| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MW4PR11MB5911C95B44EE52B93310A12EBA4B9@MW4PR11MB5911.namprd11.prod.outlook.com>
Date: Tue, 30 May 2023 22:35:50 +0000
From: "Singh, Krishneil K" <krishneil.k.singh@...el.com>
To: "Linga, Pavan Kumar" <pavan.kumar.linga@...el.com>,
"intel-wired-lan@...ts.osuosl.org" <intel-wired-lan@...ts.osuosl.org>
CC: "willemb@...gle.com" <willemb@...gle.com>, "pabeni@...hat.com"
<pabeni@...hat.com>, "leon@...nel.org" <leon@...nel.org>, "mst@...hat.com"
<mst@...hat.com>, "simon.horman@...igine.com" <simon.horman@...igine.com>,
"Brandeburg, Jesse" <jesse.brandeburg@...el.com>,
"stephen@...workplumber.org" <stephen@...workplumber.org>,
"edumazet@...gle.com" <edumazet@...gle.com>, "Nguyen, Anthony L"
<anthony.l.nguyen@...el.com>, "netdev@...r.kernel.org"
<netdev@...r.kernel.org>, "kuba@...nel.org" <kuba@...nel.org>, "Burra, Phani
R" <phani.r.burra@...el.com>, "decot@...gle.com" <decot@...gle.com>,
"davem@...emloft.net" <davem@...emloft.net>, "shannon.nelson@....com"
<shannon.nelson@....com>
Subject: RE: [Intel-wired-lan] [PATCH iwl-next v6 01/15] virtchnl: add
virtchnl version 2 ops
> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@...osl.org> On Behalf Of
> Pavan Kumar Linga
> Sent: Monday, May 22, 2023 5:23 PM
> To: intel-wired-lan@...ts.osuosl.org
> Cc: willemb@...gle.com; pabeni@...hat.com; leon@...nel.org;
> mst@...hat.com; simon.horman@...igine.com; Brandeburg, Jesse
> <jesse.brandeburg@...el.com>; stephen@...workplumber.org;
> edumazet@...gle.com; Nguyen, Anthony L
> <anthony.l.nguyen@...el.com>; netdev@...r.kernel.org; kuba@...nel.org;
> Burra, Phani R <phani.r.burra@...el.com>; decot@...gle.com;
> davem@...emloft.net; shannon.nelson@....com
> Subject: [Intel-wired-lan] [PATCH iwl-next v6 01/15] virtchnl: add virtchnl
> version 2 ops
>
> Virtchnl version 1 is an interface used by the current generation of
> foundational NICs to negotiate the capabilities and configure the
> HW resources such as queues, vectors, RSS LUT, etc between the PF
> and VF drivers. It is not extensible to enable new features supported
> in the next generation of NICs/IPUs and to negotiate descriptor types,
> packet types and register offsets.
>
> To overcome the limitations of the existing interface, introduce
> the virtchnl version 2 and add the necessary opcodes, structures,
> definitions, and descriptor formats. The driver also learns the
> data queue and other register offsets to use instead of hardcoding
> them. The advantage of this approach is that it gives the flexibility
> to modify the register offsets if needed, restrict the use of
> certain descriptor types and negotiate the supported packet types.
>
> Co-developed-by: Alan Brady <alan.brady@...el.com>
> Signed-off-by: Alan Brady <alan.brady@...el.com>
> Co-developed-by: Joshua Hay <joshua.a.hay@...el.com>
> Signed-off-by: Joshua Hay <joshua.a.hay@...el.com>
> Co-developed-by: Madhu Chittim <madhu.chittim@...el.com>
> Signed-off-by: Madhu Chittim <madhu.chittim@...el.com>
> Co-developed-by: Phani Burra <phani.r.burra@...el.com>
> Signed-off-by: Phani Burra <phani.r.burra@...el.com>
> Co-developed-by: Sridhar Samudrala <sridhar.samudrala@...el.com>
> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@...el.com>
> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@...el.com>
> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@...el.com>
> Reviewed-by: Willem de Bruijn <willemb@...gle.com>
> ---
> drivers/net/ethernet/intel/idpf/virtchnl2.h | 1289 +++++++++++++++++
> .../ethernet/intel/idpf/virtchnl2_lan_desc.h | 448 ++++++
> 2 files changed, 1737 insertions(+)
> create mode 100644 drivers/net/ethernet/intel/idpf/virtchnl2.h
> create mode 100644 drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
>
> diff --git a/drivers/net/ethernet/intel/idpf/virtchnl2.h
> b/drivers/net/ethernet/intel/idpf/virtchnl2.h
> new file mode 100644
> index 000000000000..c8eadc98ae9d
> --- /dev/null
> +++ b/drivers/net/ethernet/intel/idpf/virtchnl2.h
> @@ -0,0 +1,1289 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (C) 2023 Intel Corporation */
> +
> +#ifndef _VIRTCHNL2_H_
> +#define _VIRTCHNL2_H_
> +
> +/* All opcodes associated with virtchnl2 are prefixed with virtchnl2 or
> + * VIRTCHNL2. Any future opcodes, offloads/capabilities, structures,
> + * and defines must be prefixed with virtchnl2 or VIRTCHNL2 to avoid
> confusion.
> + *
> + * PF/VF uses the virtchnl2 interface defined in this header file to
> communicate
> + * with device Control Plane (CP). Driver and the CP may run on different
> + * platforms with different endianness. To avoid byte order discrepancies,
> + * struct members in this header follow little-endian format. Users of this
> + * virtchnl2 interface are expected to convert back to their native endian
> + * format.
> + *
> + * This is an interface definition file where existing enums and their values
> + * must remain unchanged over time, so we specify explicit values for all
> enums.
> + */
> +
> +#include "virtchnl2_lan_desc.h"
> +
> +/**
> + * DOC: VIRTCHNL2 error codes
> + *
> + * %VIRTCHNL2_STATUS_ERR_EPERM (1): Operation not permitted, used in
> case of
> + * command not permitted for sender.
> + * %VIRTCHNL2_STATUS_ERR_ESRCH (3): Bad opcode - virtchnl2 interface
> problem.
> + * %VIRTCHNL2_STATUS_ERR_EIO (5): I/O error - HW access error.
> + * %VIRTCHNL2_STATUS_ERR_ENXIO (6): No such resource - Referenced
> resource is
> + * not allocated.
> + * %VIRTCHNL2_STATUS_ERR_EACCES (13): Permission denied - Resource is
> not
> + * permitted to caller.
> + * %VIRTCHNL2_STATUS_ERR_EBUSY (16): Device or resource busy - In case
> shared
> + * resource is in use by others.
> + * %VIRTCHNL2_STATUS_ERR_EEXIST (17): Object already exists and not
> free.
> + * %VIRTCHNL2_STATUS_ERR_EINVAL (22): Invalid input argument in
> command.
> + * %VIRTCHNL2_STATUS_ERR_ENOSPC (28): No space left or allocation
> failure.
> + * %VIRTCHNL2_STATUS_ERR_ERANGE (34): Parameter out of range.
> + * %VIRTCHNL2_STATUS_ERR_EMODE (200): Operation not allowed in
> current dev mode.
> + * %VIRTCHNL2_STATUS_ERR_ESM (201): State Machine error - Command
> sequence problem.
> + */
> +
> +/* This macro is used to generate compilation errors if a structure
> + * is not exactly the correct length.
> + */
> +#define VIRTCHNL2_CHECK_STRUCT_LEN(n, X) \
> + static_assert((n) == sizeof(struct X))
> +
> +/* New major set of opcodes introduced and so leaving room for
> + * old misc opcodes to be added in future. Also these opcodes may only
> + * be used if both the PF and VF have successfully negotiated the
> + * VIRTCHNL version as 2.0 during VIRTCHNL2_OP_VERSION exchange.
> + */
> +enum virtchnl2_op {
> + VIRTCHNL2_OP_UNKNOWN = 0,
> + VIRTCHNL2_OP_VERSION = 1,
> + VIRTCHNL2_OP_GET_CAPS = 500,
> + VIRTCHNL2_OP_CREATE_VPORT = 501,
> + VIRTCHNL2_OP_DESTROY_VPORT = 502,
> + VIRTCHNL2_OP_ENABLE_VPORT = 503,
> + VIRTCHNL2_OP_DISABLE_VPORT = 504,
> + VIRTCHNL2_OP_CONFIG_TX_QUEUES = 505,
> + VIRTCHNL2_OP_CONFIG_RX_QUEUES = 506,
> + VIRTCHNL2_OP_ENABLE_QUEUES = 507,
> + VIRTCHNL2_OP_DISABLE_QUEUES = 508,
> + VIRTCHNL2_OP_ADD_QUEUES = 509,
> + VIRTCHNL2_OP_DEL_QUEUES = 510,
> + VIRTCHNL2_OP_MAP_QUEUE_VECTOR = 511,
> + VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR = 512,
> + VIRTCHNL2_OP_GET_RSS_KEY = 513,
> + VIRTCHNL2_OP_SET_RSS_KEY = 514,
> + VIRTCHNL2_OP_GET_RSS_LUT = 515,
> + VIRTCHNL2_OP_SET_RSS_LUT = 516,
> + VIRTCHNL2_OP_GET_RSS_HASH = 517,
> + VIRTCHNL2_OP_SET_RSS_HASH = 518,
> + VIRTCHNL2_OP_SET_SRIOV_VFS = 519,
> + VIRTCHNL2_OP_ALLOC_VECTORS = 520,
> + VIRTCHNL2_OP_DEALLOC_VECTORS = 521,
> + VIRTCHNL2_OP_EVENT = 522,
> + VIRTCHNL2_OP_GET_STATS = 523,
> + VIRTCHNL2_OP_RESET_VF = 524,
> + VIRTCHNL2_OP_GET_EDT_CAPS = 525,
> + VIRTCHNL2_OP_GET_PTYPE_INFO = 526,
> + /* Opcode 527 and 528 are reserved for
> VIRTCHNL2_OP_GET_PTYPE_ID and
> + * VIRTCHNL2_OP_GET_PTYPE_INFO_RAW.
> + * Opcodes 529, 530, 531, 532 and 533 are reserved.
> + */
> + VIRTCHNL2_OP_LOOPBACK = 534,
> + VIRTCHNL2_OP_ADD_MAC_ADDR = 535,
> + VIRTCHNL2_OP_DEL_MAC_ADDR = 536,
> + VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE = 537,
> +};
> +
> +/**
> + * enum virtchnl2_vport_type - Type of virtual port.
> + * @VIRTCHNL2_VPORT_TYPE_DEFAULT: Default virtual port type.
> + */
> +enum virtchnl2_vport_type {
> + VIRTCHNL2_VPORT_TYPE_DEFAULT = 0,
> +};
> +
> +/**
> + * enum virtchnl2_queue_model - Type of queue model.
