netdev - Re: [PATCH net 3/3] net: phy: mscc: enable VSC8501/2 RGMII RX clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230521160852.GB2208@nucnuc.mle>
Date: Sun, 21 May 2023 18:08:52 +0200
From: David Epping <david.epping@...singlinkelectronics.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	UNGLinuxDriver@...rochip.com
Subject: Re: [PATCH net 3/3] net: phy: mscc: enable VSC8501/2 RGMII RX clock

On Sun, May 21, 2023 at 04:12:26PM +0300, Vladimir Oltean wrote:
> Ah, no, I think the explanation is much simpler. I see the datasheet
> mentions that "RX_CLK output disable" is a sticky bit, which means it
> preserves its value across a reset.
> 
> In my case, it is the U-Boot driver which clears that setting, as part
> of configuring RGMII delays.
> https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/net/phy/mscc.c#L1553

Thanks for investigating and checking on your hardware.
Yes, my U-Boot does not support VSC850x yet, so Linux is the first
touching the registers.
For completeness: My PHY address is 0.