| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230405-ksz884x-unused-code-v1-3-a3349811d5ef@kernel.org>
Date: Wed, 05 Apr 2023 10:39:18 +0200
From: Simon Horman <horms@...nel.org>
To: Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>
Cc: Nathan Chancellor <nathan@...nel.org>,
Nick Desaulniers <ndesaulniers@...gle.com>,
Tom Rix <trix@...hat.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, llvm@...ts.linux.dev
Subject: [PATCH net-next 3/3] ksz884x: remove unused functions
Remove unused functions and now unused #defines from ksz884x driver.
These functions and #defines may have some value in documenting the
hardware. But that information may be accessed via scm history.
Flagged by clang-16 with W=1.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@...nel.org>
---
drivers/net/ethernet/micrel/ksz884x.c | 308 ----------------------------------
1 file changed, 308 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 7a6f71ec8355..48d9cb8c6773 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -153,16 +153,10 @@
#define KS884X_PHY_CTRL_OFFSET 0x00
-#define KS884X_PHY_STATUS_OFFSET 0x02
-
#define KS884X_PHY_AUTO_NEG_OFFSET 0x08
#define KS884X_PHY_REMOTE_CAP_OFFSET 0x0A
-#define KS884X_PHY_LINK_MD_OFFSET 0x00
-
-#define KS884X_PHY_PHY_CTRL_OFFSET 0x02
-
/* SIDER */
#define KS884X_SIDER_P 0x0400
#define KS884X_CHIP_ID_OFFSET KS884X_SIDER_P
@@ -210,9 +204,6 @@
/* SGCR7 */
#define KS8842_SGCR7_P 0x0412
-#define KS8842_SWITCH_CTRL_7_OFFSET KS8842_SGCR7_P
-
-#define SWITCH_UNK_DEF_PORT_ENABLE 0x0008
/* MACAR1 */
#define KS8842_MACAR1_P 0x0470
@@ -246,15 +237,10 @@
#define PORT_BASED_PRIORITY_MASK 0x0018
#define PORT_BASED_PRIORITY_BASE 0x0003
#define PORT_BASED_PRIORITY_SHIFT 3
-#define PORT_INSERT_TAG 0x0004
-#define PORT_REMOVE_TAG 0x0002
#define PORT_PRIO_QUEUE_ENABLE 0x0001
#define KS8842_PORT_CTRL_2_OFFSET 0x02
-#define PORT_INGRESS_VLAN_FILTER 0x4000
-#define PORT_DISCARD_NON_VID 0x2000
-#define PORT_FORCE_FLOW_CTRL 0x1000
#define PORT_BACK_PRESSURE 0x0800
#define PORT_TX_ENABLE 0x0400
#define PORT_RX_ENABLE 0x0200
@@ -1081,15 +1067,6 @@ static void hw_turn_on_intr(struct ksz_hw *hw, u32 bit)
hw_set_intr(hw, hw->intr_mask);
}
-static inline void hw_ena_intr_bit(struct ksz_hw *hw, uint interrupt)
-{
- u32 read_intr;
-
- read_intr = readl(hw->io + KS884X_INTERRUPTS_ENABLE);
- hw->intr_set = read_intr | interrupt;
- writel(hw->intr_set, hw->io + KS884X_INTERRUPTS_ENABLE);
-}
-
static inline void hw_read_intr(struct ksz_hw *hw, uint *status)
{
*status = readl(hw->io + KS884X_INTERRUPTS_STATUS);
@@ -1458,29 +1435,6 @@ static void port_init_cnt(struct ksz_hw *hw, int port)
* Port functions
*/
-/**
- * port_chk - check port register bits
- * @hw: The hardware instance.
- * @port: The port index.
- * @offset: The offset of the port register.
- * @bits: The data bits to check.
- *
- * This function checks whether the specified bits of the port register are set
- * or not.
- *
- * Return 0 if the bits are not set.
- */
-static int port_chk(struct ksz_hw *hw, int port, int offset, u16 bits)
-{
- u32 addr;
- u16 data;
-
- PORT_CTRL_ADDR(port, addr);
- addr += offset;
- data = readw(hw->io + addr);
- return (data & bits) == bits;
-}
-
/**
* port_cfg - set port register bits
* @hw: The hardware instance.
