netdev - [PATCH net-next 12/30] net: dsa: mt7530: move XTAL check to mt7530

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Mon, 22 May 2023 15:15:14 +0300
From: arinc9.unal@...il.com
To: Sean Wang <sean.wang@...iatek.com>,
	Landen Chao <Landen.Chao@...iatek.com>,
	DENG Qingfang <dqfext@...il.com>,
	Daniel Golle <daniel@...rotopia.org>,
	Andrew Lunn <andrew@...n.ch>,
	Florian Fainelli <f.fainelli@...il.com>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	Russell King <linux@...linux.org.uk>
Cc: Arınç ÜNAL <arinc.unal@...nc9.com>,
	Richard van Schagen <richard@...terhints.com>,
	Richard van Schagen <vschagen@...com>,
	Frank Wunderlich <frank-w@...lic-files.de>,
	Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
	erkin.bozoglu@...ont.com,
	mithat.guner@...ont.com,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-mediatek@...ts.infradead.org
Subject: [PATCH net-next 12/30] net: dsa: mt7530: move XTAL check to mt7530_setup()

From: Arınç ÜNAL <arinc.unal@...nc9.com>

The crystal frequency concerns the switch core. The frequency should be
checked when the switch is being set up so the driver can reject the
unsupported hardware earlier and without requiring port 6 to be used.

Move it to mt7530_setup().

Tested-by: Arınç ÜNAL <arinc.unal@...nc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
 drivers/net/dsa/mt7530.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 049f7be0d790..fa48273269c4 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -408,13 +408,6 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
 
 	xtal = mt7530_read(priv, MT7530_HWTRAP) & HWTRAP_XTAL_MASK;
 
-	if (xtal == HWTRAP_XTAL_20MHZ) {
-		dev_err(priv->dev,
-			"%s: MT7530 with a 20MHz XTAL is not supported!\n",
-			__func__);
-		return -EINVAL;
-	}
-
 	switch (interface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		trgint = 0;
@@ -2133,7 +2126,7 @@ mt7530_setup(struct dsa_switch *ds)
 	struct mt7530_dummy_poll p;
 	phy_interface_t interface;
 	struct dsa_port *cpu_dp;
-	u32 id, val;
+	u32 id, val, xtal;
 	int ret, i;
 
 	/* The parent node of master netdev which holds the common system
@@ -2203,6 +2196,15 @@ mt7530_setup(struct dsa_switch *ds)
 		return -ENODEV;
 	}
 
+	xtal = mt7530_read(priv, MT7530_HWTRAP) & HWTRAP_XTAL_MASK;
+
+	if (xtal == HWTRAP_XTAL_20MHZ) {
+		dev_err(priv->dev,
+			"%s: MT7530 with a 20MHz XTAL is not supported!\n",
+			__func__);
+		return -EINVAL;
+	}
+
 	/* Reset the switch through internal reset */
 	mt7530_write(priv, MT7530_SYS_CTRL,
 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
-- 
2.39.2