> + * @VIRTCHNL2_QUEUE_MODEL_SINGLE: Single queue model.
> + * @VIRTCHNL2_QUEUE_MODEL_SPLIT: Split queue model.
> + *
> + * In the single queue model, the same transmit descriptor queue is used by
> + * software to post descriptors to hardware and by hardware to post
> completed
> + * descriptors to software.
> + * Likewise, the same receive descriptor queue is used by hardware to post
> + * completions to software and by software to post buffers to hardware.
> + *
> + * In the split queue model, hardware uses transmit completion queues to
> post
> + * descriptor/buffer completions to software, while software uses transmit
> + * descriptor queues to post descriptors to hardware.
> + * Likewise, hardware posts descriptor completions to the receive
> descriptor
> + * queue, while software uses receive buffer queues to post buffers to
> hardware.
> + */
> +enum virtchnl2_queue_model {
> + VIRTCHNL2_QUEUE_MODEL_SINGLE = 0,
> + VIRTCHNL2_QUEUE_MODEL_SPLIT = 1,
> +};
> +
> +/* Checksum offload capability flags */
> +enum virtchnl2_cap_txrx_csum {
> + VIRTCHNL2_CAP_TX_CSUM_L3_IPV4 = BIT(0),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP = BIT(1),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP = BIT(2),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP = BIT(3),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP = BIT(4),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP = BIT(5),
> + VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP = BIT(6),
> + VIRTCHNL2_CAP_TX_CSUM_GENERIC = BIT(7),
> + VIRTCHNL2_CAP_RX_CSUM_L3_IPV4 = BIT(8),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP = BIT(9),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP = BIT(10),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP = BIT(11),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP = BIT(12),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP = BIT(13),
> + VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP = BIT(14),
> + VIRTCHNL2_CAP_RX_CSUM_GENERIC = BIT(15),
> + VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL = BIT(16),
> + VIRTCHNL2_CAP_TX_CSUM_L3_DOUBLE_TUNNEL = BIT(17),
> + VIRTCHNL2_CAP_RX_CSUM_L3_SINGLE_TUNNEL = BIT(18),
> + VIRTCHNL2_CAP_RX_CSUM_L3_DOUBLE_TUNNEL = BIT(19),
> + VIRTCHNL2_CAP_TX_CSUM_L4_SINGLE_TUNNEL = BIT(20),
> + VIRTCHNL2_CAP_TX_CSUM_L4_DOUBLE_TUNNEL = BIT(21),
> + VIRTCHNL2_CAP_RX_CSUM_L4_SINGLE_TUNNEL = BIT(22),
> + VIRTCHNL2_CAP_RX_CSUM_L4_DOUBLE_TUNNEL = BIT(23),
> +};
> +
> +/* Segmentation offload capability flags */
> +enum virtchnl2_cap_seg {
> + VIRTCHNL2_CAP_SEG_IPV4_TCP = BIT(0),
> + VIRTCHNL2_CAP_SEG_IPV4_UDP = BIT(1),
> + VIRTCHNL2_CAP_SEG_IPV4_SCTP = BIT(2),
> + VIRTCHNL2_CAP_SEG_IPV6_TCP = BIT(3),
> + VIRTCHNL2_CAP_SEG_IPV6_UDP = BIT(4),
> + VIRTCHNL2_CAP_SEG_IPV6_SCTP = BIT(5),
> + VIRTCHNL2_CAP_SEG_GENERIC = BIT(6),
> + VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL = BIT(7),
> + VIRTCHNL2_CAP_SEG_TX_DOUBLE_TUNNEL = BIT(8),
> +};
> +
> +/* Receive Side Scaling Flow type capability flags */
> +enum virtcnl2_cap_rss {
> + VIRTCHNL2_CAP_RSS_IPV4_TCP = BIT(0),
> + VIRTCHNL2_CAP_RSS_IPV4_UDP = BIT(1),
> + VIRTCHNL2_CAP_RSS_IPV4_SCTP = BIT(2),
> + VIRTCHNL2_CAP_RSS_IPV4_OTHER = BIT(3),
> + VIRTCHNL2_CAP_RSS_IPV6_TCP = BIT(4),
> + VIRTCHNL2_CAP_RSS_IPV6_UDP = BIT(5),
> + VIRTCHNL2_CAP_RSS_IPV6_SCTP = BIT(6),
> + VIRTCHNL2_CAP_RSS_IPV6_OTHER = BIT(7),
> + VIRTCHNL2_CAP_RSS_IPV4_AH = BIT(8),
> + VIRTCHNL2_CAP_RSS_IPV4_ESP = BIT(9),
> + VIRTCHNL2_CAP_RSS_IPV4_AH_ESP = BIT(10),
> + VIRTCHNL2_CAP_RSS_IPV6_AH = BIT(11),
> + VIRTCHNL2_CAP_RSS_IPV6_ESP = BIT(12),
> + VIRTCHNL2_CAP_RSS_IPV6_AH_ESP = BIT(13),
> +};
> +
> +/* Header split capability flags */
> +enum virtchnl2_cap_rx_hsplit_at {
> + /* for prepended metadata */
> + VIRTCHNL2_CAP_RX_HSPLIT_AT_L2 = BIT(0),
> + /* all VLANs go into header buffer */
> + VIRTCHNL2_CAP_RX_HSPLIT_AT_L3 = BIT(1),
> + VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4 = BIT(2),
> + VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6 = BIT(3),
> +};
> +
> +/* Receive Side Coalescing offload capability flags */
> +enum virtchnl2_cap_rsc {
> + VIRTCHNL2_CAP_RSC_IPV4_TCP = BIT(0),
> + VIRTCHNL2_CAP_RSC_IPV4_SCTP = BIT(1),
> + VIRTCHNL2_CAP_RSC_IPV6_TCP = BIT(2),
> + VIRTCHNL2_CAP_RSC_IPV6_SCTP = BIT(3),
> +};
> +
> +/* Other capability flags */
> +enum virtchnl2_cap_other {
> + VIRTCHNL2_CAP_RDMA = BIT_ULL(0),
> + VIRTCHNL2_CAP_SRIOV = BIT_ULL(1),
> + VIRTCHNL2_CAP_MACFILTER = BIT_ULL(2),
> + VIRTCHNL2_CAP_FLOW_DIRECTOR = BIT_ULL(3),
> + /* Queue based scheduling using split queue model */
> + VIRTCHNL2_CAP_SPLITQ_QSCHED = BIT_ULL(4),
> + VIRTCHNL2_CAP_CRC = BIT_ULL(5),
> + VIRTCHNL2_CAP_ADQ = BIT_ULL(6),
> + VIRTCHNL2_CAP_WB_ON_ITR = BIT_ULL(7),
> + VIRTCHNL2_CAP_PROMISC = BIT_ULL(8),
> + VIRTCHNL2_CAP_LINK_SPEED = BIT_ULL(9),
> + VIRTCHNL2_CAP_INLINE_IPSEC = BIT_ULL(10),
> + VIRTCHNL2_CAP_LARGE_NUM_QUEUES =
> BIT_ULL(11),
> + VIRTCHNL2_CAP_VLAN = BIT_ULL(12),
> + VIRTCHNL2_CAP_PTP = BIT_ULL(13),
> + /* EDT: Earliest Departure Time capability used for Timing Wheel */
> + VIRTCHNL2_CAP_EDT = BIT_ULL(14),
> + VIRTCHNL2_CAP_ADV_RSS = BIT_ULL(15),
> + VIRTCHNL2_CAP_FDIR = BIT_ULL(16),
> + VIRTCHNL2_CAP_RX_FLEX_DESC = BIT_ULL(17),
> + VIRTCHNL2_CAP_PTYPE = BIT_ULL(18),
> + VIRTCHNL2_CAP_LOOPBACK = BIT_ULL(19),
> + /* Other capability 20 is reserved */
> +
> + /* this must be the last capability */
> + VIRTCHNL2_CAP_OEM = BIT_ULL(63),
> +};
> +
> +/* underlying device type */
> +enum virtchl2_device_type {
> + VIRTCHNL2_MEV_DEVICE = 0,
> +};
> +
> +/**
> + * enum virtcnl2_txq_sched_mode - Transmit Queue Scheduling Modes.
> + * @VIRTCHNL2_TXQ_SCHED_MODE_QUEUE: Queue mode is the legacy
> mode i.e. inorder
> + * completions where descriptors and buffers
> + * are completed at the same time.
> + * @VIRTCHNL2_TXQ_SCHED_MODE_FLOW: Flow scheduling mode allows
> for out of order
> + * packet processing where descriptors are
> + * cleaned in order, but buffers can be
> + * completed out of order.
> + */
> +enum virtcnl2_txq_sched_mode {
> + VIRTCHNL2_TXQ_SCHED_MODE_QUEUE = 0,
> + VIRTCHNL2_TXQ_SCHED_MODE_FLOW = 1,
> +};
> +
> +/**
> + * enum virtchnl2_rxq_flags - Receive Queue Feature flags.
> + * @VIRTCHNL2_RXQ_RSC: Rx queue RSC flag.
> + * @VIRTCHNL2_RXQ_HDR_SPLIT: Rx queue header split flag.
> + * @VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK: When set, packet
> descriptors are flushed
> + * by hardware immediately after
> processing
> + * each packet.
> + * @VIRTCHNL2_RX_DESC_SIZE_16BYTE: Rx queue 16 byte descriptor size.
> + * @VIRTCHNL2_RX_DESC_SIZE_32BYTE: Rx queue 32 byte descriptor size.
> + */
> +enum virtchnl2_rxq_flags {
> + VIRTCHNL2_RXQ_RSC = BIT(0),
> + VIRTCHNL2_RXQ_HDR_SPLIT = BIT(1),
> + VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK = BIT(2),
> + VIRTCHNL2_RX_DESC_SIZE_16BYTE = BIT(3),
> + VIRTCHNL2_RX_DESC_SIZE_32BYTE = BIT(4),
> +};
> +
> +/* Type of RSS algorithm */
> +enum virtcnl2_rss_alg {
> + VIRTCHNL2_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0,
> + VIRTCHNL2_RSS_ALG_R_ASYMMETRIC = 1,
> + VIRTCHNL2_RSS_ALG_TOEPLITZ_SYMMETRIC = 2,
> + VIRTCHNL2_RSS_ALG_XOR_SYMMETRIC = 3,
> +};
> +
> +/* Type of event */
> +enum virtchnl2_event_codes {
> + VIRTCHNL2_EVENT_UNKNOWN = 0,
> + VIRTCHNL2_EVENT_LINK_CHANGE = 1,
> + /* Event type 2, 3 are reserved */
> +};
> +
> +/* Transmit and Receive queue types are valid in legacy as well as split
> queue
> + * models. With Split Queue model, 2 additional types are introduced -
> + * TX_COMPLETION and RX_BUFFER. In split queue model, receive
> corresponds to
> + * the queue where hardware posts completions.
