefile
+++ b/drivers/net/ethernet/wangxun/ngbe/Makefile
@@ -6,4 +6,4 @@
obj-$(CONFIG_NGBE) += ngbe.o
-ngbe-objs := ngbe_main.o ngbe_hw.o
+ngbe-objs := ngbe_main.o ngbe_hw.o ngbe_mdio.o
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
index 588de24b5e18..b9534d608d35 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.c
@@ -39,16 +39,24 @@ int ngbe_eeprom_chksum_hostif(struct wx *wx)
static int ngbe_reset_misc(struct wx *wx)
{
wx_reset_misc(wx);
- if (wx->mac_type == em_mac_type_rgmii)
- wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
if (wx->gpio_ctrl) {
/* gpio0 is used to power on/off control*/
wr32(wx, NGBE_GPIO_DDR, 0x1);
- wr32(wx, NGBE_GPIO_DR, NGBE_GPIO_DR_0);
+ ngbe_sfp_modules_txrx_powerctl(wx, false);
}
return 0;
}
+void ngbe_sfp_modules_txrx_powerctl(struct wx *wx, bool swi)
+{
+ if (swi)
+ /* gpio0 is used to power on control*/
+ wr32(wx, NGBE_GPIO_DR, 0);
+ else
+ /* gpio0 is used to power off control*/
+ wr32(wx, NGBE_GPIO_DR, NGBE_GPIO_DR_0);
+}
+
/**
* ngbe_reset_hw - Perform hardware reset
* @wx: pointer to hardware structure
@@ -59,15 +67,26 @@ static int ngbe_reset_misc(struct wx *wx)
**/
int ngbe_reset_hw(struct wx *wx)
{
- int status = 0;
- u32 reset = 0;
+ u32 val = 0;
+ int ret = 0;
/* Call wx stop to disable tx/rx and clear interrupts */
- status = wx_stop_adapter(wx);
- if (status != 0)
- return status;
- reset = WX_MIS_RST_LAN_RST(wx->bus.func);
- wr32(wx, WX_MIS_RST, reset | rd32(wx, WX_MIS_RST));
+ ret = wx_stop_adapter(wx);
+ if (ret != 0)
+ return ret;
+
+ if (wx->mac_type != em_mac_type_mdi) {
+ val = WX_MIS_RST_LAN_RST(wx->bus.func);
+ wr32(wx, WX_MIS_RST, val | rd32(wx, WX_MIS_RST));
+
+ ret = read_poll_timeout(rd32, val,
+ !(val & (BIT(9) << wx->bus.func)), 1000,
+ 100000, false, wx, 0x10028);
+ if (ret) {
+ wx_err(wx, "Lan reset exceed s maximum times.\n");
+ return ret;
+ }
+ }
ngbe_reset_misc(wx);
/* Store the permanent mac address */
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h
index 8d14d51c0a90..a4693e006816 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_hw.h
@@ -8,5 +8,6 @@
#define _NGBE_HW_H_
int ngbe_eeprom_chksum_hostif(struct wx *wx);
+void ngbe_sfp_modules_txrx_powerctl(struct wx *wx, bool swi);
int ngbe_reset_hw(struct wx *wx);
#endif /* _NGBE_HW_H_ */
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
index f66513ddf6d9..ed52f80b5475 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
@@ -9,10 +9,12 @@
#include <linux/aer.h>
#include <linux/etherdevice.h>
#include <net/ip.h>
+#include <linux/phy.h>
#include "../libwx/wx_type.h"
#include "../libwx/wx_hw.h"
#include "ngbe_type.h"
+#include "ngbe_mdio.h"
#include "ngbe_hw.h"
char ngbe_driver_name[] = "ngbe";
@@ -146,11 +148,29 @@ static int ngbe_sw_init(struct wx *wx)
return 0;
}
+static void ngbe_disable_device(struct wx *wx)
+{
+ struct net_device *netdev = wx->netdev;
+
+ /* disable receives */
+ wx_disable_rx(wx);
+ netif_tx_disable(netdev);
+ if (wx->gpio_ctrl)
+ ngbe_sfp_modules_txrx_powerctl(wx, false);
+}
+
static void ngbe_down(struct wx *wx)
{
- netif_carrier_off(wx->netdev);
- netif_tx_disable(wx->netdev);
