Message-ID: <Y8/NrXosvah67bUg@unreal>
Date:   Tue, 24 Jan 2023 14:23:09 +0200
From:   Leon Romanovsky <leon@...nel.org>
To:     Jakub Sitnicki <jakub@...udflare.com>
Cc:     netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Kuniyuki Iwashima <kuniyu@...zon.com>,
        Neal Cardwell <ncardwell@...gle.com>, selinux@...r.kernel.org,
        Paul Moore <paul@...l-moore.com>,
        Stephen Smalley <stephen.smalley.work@...il.com>,
        Eric Paris <eparis@...isplace.org>, kernel-team@...udflare.com,
        Marek Majkowski <marek@...udflare.com>
Subject: Re: [PATCH net-next v5 1/2] inet: Add IP_LOCAL_PORT_RANGE socket
 option

On Tue, Jan 24, 2023 at 11:05:26AM +0100, Jakub Sitnicki wrote:
> Users who want to share a single public IP address for outgoing connections
> between several hosts traditionally reach for SNAT. However, SNAT requires
> state keeping on the node(s) performing the NAT.
> 
> A stateless alternative exists, where a single IP address used for egress
> can be shared between several hosts by partitioning the available ephemeral
> port range. In such a setup:
> 
> 1. Each host gets assigned a disjoint range of ephemeral ports.
> 2. Applications open connections from the host-assigned port range.
> 3. Return traffic gets routed to the host based on both, the destination IP
>    and the destination port.
> 
> An application which wants to open an outgoing connection (connect) from a
> given port range today can choose between two solutions:
> 
> 1. Manually pick the source port by bind()'ing to it before connect()'ing
>    the socket.
> 
>    This approach has a couple of downsides:
> 
>    a) Search for a free port has to be implemented in the user-space. If
>       the chosen 4-tuple happens to be busy, the application needs to retry
>       from a different local port number.
> 
>       Detecting if 4-tuple is busy can be either easy (TCP) or hard
>       (UDP). In TCP case, the application simply has to check if connect()
>       returned an error (EADDRNOTAVAIL). That is assuming that the local
>       port sharing was enabled (REUSEADDR) by all the sockets.
> 
>         # Assume desired local port range is 60_000-60_511
>         s = socket(AF_INET, SOCK_STREAM)
>         s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
>         s.bind(("192.0.2.1", 60_000))
>         s.connect(("1.1.1.1", 53))
>         # Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy
>         # Application must retry with another local port
> 
>       In case of UDP, the network stack allows binding more than one socket
>       to the same 4-tuple, when local port sharing is enabled
>       (REUSEADDR). Hence detecting the conflict is much harder and involves
>       querying sock_diag and toggling the REUSEADDR flag [1].
> 
>    b) For TCP, bind()-ing to a port within the ephemeral port range means
>       that no connecting sockets, that is those which leave it to the
>       network stack to find a free local port at connect() time, can use
>       the this port.
> 
>       IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port
>       will be skipped during the free port search at connect() time.
> 
> 2. Isolate the app in a dedicated netns and use the use the per-netns
>    ip_local_port_range sysctl to adjust the ephemeral port range bounds.
> 
>    The per-netns setting affects all sockets, so this approach can be used
>    only if:
> 
>    - there is just one egress IP address, or
>    - the desired egress port range is the same for all egress IP addresses
>      used by the application.
> 
>    For TCP, this approach avoids the downsides of (1). Free port search and
>    4-tuple conflict detection is done by the network stack:
> 
>      system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'")
> 
>      s = socket(AF_INET, SOCK_STREAM)
>      s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1)
>      s.bind(("192.0.2.1", 0))
>      s.connect(("1.1.1.1", 53))
>      # Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy
> 
>   For UDP this approach has limited applicability. Setting the
>   IP_BIND_ADDRESS_NO_PORT socket option does not result in local source
>   port being shared with other connected UDP sockets.
> 
>   Hence relying on the network stack to find a free source port, limits the
>   number of outgoing UDP flows from a single IP address down to the number
>   of available ephemeral ports.
> 
> To put it another way, partitioning the ephemeral port range between hosts
> using the existing Linux networking API is cumbersome.
> 
> To address this use case, add a new socket option at the SOL_IP level,
> named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the
> ephemeral port range for each socket individually.
> 
> The option can be used only to narrow down the per-netns local port
> range. If the per-socket range lies outside of the per-netns range, the
> latter takes precedence.
> 
> UAPI-wise, the low and high range bounds are passed to the kernel as a pair
> of u16 values in host byte order packed into a u32. This avoids pointer
> passing.
> 
>   PORT_LO = 40_000
>   PORT_HI = 40_511
> 
>   s = socket(AF_INET, SOCK_STREAM)
>   v = struct.pack("I", PORT_HI << 16 | PORT_LO)
>   s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v)
>   s.bind(("127.0.0.1", 0))
>   s.getsockname()
>   # Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511),
>   # if there is a free port. EADDRINUSE otherwise.
> 
> [1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116
> 
> v4 -> v5:
>  * Use the fact that netns port range starts at 1 when clamping. (Kuniyuki)
> 
> v3 -> v4:
>  * Clarify that u16 values are in host byte order (Neal)
> 
> v2 -> v3:
>  * Make SCTP bind()/bind_add() respect IP_LOCAL_PORT_RANGE option (Eric)
> 
> v1 -> v2:
>  * Fix the corner case when the per-socket range doesn't overlap with the
>    per-netns range. Fallback correctly to the per-netns range. (Kuniyuki)

You silently ignored my review comment.
Let's repeat it again. Please put changelog after --- marker. Changelog
doesn't belong to commit message.

Thanks

> 
> Reviewed-by: Marek Majkowski <marek@...udflare.com>
> Reviewed-by: Kuniyuki Iwashima <kuniyu@...zon.com>
> Signed-off-by: Jakub Sitnicki <jakub@...udflare.com>
> ---
>  include/net/inet_sock.h         |  4 ++++
>  include/net/ip.h                |  3 ++-
>  include/uapi/linux/in.h         |  1 +
>  net/ipv4/inet_connection_sock.c | 25 +++++++++++++++++++++++--
>  net/ipv4/inet_hashtables.c      |  2 +-
>  net/ipv4/ip_sockglue.c          | 18 ++++++++++++++++++
>  net/ipv4/udp.c                  |  2 +-
>  net/sctp/socket.c               |  2 +-
>  8 files changed, 51 insertions(+), 6 deletions(-)

Powered by blists - more mailing lists