> + */
> +enum virtchnl2_queue_type {
> + VIRTCHNL2_QUEUE_TYPE_TX = 0,
> + VIRTCHNL2_QUEUE_TYPE_RX = 1,
> + VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION = 2,
> + VIRTCHNL2_QUEUE_TYPE_RX_BUFFER = 3,
> + VIRTCHNL2_QUEUE_TYPE_CONFIG_TX = 4,
> + VIRTCHNL2_QUEUE_TYPE_CONFIG_RX = 5,
> + /* Queue types 6, 7, 8, 9 are reserved */
> + VIRTCHNL2_QUEUE_TYPE_MBX_TX = 10,
> + VIRTCHNL2_QUEUE_TYPE_MBX_RX = 11,
> +};
> +
> +/* Interrupt throttling rate index */
> +enum virtchnl2_itr_idx {
> + VIRTCHNL2_ITR_IDX_0 = 0,
> + VIRTCHNL2_ITR_IDX_1 = 1,
> +};
> +
> +/**
> + * enum virtchnl2_mac_addr_type - MAC address types.
> + * @VIRTCHNL2_MAC_ADDR_PRIMARY: PF/VF driver should set this type
> for the
> + * primary/device unicast MAC address filter for
> + * VIRTCHNL2_OP_ADD_MAC_ADDR and
> VIRTCHNL2_OP_DEL_MAC_ADDR.
> + * This allows for the underlying control plane
> + * function to accurately track the MAC address
> and for
> + * VM/function reset.
> + *
> + * @VIRTCHNL2_MAC_ADDR_EXTRA: PF/VF driver should set this type for
> any extra unicast
> + * and/or multicast filters that are being
> added/deleted via
> + * VIRTCHNL2_OP_ADD_MAC_ADDR or
> VIRTCHNL2_OP_DEL_MAC_ADDR.
> + */
> +enum virtchnl2_mac_addr_type {
> + VIRTCHNL2_MAC_ADDR_PRIMARY = 1,
> + VIRTCHNL2_MAC_ADDR_EXTRA = 2,
> +};
> +
> +/* Flags used for promiscuous mode */
> +enum virtchnl2_promisc_flags {
> + VIRTCHNL2_UNICAST_PROMISC = BIT(0),
> + VIRTCHNL2_MULTICAST_PROMISC = BIT(1),
> +};
> +
> +/* Protocol header type within a packet segment. A segment consists of
> one or
> + * more protocol headers that make up a logical group of protocol headers.
> Each
> + * logical group of protocol headers encapsulates or is encapsulated
> using/by
> + * tunneling or encapsulation protocols for network virtualization.
> + */
> +enum virtchnl2_proto_hdr_type {
> + /* VIRTCHNL2_PROTO_HDR_ANY is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_ANY = 0,
> + VIRTCHNL2_PROTO_HDR_PRE_MAC = 1,
> + /* VIRTCHNL2_PROTO_HDR_MAC is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_MAC = 2,
> + VIRTCHNL2_PROTO_HDR_POST_MAC = 3,
> + VIRTCHNL2_PROTO_HDR_ETHERTYPE = 4,
> + VIRTCHNL2_PROTO_HDR_VLAN = 5,
> + VIRTCHNL2_PROTO_HDR_SVLAN = 6,
> + VIRTCHNL2_PROTO_HDR_CVLAN = 7,
> + VIRTCHNL2_PROTO_HDR_MPLS = 8,
> + VIRTCHNL2_PROTO_HDR_UMPLS = 9,
> + VIRTCHNL2_PROTO_HDR_MMPLS = 10,
> + VIRTCHNL2_PROTO_HDR_PTP = 11,
> + VIRTCHNL2_PROTO_HDR_CTRL = 12,
> + VIRTCHNL2_PROTO_HDR_LLDP = 13,
> + VIRTCHNL2_PROTO_HDR_ARP = 14,
> + VIRTCHNL2_PROTO_HDR_ECP = 15,
> + VIRTCHNL2_PROTO_HDR_EAPOL = 16,
> + VIRTCHNL2_PROTO_HDR_PPPOD = 17,
> + VIRTCHNL2_PROTO_HDR_PPPOE = 18,
> + /* VIRTCHNL2_PROTO_HDR_IPV4 is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_IPV4 = 19,
> + /* IPv4 and IPv6 Fragment header types are only associated to
> + * VIRTCHNL2_PROTO_HDR_IPV4 and VIRTCHNL2_PROTO_HDR_IPV6
> respectively,
> + * cannot be used independently.
> + */
> + /* VIRTCHNL2_PROTO_HDR_IPV4_FRAG is a mandatory protocol id
> */
> + VIRTCHNL2_PROTO_HDR_IPV4_FRAG = 20,
> + /* VIRTCHNL2_PROTO_HDR_IPV6 is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_IPV6 = 21,
> + /* VIRTCHNL2_PROTO_HDR_IPV6_FRAG is a mandatory protocol id
> */
> + VIRTCHNL2_PROTO_HDR_IPV6_FRAG = 22,
> + VIRTCHNL2_PROTO_HDR_IPV6_EH = 23,
> + /* VIRTCHNL2_PROTO_HDR_UDP is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_UDP = 24,
> + /* VIRTCHNL2_PROTO_HDR_TCP is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_TCP = 25,
> + /* VIRTCHNL2_PROTO_HDR_SCTP is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_SCTP = 26,
> + /* VIRTCHNL2_PROTO_HDR_ICMP is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_ICMP = 27,
> + /* VIRTCHNL2_PROTO_HDR_ICMPV6 is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_ICMPV6 = 28,
> + VIRTCHNL2_PROTO_HDR_IGMP = 29,
> + VIRTCHNL2_PROTO_HDR_AH = 30,
> + VIRTCHNL2_PROTO_HDR_ESP = 31,
> + VIRTCHNL2_PROTO_HDR_IKE = 32,
> + VIRTCHNL2_PROTO_HDR_NATT_KEEP = 33,
> + /* VIRTCHNL2_PROTO_HDR_PAY is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_PAY = 34,
> + VIRTCHNL2_PROTO_HDR_L2TPV2 = 35,
> + VIRTCHNL2_PROTO_HDR_L2TPV2_CONTROL = 36,
> + VIRTCHNL2_PROTO_HDR_L2TPV3 = 37,
> + VIRTCHNL2_PROTO_HDR_GTP = 38,
> + VIRTCHNL2_PROTO_HDR_GTP_EH = 39,
> + VIRTCHNL2_PROTO_HDR_GTPCV2 = 40,
> + VIRTCHNL2_PROTO_HDR_GTPC_TEID = 41,
> + VIRTCHNL2_PROTO_HDR_GTPU = 42,
> + VIRTCHNL2_PROTO_HDR_GTPU_UL = 43,
> + VIRTCHNL2_PROTO_HDR_GTPU_DL = 44,
> + VIRTCHNL2_PROTO_HDR_ECPRI = 45,
> + VIRTCHNL2_PROTO_HDR_VRRP = 46,
> + VIRTCHNL2_PROTO_HDR_OSPF = 47,
> + /* VIRTCHNL2_PROTO_HDR_TUN is a mandatory protocol id */
> + VIRTCHNL2_PROTO_HDR_TUN = 48,
> + VIRTCHNL2_PROTO_HDR_GRE = 49,
> + VIRTCHNL2_PROTO_HDR_NVGRE = 50,
> + VIRTCHNL2_PROTO_HDR_VXLAN = 51,
> + VIRTCHNL2_PROTO_HDR_VXLAN_GPE = 52,
> + VIRTCHNL2_PROTO_HDR_GENEVE = 53,
> + VIRTCHNL2_PROTO_HDR_NSH = 54,
> + VIRTCHNL2_PROTO_HDR_QUIC = 55,
> + VIRTCHNL2_PROTO_HDR_PFCP = 56,
> + VIRTCHNL2_PROTO_HDR_PFCP_NODE = 57,
> + VIRTCHNL2_PROTO_HDR_PFCP_SESSION = 58,
> + VIRTCHNL2_PROTO_HDR_RTP = 59,
> + VIRTCHNL2_PROTO_HDR_ROCE = 60,
> + VIRTCHNL2_PROTO_HDR_ROCEV1 = 61,
> + VIRTCHNL2_PROTO_HDR_ROCEV2 = 62,
> + /* Protocol ids up to 32767 are reserved.
> + * 32768 - 65534 are used for user defined protocol ids.
> + * VIRTCHNL2_PROTO_HDR_NO_PROTO is a mandatory protocol id.
> + */
> + VIRTCHNL2_PROTO_HDR_NO_PROTO = 65535,
> +};
> +
> +enum virtchl2_version {
> + VIRTCHNL2_VERSION_MINOR_0 = 0,
> + VIRTCHNL2_VERSION_MAJOR_2 = 2,
> +};
> +
> +/**
> + * struct virtchnl2_edt_caps - Get EDT granularity and time horizon.
> + * @tstamp_granularity_ns: Timestamp granularity in nanoseconds.
> + * @time_horizon_ns: Total time window in nanoseconds.
> + *
> + * Associated with VIRTCHNL2_OP_GET_EDT_CAPS.
> + */
> +struct virtchnl2_edt_caps {
> + __le64 tstamp_granularity_ns;
> + __le64 time_horizon_ns;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_edt_caps);
> +
> +/**
> + * struct virtchnl2_version_info - Version information.
> + * @major: Major version.
> + * @minor: Minor version.
> + *
> + * PF/VF posts its version number to the CP. CP responds with its version
> number
> + * in the same format, along with a return code.
> + * If there is a major version mismatch, then the PF/VF cannot operate.
> + * If there is a minor version mismatch, then the PF/VF can operate but
> should
> + * add a warning to the system log.
> + *
> + * This version opcode MUST always be specified as == 1, regardless of
> other
> + * changes in the API. The CP must always respond to this message without
> + * error regardless of version mismatch.
> + *
> + * Associated with VIRTCHNL2_OP_VERSION.
> + */
> +struct virtchnl2_version_info {
> + __le32 major;
> + __le32 minor;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_version_info);
> +
> +/**
> + * struct virtchnl2_get_capabilities - Capabilities info.
> + * @csum_caps: See enum virtchnl2_cap_txrx_csum.
> + * @seg_caps: See enum virtchnl2_cap_seg.
> + * @hsplit_caps: See enum virtchnl2_cap_rx_hsplit_at.
> + * @rsc_caps: See enum virtchnl2_cap_rsc.
> + * @rss_caps: See enum virtcnl2_cap_rss.