-};
+ phy_stop(wx->phydev);
+ ngbe_disable_device(wx);
+}
+
+static void ngbe_up(struct wx *wx)
+{
+ if (wx->gpio_ctrl)
+ ngbe_sfp_modules_txrx_powerctl(wx, true);
+ phy_start(wx->phydev);
+}
/**
* ngbe_open - Called when a network interface is made active
@@ -164,8 +184,13 @@ static void ngbe_down(struct wx *wx)
static int ngbe_open(struct net_device *netdev)
{
struct wx *wx = netdev_priv(netdev);
+ int err;
wx_control_hw(wx, true);
+ err = ngbe_phy_connect(wx);
+ if (err)
+ return err;
+ ngbe_up(wx);
return 0;
}
@@ -186,6 +211,7 @@ static int ngbe_close(struct net_device *netdev)
struct wx *wx = netdev_priv(netdev);
ngbe_down(wx);
+ phy_disconnect(wx->phydev);
wx_control_hw(wx, false);
return 0;
@@ -385,6 +411,11 @@ static int ngbe_probe(struct pci_dev *pdev,
eth_hw_addr_set(netdev, wx->mac.perm_addr);
wx_mac_set_default_filter(wx, wx->mac.perm_addr);
+ /* phy Interface Configuration */
+ err = ngbe_mdio_init(wx);
+ if (err)
+ goto err_free_mac_table;
+
err = register_netdev(netdev);
if (err)
goto err_register;
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
new file mode 100644
index 000000000000..ba33a57b42c2
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */
+
+#include <linux/ethtool.h>
+#include <linux/iopoll.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+
+#include "../libwx/wx_type.h"
+#include "../libwx/wx_hw.h"
+#include "ngbe_type.h"
+#include "ngbe_mdio.h"
+
+static int ngbe_phy_read_reg_internal(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ struct wx *wx = bus->priv;
+
+ if (phy_addr != 0)
+ return 0xffff;
+ return (u16)rd32(wx, NGBE_PHY_CONFIG(regnum));
+}
+
+static int ngbe_phy_write_reg_internal(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+ struct wx *wx = bus->priv;
+
+ if (phy_addr == 0)
+ wr32(wx, NGBE_PHY_CONFIG(regnum), value);
+ return 0;
+}
+
+static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ u32 command, val, device_type = 0;
+ struct wx *wx = bus->priv;
+ int ret;
+
+ wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(regnum) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(device_type);
+ wr32(wx, NGBE_MSCA, command);
+ command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wx, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wx, NGBE_MSCC);
+ if (ret) {
+ wx_err(wx, "Mdio read c22 command did not complete.\n");
+ return ret;
+ }
+
+ return (u16)rd32(wx, NGBE_MSCC);
+}
+
+static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
+{
+ u32 command, val, device_type = 0;
+ struct wx *wx = bus->priv;
+ int ret;
+
+ wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(regnum) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(device_type);
+ wr32(wx, NGBE_MSCA, command);
+ command = value |
+ NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wx, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wx, NGBE_MSCC);
+ if (ret)
+ wx_err(wx, "Mdio write c22 command did not complete.\n");
+
+ return ret;
+}
+
+static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum)
+{
+ struct wx *wx = bus->priv;
+ u32 val, command;
+ int ret;
+
+ wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(mdiobus_c45_regad(regnum)) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(devnum);
+ wr32(wx, NGBE_MSCA, command);
+ command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wx, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wx, NGBE_MSCC);
+ if (ret) {
+ wx_err(wx, "Mdio read c45 command did not complete.\n");
+ return ret;
+ }
+
+ return (u16)rd32(wx, NGBE_MSCC);
+}
+
+static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
+ int devnum, int regnum, u16 value)
+{
+ struct wx *wx = bus->priv;
+ int ret, command;
+ u16 val;
+
+ wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
+ /* setup and write the address cycle command */
+ command = NGBE_MSCA_RA(mdiobus_c45_regad(regnum)) |
+ NGBE_MSCA_PA(phy_addr) |
+ NGBE_MSCA_DA(devnum);
+ wr32(wx, NGBE_MSCA, command);
+ command = value |
+ NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
+ NGBE_MSCC_BUSY |
+ NGBE_MDIO_CLK(6);
+ wr32(wx, NGBE_MSCC, command);
+
+ /* wait to complete */
+ ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
+ 100000, false, wx, NGBE_MSCC);
+ if (ret)
+ wx_err(wx, "Mdio write c45 command did not complete.\n");
+
+ return ret;
+}
+
+static int ngbe_phy_read_reg_c22(struct mii_bus *bus, int phy_addr, int regnum)
+{
+ struct wx *wx = bus->priv;
+ u16 phy_data;
+
+ if (wx->mac_type == em_mac_type_mdi)
+ phy_data = ngbe_phy_read_reg_internal(bus, phy_addr, regnum);
+ else
+ phy_data = ngbe_phy_read_reg_mdi_c22(bus, phy_addr, regnum);
+
+ return phy_data;
+}
+
+static int ngbe_phy_write_reg_c22(struct mii_bus *bus, int phy_addr,
+ int regnum, u16 value)
+{
+ struct wx *wx = bus->priv;
+ int ret;
+
+ if (wx->mac_type == em_mac_type_mdi)
+ ret = ngbe_phy_write_reg_internal(bus, phy_addr, regnum, value);
+ else
+ ret = ngbe_phy_write_reg_mdi_c22(bus, phy_addr, regnum, value);
+
+ return ret;
+}
+
+static void ngbe_handle_link_change(struct net_device *dev)
+{
+ struct wx *wx = netdev_priv(dev);
+ struct phy_device *phydev;
+ u32 lan_speed, reg;
+
+ phydev = wx->phydev;
+ if (!(wx->link != phydev->link ||
+ wx->speed != phydev->speed ||
+ wx->duplex != phydev->duplex))
+ return;
+
+ wx->link = phydev->link;
+ wx->speed = phydev->speed;
+ wx->duplex = phydev->duplex;
+ switch (phydev->speed) {
+ case SPEED_10:
+ lan_speed = 0;
+ break;
+ case SPEED_100:
+ lan_speed = 1;
+ break;
+ case SPEED_1000:
+ default:
+ lan_speed = 2;
+ break;
+ }
+ wr32m(wx, NGBE_CFG_LAN_SPEED, 0x3, lan_speed);
+
+ if (phydev->link) {
+ reg = rd32(wx, WX_MAC_TX_CFG);
+ reg &= ~WX_MAC_TX_CFG_SPEED_MASK;
+ reg |= WX_MAC_TX_CFG_SPEED_1G | WX_MAC_TX_CFG_TE;
+ wr32(wx, WX_MAC_TX_CFG, reg);
+ /* Re configure MAC RX */
+ reg = rd32(wx, WX_MAC_RX_CFG);
+ wr32(wx, WX_MAC_RX_CFG, reg);
+ wr32(wx, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
+ reg = rd32(wx, WX_MAC_WDG_TIMEOUT);
+ wr32(wx, WX_MAC_WDG_TIMEOUT, reg);
+ }
+ phy_print_status(phydev);
+}
+
+int ngbe_phy_connect(struct wx *wx)
+{
+ int ret;
+
+ ret = phy_connect_direct(wx->netdev,
+ wx->phydev,
+ ngbe_handle_link_change,
+ PHY_INTERFACE_MODE_RGMII_ID);
+ if (ret) {
