netdev - [PATCH net-next v4 1/4] net: phylink: Set host

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230127142621.1761278-2-yoshihiro.shimoda.uh@renesas.com>
Date:   Fri, 27 Jan 2023 23:26:18 +0900
From:   Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To:     linux@...linux.org.uk, andrew@...n.ch, hkallweit1@...il.com,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com
Cc:     netdev@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
Subject: [PATCH net-next v4 1/4] net: phylink: Set host_interfaces for a non-sfp PHY

If a new flag (ovr_host_interfaces) in the phylink_config is set,
overwrite the host_interfaces in the phy_device by link_interface.

Note that an ethernet PHY driver like marvell10g will check
PHY_INTERFACE_MODE_SGMII in the host_interfaces whther the host
controller supports a rate matching interface mode or not. So, set
PHY_INTERFACE_MODE_SGMII to the host_interfaces if it is set in
the supported_interfaces.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
---
 drivers/net/phy/phylink.c | 11 +++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 319790221d7f..dee64b4a1175 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1814,6 +1814,17 @@ int phylink_fwnode_phy_connect(struct phylink *pl,
 		pl->link_config.interface = pl->link_interface;
 	}
 
+	if (pl->config->ovr_host_interfaces) {
+		__set_bit(pl->link_interface, phy_dev->host_interfaces);
+
+		/* An ethernet PHY driver will check PHY_INTERFACE_MODE_SGMII
+		 * in the host_interfaces whether the host controller supports
+		 * a rate matching interface mode or not.
+		 */
+		if (test_bit(PHY_INTERFACE_MODE_SGMII, pl->config->supported_interfaces))
+			__set_bit(PHY_INTERFACE_MODE_SGMII, phy_dev->host_interfaces);
+	}
+
 	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
 				pl->link_interface);
 	if (ret) {
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index c492c26202b5..c8dd53b1e857 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -124,6 +124,8 @@ enum phylink_op_type {
  *		      if MAC link is at %MLO_AN_FIXED mode.
  * @mac_managed_pm: if true, indicate the MAC driver is responsible for PHY PM.
  * @ovr_an_inband: if true, override PCS to MLO_AN_INBAND
+ * @ovr_host_interfaces: if true, override host_interfaces of phy_device from
+ *			 link_interface.
  * @get_fixed_state: callback to execute to determine the fixed link state,
  *		     if MAC link is at %MLO_AN_FIXED mode.
  * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx
@@ -137,6 +139,7 @@ struct phylink_config {
 	bool poll_fixed_state;
 	bool mac_managed_pm;
 	bool ovr_an_inband;
+	bool ovr_host_interfaces;
 	void (*get_fixed_state)(struct phylink_config *config,
 				struct phylink_link_state *state);
 	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
-- 
2.25.1