[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230331092347.268996-1-vinschen@redhat.com>
Date: Fri, 31 Mar 2023 11:23:47 +0200
From: Corinna Vinschen <vinschen@...hat.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>, netdev@...r.kernel.org
Subject: [PATCH net] net: stmmac: fix up RX flow hash indirection table when setting channels
stmmac_reinit_queues() fails to fix up the RX hash. Even if the number
of channels gets restricted, the output of `ethtool -x' indicates that
all RX queues are used:
$ ethtool -l enp0s29f2
Channel parameters for enp0s29f2:
Pre-set maximums:
RX: 8
TX: 8
Other: n/a
Combined: n/a
Current hardware settings:
RX: 8
TX: 8
Other: n/a
Combined: n/a
$ ethtool -x enp0s29f2
RX flow hash indirection table for enp0s29f2 with 8 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 0 1 2 3 4 5 6 7
[...]
$ ethtool -L enp0s29f2 rx 3
$ ethtool -x enp0s29f2
RX flow hash indirection table for enp0s29f2 with 3 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 0 1 2 3 4 5 6 7
[...]
Fix this by setting the indirection table according to the number
of specified queues. The result is now as expected:
$ ethtool -L enp0s29f2 rx 3
$ ethtool -x enp0s29f2
RX flow hash indirection table for enp0s29f2 with 3 RX ring(s):
0: 0 1 2 0 1 2 0 1
8: 2 0 1 2 0 1 2 0
[...]
Tested on Intel Elkhart Lake.
Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels")
Signed-off-by: Corinna Vinschen <vinschen@...hat.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c5e74097d9ab..2218b1882f39 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6948,7 +6948,7 @@ static void stmmac_napi_del(struct net_device *dev)
int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
{
struct stmmac_priv *priv = netdev_priv(dev);
- int ret = 0;
+ int ret = 0, i;
if (netif_running(dev))
stmmac_release(dev);
@@ -6957,6 +6957,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
priv->plat->rx_queues_to_use = rx_cnt;
priv->plat->tx_queues_to_use = tx_cnt;
+ for (i = 0; i < ARRAY_SIZE(priv->rss.table); i++)
+ priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt);
stmmac_napi_add(dev);
--
2.39.2
Powered by blists - more mailing lists