@@ -1507,53 +1461,6 @@ static void port_cfg(struct ksz_hw *hw, int port, int offset, u16 bits,
writew(data, hw->io + addr);
}
-/**
- * port_chk_shift - check port bit
- * @hw: The hardware instance.
- * @port: The port index.
- * @addr: The offset of the register.
- * @shift: Number of bits to shift.
- *
- * This function checks whether the specified port is set in the register or
- * not.
- *
- * Return 0 if the port is not set.
- */
-static int port_chk_shift(struct ksz_hw *hw, int port, u32 addr, int shift)
-{
- u16 data;
- u16 bit = 1 << port;
-
- data = readw(hw->io + addr);
- data >>= shift;
- return (data & bit) == bit;
-}
-
-/**
- * port_cfg_shift - set port bit
- * @hw: The hardware instance.
- * @port: The port index.
- * @addr: The offset of the register.
- * @shift: Number of bits to shift.
- * @set: The flag indicating whether the port is to be set or not.
- *
- * This routine sets or resets the specified port in the register.
- */
-static void port_cfg_shift(struct ksz_hw *hw, int port, u32 addr, int shift,
- int set)
-{
- u16 data;
- u16 bits = 1 << port;
-
- data = readw(hw->io + addr);
- bits <<= shift;
- if (set)
- data |= bits;
- else
- data &= ~bits;
- writew(data, hw->io + addr);
-}
-
/**
* port_r8 - read byte from port register
* @hw: The hardware instance.
@@ -1656,12 +1563,6 @@ static inline void port_cfg_broad_storm(struct ksz_hw *hw, int p, int set)
KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM, set);
}
-static inline int port_chk_broad_storm(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_BROADCAST_STORM);
-}
-
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROTECTION_RATE 10
@@ -1814,102 +1715,6 @@ static inline void port_cfg_back_pressure(struct ksz_hw *hw, int p, int set)
KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE, set);
}
-static inline void port_cfg_force_flow_ctrl(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL, set);
-}
-
-static inline int port_chk_back_pressure(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_BACK_PRESSURE);
-}
-
-static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_FORCE_FLOW_CTRL);
-}
-
-/* Spanning Tree */
-
-static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_RX_ENABLE, set);
-}
-
-static inline void port_cfg_tx(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_TX_ENABLE, set);
-}
-
-static inline void sw_cfg_fast_aging(struct ksz_hw *hw, int set)
-{
- sw_cfg(hw, KS8842_SWITCH_CTRL_1_OFFSET, SWITCH_FAST_AGING, set);
-}
-
-static inline void sw_flush_dyn_mac_table(struct ksz_hw *hw)
-{
- if (!(hw->overrides & FAST_AGING)) {
- sw_cfg_fast_aging(hw, 1);
- mdelay(1);
- sw_cfg_fast_aging(hw, 0);
- }
-}
-
-/* VLAN */
-
-static inline void port_cfg_ins_tag(struct ksz_hw *hw, int p, int insert)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG, insert);
-}
-
-static inline void port_cfg_rmv_tag(struct ksz_hw *hw, int p, int remove)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG, remove);
-}
-
-static inline int port_chk_ins_tag(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_INSERT_TAG);
-}
-
-static inline int port_chk_rmv_tag(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_REMOVE_TAG);
-}
-
-static inline void port_cfg_dis_non_vid(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID, set);
-}
-
-static inline void port_cfg_in_filter(struct ksz_hw *hw, int p, int set)
-{
- port_cfg(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER, set);
-}
-
-static inline int port_chk_dis_non_vid(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_DISCARD_NON_VID);
-}
-
-static inline int port_chk_in_filter(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_INGRESS_VLAN_FILTER);
-}
-
/* Mirroring */
static inline void port_cfg_mirror_sniffer(struct ksz_hw *hw, int p, int set)
