| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230524144539.62618-7-Parthiban.Veerasooran@microchip.com>
Date: Wed, 24 May 2023 20:15:39 +0530
From: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <ramon.nordin.rodriguez@...roamp.se>
CC: <horatiu.vultur@...rochip.com>, <Woojung.Huh@...rochip.com>,
<Nicolas.Ferre@...rochip.com>, <Thorsten.Kummermehr@...rochip.com>,
"Parthiban Veerasooran" <Parthiban.Veerasooran@...rochip.com>
Subject: [PATCH net-next v3 6/6] net: phy: microchip_t1s: add support for Microchip LAN865x Rev.B0 PHYs
Add support for the Microchip LAN865x Rev.B0 10BASE-T1S Internal PHYs
(LAN8650/1). The LAN865x combines a Media Access Controller (MAC) and an
internal 10BASE-T1S Ethernet PHY to access 10BASE‑T1S networks. As
LAN867X and LAN865X are using the same function for the read_status,
rename the function as lan86xx_read_status.
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
---
drivers/net/phy/microchip_t1s.c | 184 +++++++++++++++++++++++++++++++-
1 file changed, 181 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index 6f9e197d8623..00c4c23906ce 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -4,6 +4,7 @@
*
* Support: Microchip Phys:
* lan8670/1/2 Rev.B1
+ * lan8650/1 Rev.B0 Internal PHYs
*/
#include <linux/kernel.h>
@@ -11,11 +12,19 @@
#include <linux/phy.h>
#define PHY_ID_LAN867X_REVB1 0x0007C162
+#define PHY_ID_LAN865X_REVB0 0x0007C1B3
#define LAN867X_REG_STS2 0x0019
#define LAN867x_RESET_COMPLETE_STS BIT(11)
+#define LAN865X_REG_CFGPARAM_ADDR 0x00D8
+#define LAN865X_REG_CFGPARAM_DATA 0x00D9
+#define LAN865X_REG_CFGPARAM_CTRL 0x00DA
+#define LAN865X_REG_STS2 0x0019
+
+#define LAN865X_CFGPARAM_READ_ENABLE BIT(1)
+
/* The arrays below are pulled from the following table from AN1699
* Access MMD Address Value Mask
* RMW 0x1F 0x00D0 0x0002 0x0E03
@@ -50,6 +59,164 @@ static const u16 lan867x_revb1_fixup_masks[12] = {
0x0600, 0x7F00, 0x2000, 0xFFFF,
};
+/* LAN865x Rev.B0 configuration parameters from AN1760 */
+static const u32 lan865x_revb0_fixup_registers[28] = {
+ 0x0091, 0x0081, 0x0043, 0x0044,
+ 0x0045, 0x0053, 0x0054, 0x0055,
+ 0x0040, 0x0050, 0x00D0, 0x00E9,
+ 0x00F5, 0x00F4, 0x00F8, 0x00F9,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3,
+ 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x00BA, 0x00BB,
+};
+
+static const u16 lan865x_revb0_fixup_values[28] = {
+ 0x9660, 0x00C0, 0x00FF, 0xFFFF,
+ 0x0000, 0x00FF, 0xFFFF, 0x0000,
+ 0x0002, 0x0002, 0x5F21, 0x9E50,
+ 0x1CF8, 0xC020, 0x9B00, 0x4E53,
+ 0x0103, 0x0910, 0x1D26, 0x002A,
+ 0x0103, 0x070D, 0x1720, 0x0027,
+ 0x0509, 0x0E13, 0x1C25, 0x002B,
+};
+
+static const u16 lan865x_revb0_fixup_cfg_regs[5] = {
+ 0x0084, 0x008A, 0x00AD, 0x00AE, 0x00AF
+};
+
+/* Pulled from AN1760 describing 'indirect read'
+ *
+ * write_register(0x4, 0x00D8, addr)
+ * write_register(0x4, 0x00DA, 0x2)
+ * return (int8)(read_register(0x4, 0x00D9))
+ *
+ * 0x4 refers to memory map selector 4, which maps to MDIO_MMD_VEND2
+ */
+static int lan865x_revb0_indirect_read(struct phy_device *phydev, u16 addr)
+{
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_ADDR,
+ addr);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_CTRL,
+ LAN865X_CFGPARAM_READ_ENABLE);
+ if (ret)
+ return ret;
+
+ return phy_read_mmd(phydev, MDIO_MMD_VEND2, LAN865X_REG_CFGPARAM_DATA);
+}
+
+/* This is pulled straight from AN1760 from 'calculation of offset 1' &
+ * 'calculation of offset 2'
+ */
+static int lan865x_generate_cfg_offsets(struct phy_device *phydev, s8 offsets[2])
+{
+ const u16 fixup_regs[2] = {0x0004, 0x0008};
+ int ret;
+
+ for (int i = 0; i < ARRAY_SIZE(fixup_regs); i++) {
+ ret = lan865x_revb0_indirect_read(phydev, fixup_regs[i]);
+ if (ret < 0)
+ return ret;
+ if (ret & BIT(4))
