[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230514115741.40423-1-krzysztof.kozlowski@linaro.org>
Date: Sun, 14 May 2023 13:57:41 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4] dt-bindings: net: nxp,sja1105: document spi-cpol/cpha
Some boards use SJA1105 Ethernet Switch with SPI CPHA, while ones with
SJA1110 use SPI CPOL, so document this to fix dtbs_check warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes since v3:
1. Rebase.
2. Require cpha/cpol properties on respective variants (thus update
example).
Changes since v2:
1. Add allOf:if:then, based on feedback from Vladimir.
Changes since v1:
1. Add also cpha.
---
.../bindings/net/dsa/nxp,sja1105.yaml | 32 ++++++++++++++++---
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 9a64ed658745..991448962c93 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -12,10 +12,6 @@ description:
cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
depends on the SPI bus master driver.
-allOf:
- - $ref: dsa.yaml#/$defs/ethernet-ports
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
maintainers:
- Vladimir Oltean <vladimir.oltean@....com>
@@ -36,6 +32,9 @@ properties:
reg:
maxItems: 1
+ spi-cpha: true
+ spi-cpol: true
+
# Optional container node for the 2 internal MDIO buses of the SJA1110
# (one for the internal 100base-T1 PHYs and the other for the single
# 100base-TX PHY). The "reg" property does not have physical significance.
@@ -109,6 +108,30 @@ $defs:
1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - nxp,sja1105e
+ - nxp,sja1105t
+ - nxp,sja1105p
+ - nxp,sja1105q
+ - nxp,sja1105r
+ - nxp,sja1105s
+ then:
+ properties:
+ spi-cpol: false
+ required:
+ - spi-cpha
+ else:
+ properties:
+ spi-cpha: false
+ required:
+ - spi-cpol
+
unevaluatedProperties: false
examples:
@@ -120,6 +143,7 @@ examples:
ethernet-switch@1 {
reg = <0x1>;
compatible = "nxp,sja1105t";
+ spi-cpha;
ethernet-ports {
#address-cells = <1>;
--
2.34.1
Powered by blists - more mailing lists