[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y+e1IfWcmHJjJlgp@lunn.ch>
Date: Sat, 11 Feb 2023 16:32:49 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
davem@...emloft.net, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Ioana Ciornei <ioana.ciornei@....com>
Subject: Re: [PATCH net-next] net: pcs: tse: port to pcs-lynx
On Fri, Feb 10, 2023 at 09:31:59PM +0200, Vladimir Oltean wrote:
> On Fri, Feb 10, 2023 at 08:09:49PM +0100, Maxime Chevallier wrote:
> > When submitting the initial driver for the Altera TSE PCS, Russell King
> > noted that the register layout for the TSE PCS is very similar to the
> > Lynx PCS. The main difference being that TSE PCS's register space is
> > memory-mapped, whereas Lynx's is exposed over MDIO.
> >
> > Convert the TSE PCS to reuse the whole logic from Lynx, by allowing
> > the creation of a dummy MDIO bus, and a dummy MDIO device located at
> > address 0 on that bus. The MAC driver that uses this PCS must provide
> > callbacks to read/write the MMIO.
> >
> > Also convert the Altera TSE MAC driver to this new way of using the TSE
> > PCS.
> >
> > Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
> > ---
> > drivers/net/ethernet/altera/altera_tse.h | 2 +-
> > drivers/net/ethernet/altera/altera_tse_main.c | 50 ++++-
> > drivers/net/pcs/Kconfig | 4 +
> > drivers/net/pcs/pcs-altera-tse.c | 194 +++++++-----------
> > include/linux/pcs-altera-tse.h | 22 +-
> > 5 files changed, 142 insertions(+), 130 deletions(-)
>
> The glue layer is larger than the duplicated PCS code? :(
Another option might be regmap. There are both regmap-mdio.c and
regmap-mmio.c.
Andrew
Powered by blists - more mailing lists