+ wx_err(wx, "PHY connect failed.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ngbe_phy_fixup(struct wx *wx)
+{
+ struct phy_device *phydev = wx->phydev;
+ struct ethtool_eee eee;
+
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+ phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+ if (wx->mac_type != em_mac_type_mdi)
+ return;
+ /* disable EEE, internal phy does not support eee */
+ memset(&eee, 0, sizeof(eee));
+ phy_ethtool_set_eee(phydev, &eee);
+}
+
+int ngbe_mdio_init(struct wx *wx)
+{
+ struct pci_dev *pdev = wx->pdev;
+ struct mii_bus *mii_bus;
+ int ret;
+
+ mii_bus = devm_mdiobus_alloc(&pdev->dev);
+ if (!mii_bus)
+ return -ENOMEM;
+
+ mii_bus->name = "ngbe_mii_bus";
+ mii_bus->read = ngbe_phy_read_reg_c22;
+ mii_bus->write = ngbe_phy_write_reg_c22;
+ mii_bus->phy_mask = GENMASK(31, 4);
+ mii_bus->parent = &pdev->dev;
+ mii_bus->priv = wx;
+
+ if (wx->mac_type == em_mac_type_rgmii) {
+ mii_bus->read_c45 = ngbe_phy_read_reg_mdi_c45;
+ mii_bus->write_c45 = ngbe_phy_write_reg_mdi_c45;
+ }
+
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "ngbe-%x",
+ (pdev->bus->number << 8) | pdev->devfn);
+ ret = devm_mdiobus_register(&pdev->dev, mii_bus);
+ if (ret)
+ return ret;
+
+ wx->phydev = phy_find_first(mii_bus);
+ if (!wx->phydev)
+ return -ENODEV;
+
+ phy_attached_info(wx->phydev);
+ ngbe_phy_fixup(wx);
+
+ wx->link = 0;
+ wx->speed = 0;
+ wx->duplex = 0;
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
new file mode 100644
index 000000000000..0a6400dd89c4
--- /dev/null
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * WangXun Gigabit PCI Express Linux driver
+ * Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd.
+ */
+
+#ifndef _NGBE_MDIO_H_
+#define _NGBE_MDIO_H_
+
+int ngbe_phy_connect(struct wx *wx);
+int ngbe_mdio_init(struct wx *wx);
+#endif /* _NGBE_MDIO_H_ */
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index 369d181930bc..612b9da2db8f 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -60,6 +60,26 @@
#define NGBE_EEPROM_VERSION_L 0x1D
#define NGBE_EEPROM_VERSION_H 0x1E
+/* mdio access */
+#define NGBE_MSCA 0x11200
+#define NGBE_MSCA_RA(v) ((0xFFFF & (v)))
+#define NGBE_MSCA_PA(v) ((0x1F & (v)) << 16)
+#define NGBE_MSCA_DA(v) ((0x1F & (v)) << 21)
+#define NGBE_MSCC 0x11204
+#define NGBE_MSCC_DATA(v) ((0xFFFF & (v)))
+#define NGBE_MSCC_CMD(v) ((0x3 & (v)) << 16)
+
+enum NGBE_MSCA_CMD_value {
+ NGBE_MSCA_CMD_RSV = 0,
+ NGBE_MSCA_CMD_WRITE,
+ NGBE_MSCA_CMD_POST_READ,
+ NGBE_MSCA_CMD_READ,
+};
+
+#define NGBE_MSCC_SADDR BIT(18)
+#define NGBE_MSCC_BUSY BIT(22)
+#define NGBE_MDIO_CLK(v) ((0x7 & (v)) << 19)
+
/* Media-dependent registers. */
#define NGBE_MDIO_CLAUSE_SELECT 0x11220
@@ -72,6 +92,10 @@
#define NGBE_GPIO_DDR_0 BIT(0) /* SDP0 IO direction */
#define NGBE_GPIO_DDR_1 BIT(1) /* SDP1 IO direction */
+#define NGBE_PHY_CONFIG(reg_offset) (0x14000 + ((reg_offset) * 4))
+#define NGBE_CFG_LAN_SPEED 0x14440
+#define NGBE_CFG_PORT_ST 0x14404
+
/* Wake up registers */
#define NGBE_PSR_WKUP_CTL 0x15B80
/* Wake Up Filter Control Bit */
--
2.39.0
Powered by blists - more mailing lists