lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230529122017.10620-3-harini.katakam@amd.com>
Date: Mon, 29 May 2023 17:50:17 +0530
From: Harini Katakam <harini.katakam@....com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <kuba@...nel.org>, <edumazet@...gle.com>,
	<pabeni@...hat.com>, <vladimir.oltean@....com>,
	<wsa+renesas@...g-engineering.com>, <simon.horman@...igine.com>,
	<david.epping@...singlinkelectronics.com>, <mk+kernel@...linux.org.uk>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<harinikatakamlinux@...il.com>, <michal.simek@....com>,
	<harini.katakam@....com>, <radhey.shyam.pandey@....com>
Subject: [PATCH net-next v5 2/2] phy: mscc: Add support for RGMII delay configuration

Add support for optional rx/tx-internal-delay-ps from devicetree.
- When rx/tx-internal-delay-ps is/are specified, these take priority
- When either is absent,
1) use 2ns for respective settings if rgmii-id/rxid/txid is/are present
2) use 0.2ns for respective settings if mode is rgmii

Signed-off-by: Harini Katakam <harini.katakam@....com>
---
v5:
- Rebase on top VSC8501 series, to avoid conflicts
- Rename _internal_delay to use vsc86xx, move declaration and
simplify format of pointer to above
- Acquire DT delay values in vsc85xx_update_rgmii_cntl instead of
vsc85xx_config_init to accommodate all VSC phy versions
v4:
Fix type of rx_delay and tx_delay
Reported by Simon Horman and
Reported-by: kernel test robot <lkp@...el.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305140248.lh4LUw2j-lkp@intel.com/
v3 - Patch split:
- Use rx/tx-internal-delay-ps with phy_get_internal_delay
- Change RGMII delay selection precedence
- Update commit description and subject everywhere to say RGMII delays
instead of RGMII tuning.

 drivers/net/phy/mscc/mscc_main.c | 35 ++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index fc074bcc894d..669a4a7a28ce 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -107,6 +107,9 @@ static const struct vsc8531_edge_rate_table edge_table[] = {
 };
 #endif
 
+static const int vsc85xx_internal_delay[] = {200, 800, 1100, 1700, 2000, 2300,
+					     2600, 3400};
+
 static int vsc85xx_phy_read_page(struct phy_device *phydev)
 {
 	return __phy_read(phydev, MSCC_EXT_PAGE_ACCESS);
@@ -525,8 +528,12 @@ static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl,
 {
 	u16 rgmii_rx_delay_pos = ffs(rgmii_rx_delay_mask) - 1;
 	u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1;
+	int delay_size = ARRAY_SIZE(vsc85xx_internal_delay);
+	struct device *dev = &phydev->mdio.dev;
 	u16 reg_val = 0;
 	u16 mask = 0;
+	s32 rx_delay;
+	s32 tx_delay;
 	int rc = 0;
 
 	/* For traffic to pass, the VSC8502 family needs the RX_CLK disable bit
@@ -541,12 +548,28 @@ static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl,
 	if (phy_interface_is_rgmii(phydev))
 		mask |= rgmii_rx_delay_mask | rgmii_tx_delay_mask;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-		reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_rx_delay_pos;
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-		reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_tx_delay_pos;
+	rx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay,
+					  delay_size, true);
+	if (rx_delay < 0) {
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+		    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = RGMII_CLK_DELAY_2_0_NS;
+		else
+			rx_delay = RGMII_CLK_DELAY_0_2_NS;
+	}
+
+	tx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay,
+					  delay_size, false);
+	if (tx_delay < 0) {
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+		    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = RGMII_CLK_DELAY_2_0_NS;
+		else
+			rx_delay = RGMII_CLK_DELAY_0_2_NS;
+	}
+
+	reg_val |= rx_delay << rgmii_rx_delay_pos;
+	reg_val |= tx_delay << rgmii_tx_delay_pos;
 
 	if (mask)
 		rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
-- 
2.17.1


Powered by blists - more mailing lists