@@ -1947,28 +1752,6 @@ static void sw_init_mirror(struct ksz_hw *hw)
sw_cfg_mirror_rx_tx(hw, 0);
}
-static inline void sw_cfg_unk_def_deliver(struct ksz_hw *hw, int set)
-{
- sw_cfg(hw, KS8842_SWITCH_CTRL_7_OFFSET,
- SWITCH_UNK_DEF_PORT_ENABLE, set);
-}
-
-static inline int sw_cfg_chk_unk_def_deliver(struct ksz_hw *hw)
-{
- return sw_chk(hw, KS8842_SWITCH_CTRL_7_OFFSET,
- SWITCH_UNK_DEF_PORT_ENABLE);
-}
-
-static inline void sw_cfg_unk_def_port(struct ksz_hw *hw, int port, int set)
-{
- port_cfg_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0, set);
-}
-
-static inline int sw_chk_unk_def_port(struct ksz_hw *hw, int port)
-{
- return port_chk_shift(hw, port, KS8842_SWITCH_CTRL_7_OFFSET, 0);
-}
-
/* Priority */
static inline void port_cfg_diffserv(struct ksz_hw *hw, int p, int set)
@@ -1995,30 +1778,6 @@ static inline void port_cfg_prio(struct ksz_hw *hw, int p, int set)
KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE, set);
}
-static inline int port_chk_diffserv(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_DIFFSERV_ENABLE);
-}
-
-static inline int port_chk_802_1p(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_802_1P_ENABLE);
-}
-
-static inline int port_chk_replace_vid(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_2_OFFSET, PORT_USER_PRIORITY_CEILING);
-}
-
-static inline int port_chk_prio(struct ksz_hw *hw, int p)
-{
- return port_chk(hw, p,
- KS8842_PORT_CTRL_1_OFFSET, PORT_PRIO_QUEUE_ENABLE);
-}
-
/**
* sw_dis_diffserv - disable switch DiffServ priority
* @hw: The hardware instance.
@@ -2218,23 +1977,6 @@ static void sw_cfg_port_base_vlan(struct ksz_hw *hw, int port, u8 member)
hw->ksz_switch->port_cfg[port].member = member;
}
-/**
- * sw_get_addr - get the switch MAC address.
- * @hw: The hardware instance.
- * @mac_addr: Buffer to store the MAC address.
- *
- * This function retrieves the MAC address of the switch.
- */
-static inline void sw_get_addr(struct ksz_hw *hw, u8 *mac_addr)
-{
- int i;
-
- for (i = 0; i < 6; i += 2) {
- mac_addr[i] = readb(hw->io + KS8842_MAC_ADDR_0_OFFSET + i);
- mac_addr[1 + i] = readb(hw->io + KS8842_MAC_ADDR_1_OFFSET + i);
- }
-}
-
/**
* sw_set_addr - configure switch MAC address
* @hw: The hardware instance.
@@ -2432,56 +2174,6 @@ static inline void hw_w_phy_ctrl(struct ksz_hw *hw, int phy, u16 data)
writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
}
-static inline void hw_r_phy_link_stat(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_STATUS_OFFSET);
-}
-
-static inline void hw_r_phy_auto_neg(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
-}
-
-static inline void hw_w_phy_auto_neg(struct ksz_hw *hw, int phy, u16 data)
-{
- writew(data, hw->io + phy + KS884X_PHY_AUTO_NEG_OFFSET);
-}
-
-static inline void hw_r_phy_rem_cap(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_REMOTE_CAP_OFFSET);
-}
-
-static inline void hw_r_phy_crossover(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_CTRL_OFFSET);
-}
-
-static inline void hw_w_phy_crossover(struct ksz_hw *hw, int phy, u16 data)
-{
- writew(data, hw->io + phy + KS884X_PHY_CTRL_OFFSET);
-}
-
-static inline void hw_r_phy_polarity(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
-}
-
-static inline void hw_w_phy_polarity(struct ksz_hw *hw, int phy, u16 data)
-{
- writew(data, hw->io + phy + KS884X_PHY_PHY_CTRL_OFFSET);
-}
-
-static inline void hw_r_phy_link_md(struct ksz_hw *hw, int phy, u16 *data)
-{
- *data = readw(hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
-}
-
-static inline void hw_w_phy_link_md(struct ksz_hw *hw, int phy, u16 data)
-{
- writew(data, hw->io + phy + KS884X_PHY_LINK_MD_OFFSET);
-}
-
/**
* hw_r_phy - read data from PHY register
* @hw: The hardware instance.
--
2.30.2
Powered by blists - more mailing lists