netdev - Re: [PATCH v1 4/8] dt-bindings: can: m_can: add termination-{gpios,ohms} properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20230607230315.GA141591-robh@kernel.org>
Date: Wed, 7 Jun 2023 17:03:15 -0600
From: Rob Herring <robh@...nel.org>
To: Leonard Göhrs <l.goehrs@...gutronix.de>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>, Wolfgang Grandegger <wg@...ndegger.com>, Marc Kleine-Budde <mkl@...gutronix.de>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, kernel@...gutronix.de, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, linux-can@...r.kernel.org, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 4/8] dt-bindings: can: m_can: add
 termination-{gpios,ohms} properties

On Wed, Jun 07, 2023 at 01:55:03PM +0200, Leonard Göhrs wrote:
> The termination-gpios property allows specifying a GPIO pin that
> enables/disables a termination resistor on said CAN interface.
> The termination-ohms property specifies the resistance of said resistor.
> 
> Signed-off-by: Leonard Göhrs <l.goehrs@...gutronix.de>
> ---
>  Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> index 67879aab623b5..106c79fa560c3 100644
> --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> @@ -118,6 +118,9 @@ properties:
>    phys:
>      maxItems: 1
>  
> +  termination-gpios: true
> +  termination-ohms: true

All you should need here is change additionalProperties to 
unevaluatedProperties as these are defined by can-controller.yaml.

> +
>  required:
>    - compatible
>    - reg
> -- 
> 2.39.2
>