> + * @other_caps: See enum virtchnl2_cap_other.
> + * @mailbox_dyn_ctl: DYN_CTL register offset and vector id for mailbox
> provided by CP.
> + * @mailbox_vector_id: Mailbox vector id.
> + * @num_allocated_vectors: Maximum number of allocated vectors for the
> device.
> + * @max_rx_q: Maximum number of supported Rx queues.
> + * @max_tx_q: Maximum number of supported Tx queues.
> + * @max_rx_bufq: Maximum number of supported buffer queues.
> + * @max_tx_complq: Maximum number of supported completion queues.
> + * @max_sriov_vfs: The PF sends the maximum VFs it is requesting. The CP
> + * responds with the maximum VFs granted.
> + * @max_vports: Maximum number of vports that can be supported.
> + * @default_num_vports: Default number of vports driver should allocate
> on load.
> + * @max_tx_hdr_size: Max header length hardware can parse/checksum,
> in bytes.
> + * @max_sg_bufs_per_tx_pkt: Max number of scatter gather buffers that
> can be sent
> + * per transmit packet without needing to be
> linearized.
> + * @pad: Padding.
> + * @reserved: Reserved.
> + * @device_type: See enum virtchl2_device_type.
> + * @min_sso_packet_len: Min packet length supported by device for single
> + * segment offload.
> + * @max_hdr_buf_per_lso: Max number of header buffers that can be
> used for an LSO.
> + * @pad1: Padding for future extensions.
> + *
> + * Dataplane driver sends this message to CP to negotiate capabilities and
> + * provides a virtchnl2_get_capabilities structure with its desired
> + * capabilities, max_sriov_vfs and num_allocated_vectors.
> + * CP responds with a virtchnl2_get_capabilities structure updated
> + * with allowed capabilities and the other fields as below.
> + * If PF sets max_sriov_vfs as 0, CP will respond with max number of VFs
> + * that can be created by this PF. For any other value 'n', CP responds
> + * with max_sriov_vfs set to min(n, x) where x is the max number of VFs
> + * allowed by CP's policy. max_sriov_vfs is not applicable for VFs.
> + * If dataplane driver sets num_allocated_vectors as 0, CP will respond with
> 1
> + * which is default vector associated with the default mailbox. For any other
> + * value 'n', CP responds with a value <= n based on the CP's policy of
> + * max number of vectors for a PF.
> + * CP will respond with the vector ID of mailbox allocated to the PF in
> + * mailbox_vector_id and the number of itr index registers in itr_idx_map.
> + * It also responds with default number of vports that the dataplane driver
> + * should comeup with in default_num_vports and maximum number of
> vports that
> + * can be supported in max_vports.
> + *
> + * Associated with VIRTCHNL2_OP_GET_CAPS.
> + */
> +struct virtchnl2_get_capabilities {
> + __le32 csum_caps;
> + __le32 seg_caps;
> + __le32 hsplit_caps;
> + __le32 rsc_caps;
> + __le64 rss_caps;
> + __le64 other_caps;
> + __le32 mailbox_dyn_ctl;
> + __le16 mailbox_vector_id;
> + __le16 num_allocated_vectors;
> + __le16 max_rx_q;
> + __le16 max_tx_q;
> + __le16 max_rx_bufq;
> + __le16 max_tx_complq;
> + __le16 max_sriov_vfs;
> + __le16 max_vports;
> + __le16 default_num_vports;
> + __le16 max_tx_hdr_size;
> + u8 max_sg_bufs_per_tx_pkt;
> + u8 pad[3];
> + u8 reserved[4];
> + __le32 device_type;
> + u8 min_sso_packet_len;
> + u8 max_hdr_buf_per_lso;
> + u8 pad1[10];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(80, virtchnl2_get_capabilities);
> +
> +/**
> + * struct virtchnl2_queue_reg_chunk - Single queue chunk.
> + * @type: See enum virtchnl2_queue_type.
> + * @start_queue_id: Start Queue ID.
> + * @num_queues: Number of queues in the chunk.
> + * @pad: Padding.
> + * @qtail_reg_start: Queue tail register offset.
> + * @qtail_reg_spacing: Queue tail register spacing.
> + * @pad1: Padding for future extensions.
> + */
> +struct virtchnl2_queue_reg_chunk {
> + __le32 type;
> + __le32 start_queue_id;
> + __le32 num_queues;
> + __le32 pad;
> + __le64 qtail_reg_start;
> + __le32 qtail_reg_spacing;
> + u8 pad1[4];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_queue_reg_chunk);
> +
> +/**
> + * struct virtchnl2_queue_reg_chunks - Specify several chunks of
> contiguous queues.
> + * @num_chunks: Number of chunks.
> + * @pad: Padding.
> + * @chunks: Chunks of queue info.
> + */
> +struct virtchnl2_queue_reg_chunks {
> + __le16 num_chunks;
> + u8 pad[6];
> + struct virtchnl2_queue_reg_chunk chunks[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_reg_chunks);
> +
> +/**
> + * struct virtchnl2_create_vport - Create vport config info.
> + * @vport_type: See enum virtchnl2_vport_type.
> + * @txq_model: See virtchnl2_queue_model.
> + * @rxq_model: See virtchnl2_queue_model.
> + * @num_tx_q: Number of Tx queues.
> + * @num_tx_complq: Valid only if txq_model is split queue.
> + * @num_rx_q: Number of Rx queues.
> + * @num_rx_bufq: Valid only if rxq_model is split queue.
> + * @default_rx_q: Relative receive queue index to be used as default.
> + * @vport_index: Used to align PF and CP in case of default multiple vports,
> + * it is filled by the PF and CP returns the same value, to
> + * enable the driver to support multiple asynchronous parallel
> + * CREATE_VPORT requests and associate a response to a
> specific
> + * request.
> + * @max_mtu: Max MTU. CP populates this field on response.
> + * @vport_id: Vport id. CP populates this field on response.
> + * @default_mac_addr: Default MAC address.
> + * @pad: Padding.
> + * @rx_desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions.
> + * @tx_desc_ids: See VIRTCHNL2_TX_DESC_IDS definitions.
> + * @pad1: Padding.
> + * @rss_algorithm: RSS algorithm.
> + * @rss_key_size: RSS key size.
> + * @rss_lut_size: RSS LUT size.
> + * @rx_split_pos: See enum virtchnl2_cap_rx_hsplit_at.
> + * @pad2: Padding.
> + * @chunks: Chunks of contiguous queues.
> + *
> + * PF sends this message to CP to create a vport by filling in required
> + * fields of virtchnl2_create_vport structure.
> + * CP responds with the updated virtchnl2_create_vport structure
> containing the
> + * necessary fields followed by chunks which in turn will have an array of
> + * num_chunks entries of virtchnl2_queue_chunk structures.
> + *
> + * Associated with VIRTCHNL2_OP_CREATE_VPORT.
> + */
> +struct virtchnl2_create_vport {
> + __le16 vport_type;
> + __le16 txq_model;
> + __le16 rxq_model;
> + __le16 num_tx_q;
> + __le16 num_tx_complq;
> + __le16 num_rx_q;
> + __le16 num_rx_bufq;
> + __le16 default_rx_q;
> + __le16 vport_index;
> + /* CP populates the following fields on response */
> + __le16 max_mtu;
> + __le32 vport_id;
> + u8 default_mac_addr[ETH_ALEN];
> + __le16 pad;
> + __le64 rx_desc_ids;
> + __le64 tx_desc_ids;
> + u8 pad1[72];
> + __le32 rss_algorithm;
> + __le16 rss_key_size;
> + __le16 rss_lut_size;
> + __le32 rx_split_pos;
> + u8 pad2[20];
> + struct virtchnl2_queue_reg_chunks chunks;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(160, virtchnl2_create_vport);
> +
> +/**
> + * struct virtchnl2_vport - Vport ID info.
> + * @vport_id: Vport id.
> + * @pad: Padding for future extensions.
> + *
> + * PF sends this message to CP to destroy, enable or disable a vport by filling
> + * in the vport_id in virtchnl2_vport structure.
> + * CP responds with the status of the requested operation.
> + *
> + * Associated with VIRTCHNL2_OP_DESTROY_VPORT,
> VIRTCHNL2_OP_ENABLE_VPORT,
> + * VIRTCHNL2_OP_DISABLE_VPORT.
> + */
> +struct virtchnl2_vport {
> + __le32 vport_id;
> + u8 pad[4];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_vport);
> +
> +/**
> + * struct virtchnl2_txq_info - Transmit queue config info
> + * @dma_ring_addr: DMA address.
> + * @type: See enum virtchnl2_queue_type.
> + * @queue_id: Queue ID.
> + * @relative_queue_id: Valid only if queue model is split and type is
> transmit
> + * queue. Used in many to one mapping of transmit queues
> to
> + * completion queue.
> + * @model: See enum virtchnl2_queue_model.
> + * @sched_mode: See enum virtcnl2_txq_sched_mode.
> + * @qflags: TX queue feature flags.
> + * @ring_len: Ring length.
> + * @tx_compl_queue_id: Valid only if queue model is split and type is
> transmit queue.
> + * @peer_type: Valid only if queue type is
> VIRTCHNL2_QUEUE_TYPE_MAILBOX_TX
> + * @peer_rx_queue_id: Valid only if queue type is CONFIG_TX and used to
> deliver
> + * messages for the respective CONFIG_TX queue.
> + * @pad: Padding.
> + * @egress_pasid: Egress PASID info.
> + * @egress_hdr_pasid: Egress HDR passid.
> + * @egress_buf_pasid: Egress buf passid.
> + * @pad1: Padding for future extensions.
> + */
> +struct virtchnl2_txq_info {
> + __le64 dma_ring_addr;
> + __le32 type;
> + __le32 queue_id;
> + __le16 relative_queue_id;
> + __le16 model;
> + __le16 sched_mode;
> + __le16 qflags;
> + __le16 ring_len;
> + __le16 tx_compl_queue_id;
> + __le16 peer_type;
> + __le16 peer_rx_queue_id;
> + u8 pad[4];
> + __le32 egress_pasid;
> + __le32 egress_hdr_pasid;
> + __le32 egress_buf_pasid;
> + u8 pad1[8];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(56, virtchnl2_txq_info);
> +
> +/**
> + * struct virtchnl2_config_tx_queues - TX queue config.
> + * @vport_id: Vport id.
> + * @num_qinfo: Number of virtchnl2_txq_info structs.
> + * @pad: Padding.
> + * @qinfo: Tx queues config info.
> + *
> + * PF sends this message to set up parameters for one or more transmit
> queues.
> + * This message contains an array of num_qinfo instances of
> virtchnl2_txq_info
> + * structures. CP configures requested queues and returns a status code. If
> + * num_qinfo specified is greater than the number of queues associated
> with the
> + * vport, an error is returned and no queues are configured.