+ offsets[i] = ret | 0xE0;
+ else
+ offsets[i] = ret;
+ }
+
+ return 0;
+}
+
+static int lan865x_read_cfg_params(struct phy_device *phydev, u16 cfg_params[])
+{
+ int ret;
+
+ for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) {
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ lan865x_revb0_fixup_cfg_regs[i]);
+ if (ret < 0)
+ return ret;
+ cfg_params[i] = (u16)ret;
+ }
+
+ return 0;
+}
+
+static int lan865x_write_cfg_params(struct phy_device *phydev, u16 cfg_params[])
+{
+ int ret;
+
+ for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs); i++) {
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ lan865x_revb0_fixup_cfg_regs[i],
+ cfg_params[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lan865x_setup_cfgparam(struct phy_device *phydev)
+{
+ u16 cfg_params[ARRAY_SIZE(lan865x_revb0_fixup_cfg_regs)];
+ u16 cfg_results[5];
+ s8 offsets[2];
+ int ret;
+
+ ret = lan865x_generate_cfg_offsets(phydev, offsets);
+ if (ret)
+ return ret;
+
+ ret = lan865x_read_cfg_params(phydev, cfg_params);
+ if (ret)
+ return ret;
+
+ cfg_results[0] = (cfg_params[0] & 0x000F) |
+ FIELD_PREP(GENMASK(15, 10), 9 + offsets[0]) |
+ FIELD_PREP(GENMASK(15, 4), 14 + offsets[0]);
+ cfg_results[1] = (cfg_params[1] & 0x03FF) |
+ FIELD_PREP(GENMASK(15, 10), 40 + offsets[1]);
+ cfg_results[2] = (cfg_params[2] & 0xC0C0) |
+ FIELD_PREP(GENMASK(15, 8), 5 + offsets[0]) |
+ (9 + offsets[0]);
+ cfg_results[3] = (cfg_params[3] & 0xC0C0) |
+ FIELD_PREP(GENMASK(15, 8), 9 + offsets[0]) |
+ (14 + offsets[0]);
+ cfg_results[4] = (cfg_params[4] & 0xC0C0) |
+ FIELD_PREP(GENMASK(15, 8), 17 + offsets[0]) |
+ (22 + offsets[0]);
+
+ return lan865x_write_cfg_params(phydev, cfg_results);
+}
+
+static int lan865x_revb0_config_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Reference to AN1760
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/AIS/ProductDocuments/SupportingCollateral/AN-LAN8650-1-Configuration-60001760.pdf
+ */
+ for (int i = 0; i < ARRAY_SIZE(lan865x_revb0_fixup_registers); i++) {
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+ lan865x_revb0_fixup_registers[i],
+ lan865x_revb0_fixup_values[i]);
+ if (ret)
+ return ret;
+ }
+ /* Function to calculate and write the configuration parameters in the
+ * 0x0084, 0x008A, 0x00AD, 0x00AE and 0x00AF registers (from AN1760)
+ */
+ ret = lan865x_setup_cfgparam(phydev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int lan867x_revb1_config_init(struct phy_device *phydev)
{
/* HW quirk: Microchip states in the application note (AN1699) for the phy
@@ -107,7 +274,7 @@ static int lan867x_revb1_config_init(struct phy_device *phydev)
return 0;
}
-static int lan867x_read_status(struct phy_device *phydev)
+static int lan86xx_read_status(struct phy_device *phydev)
{
/* The phy has some limitations, namely:
* - always reports link up
@@ -128,17 +295,28 @@ static struct phy_driver microchip_t1s_driver[] = {
.name = "LAN867X Rev.B1",
.features = PHY_BASIC_T1S_P2MP_FEATURES,
.config_init = lan867x_revb1_config_init,
- .read_status = lan867x_read_status,
+ .read_status = lan86xx_read_status,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
- }
+ },
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0),
+ .name = "LAN865X Rev.B0 Internal Phy",
+ .features = PHY_BASIC_T1S_P2MP_FEATURES,
+ .config_init = lan865x_revb0_config_init,
+ .read_status = lan86xx_read_status,
+ .get_plca_cfg = genphy_c45_plca_get_cfg,
+ .set_plca_cfg = genphy_c45_plca_set_cfg,
+ .get_plca_status = genphy_c45_plca_get_status,
+ },
};
module_phy_driver(microchip_t1s_driver);
static struct mdio_device_id __maybe_unused tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_LAN865X_REVB0) },
{ }
};
--
2.34.1
Powered by blists - more mailing lists