> + *
> + * Associated with VIRTCHNL2_OP_CONFIG_TX_QUEUES.
> + */
> +struct virtchnl2_config_tx_queues {
> + __le32 vport_id;
> + __le16 num_qinfo;
> + u8 pad[10];
> + struct virtchnl2_txq_info qinfo[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_config_tx_queues);
> +
> +/**
> + * struct virtchnl2_rxq_info - Receive queue config info.
> + * @desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions.
> + * @dma_ring_addr: See VIRTCHNL2_RX_DESC_IDS definitions.
> + * @type: See enum virtchnl2_queue_type.
> + * @queue_id: Queue id.
> + * @model: See enum virtchnl2_queue_model.
> + * @hdr_buffer_size: Header buffer size.
> + * @data_buffer_size: Data buffer size.
> + * @max_pkt_size: Max packet size.
> + * @ring_len: Ring length.
> + * @buffer_notif_stride: Buffer notification stride in units of 32-descriptors.
> + * This field must be a power of 2.
> + * @pad: Padding.
> + * @dma_head_wb_addr: Applicable only for receive buffer queues.
> + * @qflags: Applicable only for receive completion queues.
> + * See enum virtchnl2_rxq_flags.
> + * @rx_buffer_low_watermark: Rx buffer low watermark.
> + * @rx_bufq1_id: Buffer queue index of the first buffer queue associated
> with
> + * the Rx queue. Valid only in split queue model.
> + * @rx_bufq2_id: Buffer queue index of the second buffer queue
> associated with
> + * the Rx queue. Valid only in split queue model.
> + * @bufq2_ena: It indicates if there is a second buffer, rx_bufq2_id is valid
> + * only if this field is set.
> + * @pad1: Padding.
> + * @ingress_pasid: Ingress PASID.
> + * @ingress_hdr_pasid: Ingress PASID header.
> + * @ingress_buf_pasid: Ingress PASID buffer.
> + * @pad2: Padding for future extensions.
> + */
> +struct virtchnl2_rxq_info {
> + __le64 desc_ids;
> + __le64 dma_ring_addr;
> + __le32 type;
> + __le32 queue_id;
> + __le16 model;
> + __le16 hdr_buffer_size;
> + __le32 data_buffer_size;
> + __le32 max_pkt_size;
> + __le16 ring_len;
> + u8 buffer_notif_stride;
> + u8 pad;
> + __le64 dma_head_wb_addr;
> + __le16 qflags;
> + __le16 rx_buffer_low_watermark;
> + __le16 rx_bufq1_id;
> + __le16 rx_bufq2_id;
> + u8 bufq2_ena;
> + u8 pad1[3];
> + __le32 ingress_pasid;
> + __le32 ingress_hdr_pasid;
> + __le32 ingress_buf_pasid;
> + u8 pad2[16];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(88, virtchnl2_rxq_info);
> +
> +/**
> + * struct virtchnl2_config_rx_queues - Rx queues config.
> + * @vport_id: Vport id.
> + * @num_qinfo: Number of instances.
> + * @pad: Padding.
> + * @qinfo: Rx queues config info.
> + *
> + * PF sends this message to set up parameters for one or more receive
> queues.
> + * This message contains an array of num_qinfo instances of
> virtchnl2_rxq_info
> + * structures. CP configures requested queues and returns a status code.
> + * If the number of queues specified is greater than the number of queues
> + * associated with the vport, an error is returned and no queues are
> configured.
> + *
> + * Associated with VIRTCHNL2_OP_CONFIG_RX_QUEUES.
> + */
> +struct virtchnl2_config_rx_queues {
> + __le32 vport_id;
> + __le16 num_qinfo;
> + u8 pad[18];
> + struct virtchnl2_rxq_info qinfo[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_config_rx_queues);
> +
> +/**
> + * struct virtchnl2_add_queues - data for VIRTCHNL2_OP_ADD_QUEUES.
> + * @vport_id: Vport id.
> + * @num_tx_q: Number of Tx qieues.
> + * @num_tx_complq: Number of Tx completion queues.
> + * @num_rx_q: Number of Rx queues.
> + * @num_rx_bufq: Number of Rx buffer queues.
> + * @pad: Padding.
> + * @chunks: Chunks of contiguous queues.
> + *
> + * PF sends this message to request additional transmit/receive queues
> beyond
> + * the ones that were assigned via CREATE_VPORT request.
> virtchnl2_add_queues
> + * structure is used to specify the number of each type of queues.
> + * CP responds with the same structure with the actual number of queues
> assigned
> + * followed by num_chunks of virtchnl2_queue_chunk structures.
> + *
> + * Associated with VIRTCHNL2_OP_ADD_QUEUES.
> + */
> +struct virtchnl2_add_queues {
> + __le32 vport_id;
> + __le16 num_tx_q;
> + __le16 num_tx_complq;
> + __le16 num_rx_q;
> + __le16 num_rx_bufq;
> + u8 pad[4];
> + struct virtchnl2_queue_reg_chunks chunks;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_add_queues);
> +
> +/**
> + * struct virtchnl2_vector_chunk - Structure to specify a chunk of contiguous
> + * interrupt vectors.
> + * @start_vector_id: Start vector id.
> + * @start_evv_id: Start EVV id.
> + * @num_vectors: Number of vectors.
> + * @pad: Padding.
> + * @dynctl_reg_start: DYN_CTL register offset.
> + * @dynctl_reg_spacing: register spacing between DYN_CTL registers of 2
> + * consecutive vectors.
> + * @itrn_reg_start: ITRN register offset.
> + * @itrn_reg_spacing: Register spacing between dynctl registers of 2
> + * consecutive vectors.
> + * @itrn_index_spacing: Register spacing between itrn registers of the
> same
> + * vector where n=0..2.
> + * @pad1: Padding for future extensions.
> + *
> + * Register offsets and spacing provided by CP.
> + * Dynamic control registers are used for enabling/disabling/re-enabling
> + * interrupts and updating interrupt rates in the hotpath. Any changes
> + * to interrupt rates in the dynamic control registers will be reflected
> + * in the interrupt throttling rate registers.
> + * itrn registers are used to update interrupt rates for specific
> + * interrupt indices without modifying the state of the interrupt.
> + */
> +struct virtchnl2_vector_chunk {
> + __le16 start_vector_id;
> + __le16 start_evv_id;
> + __le16 num_vectors;
> + __le16 pad;
> + __le32 dynctl_reg_start;
> + __le32 dynctl_reg_spacing;
> + __le32 itrn_reg_start;
> + __le32 itrn_reg_spacing;
> + __le32 itrn_index_spacing;
> + u8 pad1[4];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_vector_chunk);
> +
> +/**
> + * struct virtchnl2_vector_chunks - chunks of contiguous interrupt vectors.
> + * @num_vchunks: number of vector chunks.
> + * @pad: Padding.
> + * @vchunks: Chunks of contiguous vector info.
> + *
> + * PF sends virtchnl2_vector_chunks struct to specify the vectors it is giving
> + * away. CP performs requested action and returns status.
> + *
> + * Associated with VIRTCHNL2_OP_DEALLOC_VECTORS.
> + */
> +struct virtchnl2_vector_chunks {
> + __le16 num_vchunks;
> + u8 pad[14];
> + struct virtchnl2_vector_chunk vchunks[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_vector_chunks);
> +
> +/**
> + * struct virtchnl2_alloc_vectors - vector allocation info.
> + * @num_vectors: Number of vectors.
> + * @pad: Padding.
> + * @vchunks: Chunks of contiguous vector info.
> + *
> + * PF sends this message to request additional interrupt vectors beyond the
> + * ones that were assigned via GET_CAPS request. virtchnl2_alloc_vectors
> + * structure is used to specify the number of vectors requested. CP
> responds
> + * with the same structure with the actual number of vectors assigned
> followed
> + * by virtchnl2_vector_chunks structure identifying the vector ids.
> + *
> + * Associated with VIRTCHNL2_OP_ALLOC_VECTORS.
> + */
> +struct virtchnl2_alloc_vectors {
> + __le16 num_vectors;
> + u8 pad[14];
> + struct virtchnl2_vector_chunks vchunks;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_alloc_vectors);
> +
> +/**
> + * struct virtchnl2_rss_lut - RSS LUT info.
> + * @vport_id: Vport id.
> + * @lut_entries_start: Start of LUT entries.
> + * @lut_entries: Number of LUT entrties.
> + * @pad: Padding.
> + * @lut: RSS lookup table.
> + *
> + * PF sends this message to get or set RSS lookup table. Only supported if
> + * both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit during
> configuration
> + * negotiation.
> + *
> + * Associated with VIRTCHNL2_OP_GET_RSS_LUT and
> VIRTCHNL2_OP_SET_RSS_LUT.
> + */
> +struct virtchnl2_rss_lut {
> + __le32 vport_id;
> + __le16 lut_entries_start;
> + __le16 lut_entries;
> + u8 pad[4];
> + __le32 lut[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(12, virtchnl2_rss_lut);
> +
> +/**
> + * struct virtchnl2_rss_hash - RSS hash info.
> + * @ptype_groups: Packet type groups bitmap.
> + * @vport_id: Vport id.
> + * @pad: Padding for future extensions.
> + *
> + * PF sends these messages to get and set the hash filter enable bits for
> RSS.
> + * By default, the CP sets these to all possible traffic types that the
> + * hardware supports. The PF can query this value if it wants to change the
> + * traffic types that are hashed by the hardware.
> + * Only supported if both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit
> + * during configuration negotiation.
> + *
> + * Associated with VIRTCHNL2_OP_GET_RSS_HASH and
> VIRTCHNL2_OP_SET_RSS_HASH
> + */
> +struct virtchnl2_rss_hash {
> + __le64 ptype_groups;
> + __le32 vport_id;
> + u8 pad[4];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_rss_hash);
> +
> +/**
> + * struct virtchnl2_sriov_vfs_info - VFs info.
> + * @num_vfs: Number of VFs.
> + * @pad: Padding for future extensions.
> + *
> + * This message is used to set number of SRIOV VFs to be created. The
> actual
> + * allocation of resources for the VFs in terms of vport, queues and
> interrupts
> + * is done by CP. When this call completes, the IDPF driver calls
> + * pci_enable_sriov to let the OS instantiate the SRIOV PCIE devices.
> + * The number of VFs set to 0 will destroy all the VFs of this function.
> + *
> + * Associated with VIRTCHNL2_OP_SET_SRIOV_VFS.
> + */
> +struct virtchnl2_sriov_vfs_info {
> + __le16 num_vfs;
> + __le16 pad;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(4, virtchnl2_sriov_vfs_info);
> +
> +/**
> + * struct virtchnl2_ptype - Packet type info.
> + * @ptype_id_10: 10-bit packet type.
> + * @ptype_id_8: 8-bit packet type.
> + * @proto_id_count: Number of protocol ids the packet supports,
> maximum of 32
> + * protocol ids are supported.
> + * @pad: Padding.
> + * @proto_id: proto_id_count decides the allocation of protocol id array.
> + * See enum virtchnl2_proto_hdr_type.
> + *
> + * Based on the descriptor type the PF supports, CP fills ptype_id_10 or
> + * ptype_id_8 for flex and base descriptor respectively. If ptype_id_10
> value
> + * is set to 0xFFFF, PF should consider this ptype as dummy one and it is the
> + * last ptype.
> + */
> +struct virtchnl2_ptype {
> + __le16 ptype_id_10;
> + u8 ptype_id_8;
> + u8 proto_id_count;
> + __le16 pad;
> + __le16 proto_id[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
> +
> +/**
> + * struct virtchnl2_get_ptype_info - Packet type info.
> + * @start_ptype_id: Starting ptype ID.
> + * @num_ptypes: Number of packet types from start_ptype_id.
> + * @pad: Padding for future extensions.
> + *
> + * The total number of supported packet types is based on the descriptor
> type.
> + * For the flex descriptor, it is 1024 (10-bit ptype), and for the base
> + * descriptor, it is 256 (8-bit ptype). Send this message to the CP by
> + * populating the 'start_ptype_id' and the 'num_ptypes'. CP responds with
> the
> + * 'start_ptype_id', 'num_ptypes', and the array of ptype (virtchnl2_ptype)
> that
> + * are added at the end of the 'virtchnl2_get_ptype_info' message (Note:
> There
> + * is no specific field for the ptypes but are added at the end of the
> + * ptype info message. PF/VF is expected to extract the ptypes accordingly.
> + * Reason for doing this is because compiler doesn't allow nested flexible
> + * array fields).
> + *
> + * If all the ptypes don't fit into one mailbox buffer, CP splits the
> + * ptype info into multiple messages, where each message will have its own
> + * 'start_ptype_id', 'num_ptypes', and the ptype array itself. When CP is
> done
> + * updating all the ptype information extracted from the package (the
> number of
> + * ptypes extracted might be less than what PF/VF expects), it will append a
> + * dummy ptype (which has 'ptype_id_10' of 'struct virtchnl2_ptype' as
> 0xFFFF)
> + * to the ptype array.
> + *
> + * PF/VF is expected to receive multiple VIRTCHNL2_OP_GET_PTYPE_INFO
> messages.
> + *
> + * Associated with VIRTCHNL2_OP_GET_PTYPE_INFO.
> + */
> +struct virtchnl2_get_ptype_info {
> + __le16 start_ptype_id;
> + __le16 num_ptypes;
> + __le32 pad;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_get_ptype_info);
> +
> +/**
> + * struct virtchnl2_vport_stats - Vport statistics.
> + * @vport_id: Vport id.
> + * @pad: Padding.
> + * @rx_bytes: Received bytes.
> + * @rx_unicast: Received unicast packets.
> + * @rx_multicast: Received multicast packets.
> + * @rx_broadcast: Received broadcast packets.
> + * @rx_discards: Discarded packets on receive.
> + * @rx_errors: Receive errors.
> + * @rx_unknown_protocol: Unlnown protocol.
> + * @tx_bytes: Transmitted bytes.
> + * @tx_unicast: Transmitted unicast packets.
> + * @tx_multicast: Transmitted multicast packets.
> + * @tx_broadcast: Transmitted broadcast packets.
> + * @tx_discards: Discarded packets on transmit.
> + * @tx_errors: Transmit errors.
> + * @rx_invalid_frame_length: Packets with invalid frame length.
> + * @rx_overflow_drop: Packets dropped on buffer overflow.
> + *
> + * PF/VF sends this message to CP to get the update stats by specifying the
> + * vport_id. CP responds with stats in struct virtchnl2_vport_stats.
> + *
> + * Associated with VIRTCHNL2_OP_GET_STATS.
> + */
> +struct virtchnl2_vport_stats {
> + __le32 vport_id;
> + u8 pad[4];
> + __le64 rx_bytes;
> + __le64 rx_unicast;
> + __le64 rx_multicast;
> + __le64 rx_broadcast;
> + __le64 rx_discards;
> + __le64 rx_errors;
> + __le64 rx_unknown_protocol;
> + __le64 tx_bytes;
> + __le64 tx_unicast;
> + __le64 tx_multicast;
> + __le64 tx_broadcast;
> + __le64 tx_discards;
> + __le64 tx_errors;
> + __le64 rx_invalid_frame_length;
> + __le64 rx_overflow_drop;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(128, virtchnl2_vport_stats);
> +
> +/**
> + * struct virtchnl2_event - Event info.
> + * @event: Event opcode. See enum virtchnl2_event_codes.
> + * @link_speed: Link_speed provided in Mbps.
> + * @vport_id: Vport ID.
> + * @link_status: Link status.
> + * @pad: Padding.
> + * @reserved: Reserved.
> + *
> + * CP sends this message to inform the PF/VF driver of events that may
> affect
> + * it. No direct response is expected from the driver, though it may
> generate
> + * other messages in response to this one.
> + *
> + * Associated with VIRTCHNL2_OP_EVENT.
> + */
> +struct virtchnl2_event {
> + __le32 event;
> + __le32 link_speed;
> + __le32 vport_id;
> + u8 link_status;
> + u8 pad;
> + __le16 reserved;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_event);
> +
> +/**
> + * struct virtchnl2_rss_key - RSS key info.
> + * @vport_id: Vport id.
> + * @key_len: Length of RSS key.
> + * @pad: Padding.
> + * @key_flex: RSS hash key, packed bytes.
> + * PF/VF sends this message to get or set RSS key. Only supported if both
> + * PF/VF and CP drivers set the VIRTCHNL2_CAP_RSS bit during
> configuration
> + * negotiation.
> + *
> + * Associated with VIRTCHNL2_OP_GET_RSS_KEY and
> VIRTCHNL2_OP_SET_RSS_KEY.
> + */
> +struct virtchnl2_rss_key {
> + __le32 vport_id;
> + __le16 key_len;
> + u8 pad;
> + __DECLARE_FLEX_ARRAY(u8, key_flex);
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_rss_key);
> +
> +/**
> + * struct virtchnl2_queue_chunk - chunk of contiguous queues
> + * @type: See enum virtchnl2_queue_type.
> + * @start_queue_id: Starting queue id.
> + * @num_queues: Number of queues.
> + * @pad: Padding for future extensions.
> + */
> +struct virtchnl2_queue_chunk {
> + __le32 type;
> + __le32 start_queue_id;
> + __le32 num_queues;
> + u8 pad[4];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_chunk);
> +
> +/* struct virtchnl2_queue_chunks - chunks of contiguous queues
> + * @num_chunks: Number of chunks.
> + * @pad: Padding.
> + * @chunks: Chunks of contiguous queues info.
> + */
> +struct virtchnl2_queue_chunks {
> + __le16 num_chunks;
> + u8 pad[6];
> + struct virtchnl2_queue_chunk chunks[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_chunks);
> +
> +/**
> + * struct virtchnl2_del_ena_dis_queues - Enable/disable queues info.
> + * @vport_id: Vport id.
> + * @pad: Padding.
> + * @chunks: Chunks of contiguous queues info.
> + *
> + * PF sends these messages to enable, disable or delete queues specified in
> + * chunks. PF sends virtchnl2_del_ena_dis_queues struct to specify the
> queues
> + * to be enabled/disabled/deleted. Also applicable to single queue receive
> or
> + * transmit. CP performs requested action and returns status.
> + *
> + * Associated with VIRTCHNL2_OP_ENABLE_QUEUES,
> VIRTCHNL2_OP_DISABLE_QUEUES and
> + * VIRTCHNL2_OP_DISABLE_QUEUES.
> + */
> +struct virtchnl2_del_ena_dis_queues {
> + __le32 vport_id;
> + u8 pad[4];
> + struct virtchnl2_queue_chunks chunks;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_del_ena_dis_queues);
> +
> +/**
> + * struct virtchnl2_queue_vector - Queue to vector mapping.
> + * @queue_id: Queue id.
> + * @vector_id: Vector id.
> + * @pad: Padding.
> + * @itr_idx: See enum virtchnl2_itr_idx.
> + * @queue_type: See enum virtchnl2_queue_type.
> + * @pad1: Padding for future extensions.
> + */
> +struct virtchnl2_queue_vector {
> + __le32 queue_id;
> + __le16 vector_id;
> + u8 pad[2];
> + __le32 itr_idx;
> + __le32 queue_type;
> + u8 pad1[8];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_queue_vector);
> +
> +/**
> + * struct virtchnl2_queue_vector_maps - Map/unmap queues info.
> + * @vport_id: Vport id.
> + * @num_qv_maps: Number of queue vector maps.
> + * @pad: Padding.
> + * @qv_maps: Queue to vector maps.
> + *
> + * PF sends this message to map or unmap queues to vectors and interrupt
> + * throttling rate index registers. External data buffer contains
> + * virtchnl2_queue_vector_maps structure that contains num_qv_maps of
> + * virtchnl2_queue_vector structures. CP maps the requested queue vector
> maps
> + * after validating the queue and vector ids and returns a status code.
> + *
> + * Associated with VIRTCHNL2_OP_MAP_QUEUE_VECTOR and
> VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR.
> + */
> +struct virtchnl2_queue_vector_maps {
> + __le32 vport_id;
> + __le16 num_qv_maps;
> + u8 pad[10];
> + struct virtchnl2_queue_vector qv_maps[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_vector_maps);
> +
> +/**
> + * struct virtchnl2_loopback - Loopback info.
> + * @vport_id: Vport id.
> + * @enable: Enable/disable.
> + * @pad: Padding for future extensions.
> + *
> + * PF/VF sends this message to transition to/from the loopback state.
> Setting
> + * the 'enable' to 1 enables the loopback state and setting 'enable' to 0
> + * disables it. CP configures the state to loopback and returns status.
> + *
> + * Associated with VIRTCHNL2_OP_LOOPBACK.
> + */
> +struct virtchnl2_loopback {
> + __le32 vport_id;
> + u8 enable;
> + u8 pad[3];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_loopback);
> +
> +/* struct virtchnl2_mac_addr - MAC address info.
> + * @addr: MAC address.
> + * @type: MAC type. See enum virtchnl2_mac_addr_type.
> + * @pad: Padding for future extensions.
> + */
> +struct virtchnl2_mac_addr {
> + u8 addr[ETH_ALEN];
> + u8 type;
> + u8 pad;
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr);
> +
> +/**
> + * struct virtchnl2_mac_addr_list - List of MAC addresses.
> + * @vport_id: Vport id.
> + * @num_mac_addr: Number of MAC addresses.
> + * @pad: Padding.
> + * @mac_addr_list: List with MAC address info.
> + *
> + * PF/VF driver uses this structure to send list of MAC addresses to be
> + * added/deleted to the CP where as CP performs the action and returns
> the
> + * status.
> + *
> + * Associated with VIRTCHNL2_OP_ADD_MAC_ADDR and
> VIRTCHNL2_OP_DEL_MAC_ADDR.
> + */
> +struct virtchnl2_mac_addr_list {
> + __le32 vport_id;
> + __le16 num_mac_addr;
> + u8 pad[2];
> + struct virtchnl2_mac_addr mac_addr_list[];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr_list);
> +
> +/**
> + * struct virtchnl2_promisc_info - Promisc type info.
> + * @vport_id: Vport id.
> + * @flags: See enum virtchnl2_promisc_flags.
> + * @pad: Padding for future extensions.
> + *
> + * PF/VF sends vport id and flags to the CP where as CP performs the action
> + * and returns the status.
> + *
> + * Associated with VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE.
> + */
> +struct virtchnl2_promisc_info {
> + __le32 vport_id;
> + /* See VIRTCHNL2_PROMISC_FLAGS definitions */
> + __le16 flags;
> + u8 pad[2];
> +};
> +VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_promisc_info);
> +
> +#endif /* _VIRTCHNL_2_H_ */
> diff --git a/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
> b/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
> new file mode 100644
> index 000000000000..e2a95e6053a9
> --- /dev/null
> +++ b/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
> @@ -0,0 +1,448 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (C) 2023 Intel Corporation */
> +
> +#ifndef _VIRTCHNL2_LAN_DESC_H_
> +#define _VIRTCHNL2_LAN_DESC_H_
> +
> +#include <linux/bits.h>
> +
> +/* This is an interface definition file where existing enums and their values
> + * must remain unchanged over time, so we specify explicit values for all
> enums.
> + */
> +
> +/* Transmit descriptor ID flags
> + */
> +enum virtchnl2_tx_desc_ids {
> + VIRTCHNL2_TXDID_DATA = BIT(0),
> + VIRTCHNL2_TXDID_CTX = BIT(1),
> + /* TXDID bit 2 is reserved
> + * TXDID bit 3 is free for future use
> + * TXDID bit 4 is reserved
> + */
> + VIRTCHNL2_TXDID_FLEX_TSO_CTX = BIT(5),
> + /* TXDID bit 6 is reserved */
> + VIRTCHNL2_TXDID_FLEX_L2TAG1_L2TAG2 = BIT(7),
> + /* TXDID bits 8 and 9 are free for future use
> + * TXDID bit 10 is reserved
> + * TXDID bit 11 is free for future use
> + */
> + VIRTCHNL2_TXDID_FLEX_FLOW_SCHED =
> BIT(12),
> + /* TXDID bits 13 and 14 are free for future use */
> + VIRTCHNL2_TXDID_DESC_DONE = BIT(15),
> +};
> +
> +/* Receive descriptor IDs */
> +enum virtchnl2_rx_desc_ids {
> + VIRTCHNL2_RXDID_1_32B_BASE = 1,
> + /* FLEX_SQ_NIC and FLEX_SPLITQ share desc ids because they can
> be
> + * differentiated based on queue model; e.g. single queue model can
> + * only use FLEX_SQ_NIC and split queue model can only use
> FLEX_SPLITQ
> + * for DID 2.
> + */
> + VIRTCHNL2_RXDID_2_FLEX_SPLITQ = 2,
> + VIRTCHNL2_RXDID_2_FLEX_SQ_NIC =
> VIRTCHNL2_RXDID_2_FLEX_SPLITQ,
> + /* 3 through 6 are reserved */
> + VIRTCHNL2_RXDID_7_HW_RSVD = 7,
> + /* 8 through 15 are free */
> +};
> +
> +/* Receive descriptor ID bitmasks */
> +#define VIRTCHNL2_RXDID_M(bit)
> BIT_ULL(VIRTCHNL2_RXDID_##bit)
> +
> +enum virtchnl2_rx_desc_id_bitmasks {
> + VIRTCHNL2_RXDID_1_32B_BASE_M =
> VIRTCHNL2_RXDID_M(1_32B_BASE),
> + VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M =
> VIRTCHNL2_RXDID_M(2_FLEX_SPLITQ),
> + VIRTCHNL2_RXDID_2_FLEX_SQ_NIC_M =
> VIRTCHNL2_RXDID_M(2_FLEX_SQ_NIC),
> + VIRTCHNL2_RXDID_7_HW_RSVD_M =
> VIRTCHNL2_RXDID_M(7_HW_RSVD),
> +};
> +
> +/* For splitq virtchnl2_rx_flex_desc_adv_nic_3 desc members */
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_RXDID_M GENMASK(3,
> 0)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_UMBCAST_M
> GENMASK(7, 6)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_M GENMASK(9,
> 0)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_S 12
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_S)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF0_M
> GENMASK(15, 13)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_LEN_PBUF_M
> GENMASK(13, 0)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_S 14
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_S)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_S 15
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_S)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_LEN_HDR_M
> GENMASK(9, 0)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_S 10
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_S)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_S 11
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_S)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF1_S 12
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF1_M
> GENMASK(14, 12)
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_S 15
> +#define VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_M \
> + BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_S)
> +
> +/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
> +enum virtchl2_rx_flex_desc_adv_status_error_0_qw1_bits {
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_DD_M
> = BIT(0),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_EOF_M =
> BIT(1),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_HBO_M =
> BIT(2),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L3L4P_M =
> BIT(3),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_M
> = BIT(4),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_M
> = BIT(5),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_M
> = BIT(6),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_M
> = BIT(7),
> +};
> +
> +/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
> +enum virtchnl2_rx_flex_desc_adv_status_error_0_qw0_bits {
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_LPBK_M =
> BIT(0),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_IPV6EXADD_M
> = BIT(1),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_RXE_M =
> BIT(2),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_CRCP_M =
> BIT(3),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_RSS_VALID_M
> = BIT(4),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L2TAG1P_M
> = BIT(5),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XTRMD0_VALID_M
> = BIT(6),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XTRMD1_VALID_M
> = BIT(7),
> +};
> +
> +/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
> +enum virtchnl2_rx_flex_desc_adv_status_error_1_bits {
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_RSVD_M =
> GENMASK(1, 0),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_ATRAEFAIL_M
> = BIT(2),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_L2TAG2P_M
> = BIT(3),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD2_VALID_M
> = BIT(4),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD3_VALID_M
> = BIT(5),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD4_VALID_M
> = BIT(6),
> + VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD5_VALID_M
> = BIT(7),
> +};
> +
> +/* For singleq (flex) virtchnl2_rx_flex_desc fields
> + * For virtchnl2_rx_flex_desc.ptype_flex_flags0 member
> + */
> +#define VIRTCHNL2_RX_FLEX_DESC_PTYPE_M
> GENMASK(9, 0)
> +
> +/* For virtchnl2_rx_flex_desc.pkt_len member */
> +#define VIRTCHNL2_RX_FLEX_DESC_PKT_LEN_M
> GENMASK(13, 0)
> +
> +/* Bitmasks for singleq (flex) virtchnl2_rx_flex_desc */
> +enum virtchnl2_rx_flex_desc_status_error_0_bits {
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_DD_M =
> BIT(0),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_EOF_M =
> BIT(1),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_HBO_M =
> BIT(2),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_L3L4P_M
> = BIT(3),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_M =
> BIT(4),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_M =
> BIT(5),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_M =
> BIT(6),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_M
> = BIT(7),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_LPBK_M
> = BIT(8),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_IPV6EXADD_M =
> BIT(9),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_RXE_M =
> BIT(10),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_CRCP_M
> = BIT(11),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_RSS_VALID_M =
> BIT(12),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_L2TAG1P_M =
> BIT(13),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XTRMD0_VALID_M
> = BIT(14),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS0_XTRMD1_VALID_M
> = BIT(15),
> +};
> +
> +/* Bitmasks for singleq (flex) virtchnl2_rx_flex_desc */
> +enum virtchnl2_rx_flex_desc_status_error_1_bits {
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_CPM_M
> = GENMASK(3, 0),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_NAT_M =
> BIT(4),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_CRYPTO_M
> = BIT(5),
> + /* [10:6] reserved */
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_L2TAG2P_M =
> BIT(11),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD2_VALID_M
> = BIT(12),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD3_VALID_M
> = BIT(13),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD4_VALID_M
> = BIT(14),
> + VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD5_VALID_M
> = BIT(15),
> +};
> +
> +/* For virtchnl2_rx_flex_desc.ts_low member */
> +#define VIRTCHNL2_RX_FLEX_TSTAMP_VALID
> BIT(0)
> +
> +/* For singleq (non flex) virtchnl2_singleq_base_rx_desc legacy desc
> members */
> +#define VIRTCHNL2_RX_BASE_DESC_QW1_LEN_PBUF_M
> GENMASK_ULL(51, 38)
> +#define VIRTCHNL2_RX_BASE_DESC_QW1_PTYPE_M
> GENMASK_ULL(37, 30)
> +#define VIRTCHNL2_RX_BASE_DESC_QW1_ERROR_M
> GENMASK_ULL(26, 19)
> +#define VIRTCHNL2_RX_BASE_DESC_QW1_STATUS_M
> GENMASK_ULL(18, 0)
> +
> +/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
> +enum virtchnl2_rx_base_desc_status_bits {
> + VIRTCHNL2_RX_BASE_DESC_STATUS_DD_M = BIT(0),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_EOF_M = BIT(1),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_L2TAG1P_M =
> BIT(2),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_L3L4P_M =
> BIT(3),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_CRCP_M = BIT(4),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_RSVD_M =
> GENMASK(7, 5),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_EXT_UDP_0_M = BIT(8),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_UMBCAST_M =
> GENMASK(10, 9),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_FLM_M = BIT(11),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_FLTSTAT_M =
> GENMASK(13, 12),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_LPBK_M = BIT(14),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_IPV6EXADD_M = BIT(15),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_RSVD1_M =
> GENMASK(17, 16),
> + VIRTCHNL2_RX_BASE_DESC_STATUS_INT_UDP_0_M = BIT(18),
> +};
> +
> +/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
> +enum virtchnl2_rx_base_desc_error_bits {
> + VIRTCHNL2_RX_BASE_DESC_ERROR_RXE_M = BIT(0),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_ATRAEFAIL_M = BIT(1),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_HBO_M = BIT(2),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_L3L4E_M =
> GENMASK(5, 3),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_IPE_M = BIT(3),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_L4E_M = BIT(4),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_EIPE_M = BIT(5),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_OVERSIZE_M =
> BIT(6),
> + VIRTCHNL2_RX_BASE_DESC_ERROR_PPRS_M = BIT(7),
> +};
> +
> +/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
> +#define VIRTCHNL2_RX_BASE_DESC_FLTSTAT_RSS_HASH_M
> GENMASK(13, 12)
> +
> +/**
> + * struct virtchnl2_splitq_rx_buf_desc - SplitQ RX buffer descriptor format
> + * @qword0: RX buffer struct.
> + * @qword0.buf_id: Buffer identifier.
> + * @qword0.rsvd0: Reserved.
> + * @qword0.rsvd1: Reserved.
> + * @pkt_addr: Packet buffer address.
> + * @hdr_addr: Header buffer address.
> + * @rsvd2: Rerserved.
> + *
> + * Receive Descriptors
> + * SplitQ buffer
> + * | 16| 0|
> + * ----------------------------------------------------------------
> + * | RSV | Buffer ID |
> + * ----------------------------------------------------------------
> + * | Rx packet buffer address |
> + * ----------------------------------------------------------------
> + * | Rx header buffer address |
> + * ----------------------------------------------------------------
> + * | RSV |
> + * ----------------------------------------------------------------
> + * | 0|
> + */
> +struct virtchnl2_splitq_rx_buf_desc {
> + struct {
> + __le16 buf_id;
> + __le16 rsvd0;
> + __le32 rsvd1;
> + } qword0;
> + __le64 pkt_addr;
> + __le64 hdr_addr;
> + __le64 rsvd2;
> +};
> +
> +/**
> + * struct virtchnl2_singleq_rx_buf_desc - SingleQ RX buffer descriptor
> format.
> + * @pkt_addr: Packet buffer address.
> + * @hdr_addr: Header buffer address.
> + * @rsvd1: Reserved.
> + * @rsvd2: Reserved.
> + *
> + * SingleQ buffer
> + * | 0|
> + * ----------------------------------------------------------------
> + * | Rx packet buffer address |
> + * ----------------------------------------------------------------
> + * | Rx header buffer address |
> + * ----------------------------------------------------------------
> + * | RSV |
> + * ----------------------------------------------------------------
> + * | RSV |
> + * ----------------------------------------------------------------
> + * | 0|
> + */
> +struct virtchnl2_singleq_rx_buf_desc {
> + __le64 pkt_addr;
> + __le64 hdr_addr;
> + __le64 rsvd1;
> + __le64 rsvd2;
> +};
> +
> +/**
> + * struct virtchnl2_singleq_base_rx_desc - RX descriptor writeback format.
> + * @qword0: First quad word struct.
> + * @qword0.lo_dword: Lower dual word struct.
> + * @qword0.lo_dword.mirroring_status: Mirrored packet status.
> + * @qword0.lo_dword.l2tag1: Stripped L2 tag from the received packet.
> + * @qword0.hi_dword: High dual word union.
> + * @qword0.hi_dword.rss: RSS hash.
> + * @qword0.hi_dword.fd_id: Flow director filter id.
> + * @qword1: Second quad word struct.
> + * @qword1.status_error_ptype_len: Status/error/PTYPE/length.
> + * @qword2: Third quad word struct.
> + * @qword2.ext_status: Extended status.
> + * @qword2.rsvd: Reserved.
> + * @qword2.l2tag2_1: Extracted L2 tag 2 from the packet.
> + * @qword2.l2tag2_2: Reserved.
> + * @qword3: Fourth quad word struct.
> + * @qword3.reserved: Reserved.
> + * @qword3.fd_id: Flow director filter id.
> + *
> + * Profile ID 0x1, SingleQ, base writeback format
> + */
> +struct virtchnl2_singleq_base_rx_desc {
> + struct {
> + struct {
> + __le16 mirroring_status;
> + __le16 l2tag1;
> + } lo_dword;
> + union {
> + __le32 rss;
> + __le32 fd_id;
> + } hi_dword;
> + } qword0;
> + struct {
> + __le64 status_error_ptype_len;
> + } qword1;
> + struct {
> + __le16 ext_status;
> + __le16 rsvd;
> + __le16 l2tag2_1;
> + __le16 l2tag2_2;
> + } qword2;
> + struct {
> + __le32 reserved;
> + __le32 fd_id;
> + } qword3;
> +};
> +
> +/**
> + * struct virtchnl2_rx_flex_desc_nic - RX descriptor writeback format.
> + *
> + * @rxdid: Descriptor builder profile id.
> + * @mir_id_umb_cast: umb_cast=[7:6], mirror=[5:0]
> + * @ptype_flex_flags0: ff0=[15:10], ptype=[9:0]
> + * @pkt_len: Packet length, [15:14] are reserved.
> + * @hdr_len_sph_flex_flags1: ff1/ext=[15:12], sph=[11], header=[10:0].
> + * @status_error0: Status/Error section 0.
> + * @l2tag1: Stripped L2 tag from the received packet
> + * @rss_hash: RSS hash.
> + * @status_error1: Status/Error section 1.
> + * @flexi_flags2: Flexible flags section 2.
> + * @ts_low: Lower word of timestamp value.
> + * @l2tag2_1st: First L2TAG2.
> + * @l2tag2_2nd: Second L2TAG2.
> + * @flow_id: Flow id.
> + * @flex_ts: Timestamp and flexible flow id union.
> + * @flex_ts.ts_high: Timestamp higher word of the timestamp value.
> + * @flex_ts.flex.rsvd: Reserved.
> + * @flex_ts.flex.flow_id_ipv6: IPv6 flow id.
> + *
> + * Profile ID 0x2, SingleQ, flex writeback format
> + */
> +struct virtchnl2_rx_flex_desc_nic {
> + /* Qword 0 */
> + u8 rxdid;
> + u8 mir_id_umb_cast;
> + __le16 ptype_flex_flags0;
> + __le16 pkt_len;
> + __le16 hdr_len_sph_flex_flags1;
> + /* Qword 1 */
> + __le16 status_error0;
> + __le16 l2tag1;
> + __le32 rss_hash;
> + /* Qword 2 */
> + __le16 status_error1;
> + u8 flexi_flags2;
> + u8 ts_low;
> + __le16 l2tag2_1st;
> + __le16 l2tag2_2nd;
> + /* Qword 3 */
> + __le32 flow_id;
> + union {
> + struct {
> + __le16 rsvd;
> + __le16 flow_id_ipv6;
> + } flex;
> + __le32 ts_high;
> + } flex_ts;
> +};
> +
> +/**
> + * struct virtchnl2_rx_flex_desc_adv_nic_3 - RX descriptor writeback
> format.
> + * @rxdid_ucast: ucast=[7:6], rsvd=[5:4], profile_id=[3:0].
> + * @status_err0_qw0: Status/Error section 0 in quad word 0.
> + * @ptype_err_fflags0: ff0=[15:12], udp_len_err=[11], ip_hdr_err=[10],
> ptype=[9:0].
> + * @pktlen_gen_bufq_id: bufq_id=[15] only in splitq, gen=[14] only in
> splitq, plen=[13:0].
> + * @hdrlen_flags: miss_prepend=[15], trunc_mirr=[14], int_udp_0=[13],
> ext_udp0=[12],
> + * sph=[11] only in splitq, rsc=[10] only in splitq, header=[9:0].
> + * @status_err0_qw1: Status/Error section 0 in quad word 1.
> + * @status_err1: Status/Error section 1.
> + * @fflags1: Flexible flags section 1.
> + * @ts_low: Lower word of timestamp value.
> + * @buf_id: Buffer identifier. Only in splitq mode.
> + * @misc: Union.
> + * @misc.raw_cs: Raw checksum.
> + * @misc.l2tag1: Stripped L2 tag from the received packet
> + * @misc.rscseglen:
> + * @hash1: Lower bits of Rx hash value.
> + * @ff2_mirrid_hash2: Union.
> + * @ff2_mirrid_hash2.fflags2: Flexible flags section 2.
> + * @ff2_mirrid_hash2.mirrorid: Mirror id.
> + * @ff2_mirrid_hash2.rscseglen: RSC segment length.
> + * @hash3: Upper bits of Rx hash value.
> + * @l2tag2: Extracted L2 tag 2 from the packet.
> + * @fmd4: Flexible metadata container 4.
> + * @l2tag1: Stripped L2 tag from the received packet
> + * @fmd6: Flexible metadata container 6.
> + * @ts_high: Timestamp higher word of the timestamp value.
> + *
> + * Profile ID 0x2, SplitQ, flex writeback format
> + *
> + * Flex-field 0: BufferID
> + * Flex-field 1: Raw checksum/L2TAG1/RSC Seg Len (determined by HW)
> + * Flex-field 2: Hash[15:0]
> + * Flex-flags 2: Hash[23:16]
> + * Flex-field 3: L2TAG2
> + * Flex-field 5: L2TAG1
> + * Flex-field 7: Timestamp (upper 32 bits)
> + */
> +struct virtchnl2_rx_flex_desc_adv_nic_3 {
> + /* Qword 0 */
> + u8 rxdid_ucast;
> + u8 status_err0_qw0;
> + __le16 ptype_err_fflags0;
> + __le16 pktlen_gen_bufq_id;
> + __le16 hdrlen_flags;
> + /* Qword 1 */
> + u8 status_err0_qw1;
> + u8 status_err1;
> + u8 fflags1;
> + u8 ts_low;
> + __le16 buf_id;
> + union {
> + __le16 raw_cs;
> + __le16 l2tag1;
> + __le16 rscseglen;
> + } misc;
> + /* Qword 2 */
> + __le16 hash1;
> + union {
> + u8 fflags2;
> + u8 mirrorid;
> + u8 hash2;
> + } ff2_mirrid_hash2;
> + u8 hash3;
> + __le16 l2tag2;
> + __le16 fmd4;
> + /* Qword 3 */
> + __le16 l2tag1;
> + __le16 fmd6;
> + __le32 ts_high;
> +};
> +
> +/* Common union for accessing descriptor format structs */
> +union virtchnl2_rx_desc {
> + struct virtchnl2_singleq_base_rx_desc base_wb;
> + struct virtchnl2_rx_flex_desc_nic flex_nic_wb;
> + struct virtchnl2_rx_flex_desc_adv_nic_3
> flex_adv_nic_3_wb;
> +};
> +
> +#endif /* _VIRTCHNL_LAN_DESC_H_ */
> --
> 2.37.3
>
> _______________________________________________
> Intel-wired-lan mailing list
> Intel-wired-lan@...osl.org
> https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
Tested-by: Krishneil Singh <krishneil.k.singh@...el.com>
Powered by blists - more mailing lists